In this video, we show you how to Change the Motor Sleeve on a Paslode IM65 Nail Gun. Click here for a full list of parts, tools & transcript!
Spare Parts for a Paslode IM65 Nail Gun:
Motor Sleeve:
bit.ly/3jTTbji
Web: www.lsengineers.co.uk/
Facebook: / lsengineers
Twitter: / ls_engineers
Instagram: /
Blog: www.lsengineers.co.uk/blog.ht...
Health & Safety Warning Please ensure that you have safely prepared the machine and work space. If you are unsure about any aspect of the task please seek professional advice.
Transcript
Today we're going to replace the motor sleeve on a Paslode IM65 Nailer.
Remove the two screws from either side of the cap.
Remove the 4 shoulder screws using the provided allen key.
You can now remove the cap.
Unplug the fan motor wires, spark wire and the insulator.
Then remove the cylinder head by twisting.
Disconnect the retaining ring.
Using an allen key loosen the grub screw.
You can now simply slide off the fan.
Remove the motor.
You can now access the motor sleeve.
Using a tool, pick out the motor sleeve.
Clean the old motor sleeve or replace it if worn.
Place back into position until flush, you might want to use a flat headed screwdriver to adjust.
Put the motor back into place.
Now secure the fan and tighten it with the grub screw.
Secure the retaining ring.
Place the cylinder head back into position.
Connect the two fan motor wires back and spark wire.
Place the cap back over the cylinder head until flush.
Secure with the 6 screws.
That's how you replace the motor sleeve on a Paslode IM65 Nailer.
If you have any issues, questions or would like to talk to our customer service team please visit our website. Please note L&S is a UK based trading company, please see our website for information on delivery to other countries.
Негізгі бет Тәжірибелік нұсқаулар және стиль How to Change the Motor Sleeve on a Paslode IM65 Nail Gun | L&S Engineers
Пікірлер