How to change the oil and filter on a Yamaha WR155R is very easy
buy yamaha wr155r vixion r15 mt15 xabre mx king oil filter
shopee shope.ee/4ANYOQsn9W 🔥
Tokopedia tokopedia.link/LZpk7ZKLtsb ✅
____________________
Related Blog Link Video 🔗 pertamax7.com/2020/08/05/harg...
Support Pertamax7 through Saweria saweria.co/pertamax7
This video is sponsored by www.pertamax7.com
____________________
Social Media Accounts 🦸♀️
Instagram : / pertamax7
Facebook FB: / pertamaxtujuh
Twitter : / ipanase
Tik Tok: / pertamax7com
____________________
Music 🎶 Song: Ikson - Skyline (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • Ikson - Skyline (Vlog ...
____________________
Join this channel to get access to various benefits:
/ @pertamax7-hd
__________________
Explanation ❄ Change Wr155R oil
To change engine oil (with or without oil filter element replacement)
1. Turn on the engine, warm it up for a few minutes, then turn it off.
2. Place an oil pan under the engine to collect used oil.
3. Remove the engine oil filler cap and drain bolt along with the O-ring, compression spring and engine oil filter, to drain the oil from the engine crankcase.
SEE:
When removing the engine oil drain bolt, the O-ring, compression spring and oil filter will come off. Be careful not to lose these parts
4. Clean the engine oil filter with solvent.
5. Remove the oil filter element cover by removing the bolts.
6. Remove and replace the oil filter element and O-ring.
7. Install the oil filter element cover by installing the bolts, then tighten to the specified torque.
Make sure the O-ring is installed correctly.
Oil filter element cover bolt: 10 N•m (1.0 kgf•m, 7.4 lb•ft)
8. Install the engine oil filter, compression spring, O-ring and engine oil drain bolt, then tighten to the specified torque.
NOTICE: Before installing the engine oil drain bolt, do not install the O-ring, compression spring and oil filter in position.
Engine oil drain bolt: 32 N•m (3.2 kgf•m, 24 lb•ft)
9. Refill the engine oil with the recommended amount, then install and tighten the oil filler cap.
Oil quantity:
Oil change: 0.85 L (0.90 US qt, 0.75 Imp.qt)
With oil filter removal: 0.95 L (1.00 US qt, 0.84 Imp.qt)
To prevent clutch slippage (because engine oil also lubricates the clutch), don't do it
mix in any additional chemicals.
Do not use oil with diesel specification “CD” or oil of a higher quality than specified. Also, do not use oil labeled “ENERGY CONSERVING II” or higher.
Make sure that no foreign objects enter the engine crankcase.
10. Start the engine, then let it sit for a few minutes while checking for oil leaks. If oil leaks, immediately stop the engine and check the cause.
11. Stop the engine, then check the oil level and correct if necessary.
____________________
Thank you for watching the video from Pertamax7.com
Don't forget to like, comment and subscribe if you like 🙏
#yamaha #wr155r #vixion #oil change #yamahawr15r #oilwr155r #yamaha oil filter
Негізгі бет Автокөліктер мен көлік құралдары How to change the oil and filter on the Yamaha WR155R turns out to be very easy 😎
Пікірлер: 190