Thank you so much! Your videos are very helpful to us Xterra owners.
@Rythecarguy
7 жыл бұрын
+Lance Early of course! Im glad you like them.
@kellysmith1029
9 ай бұрын
Thank you, I'm going out and changing my Nissan 2006 XTERRAs oil this afternoon. Definately helpful. Definately
@dennisgoebel731
2 жыл бұрын
Great video as always! I've always changed the oil in all of my vehicles, but I was spooked by the skid plate when I bought my Xterra and started having it done for me. I had no idea that all you had to do was remove the access panel, and there was a nice little chute for the oil from the filter! Thanks for doing what you do!
@dlg5485
6 жыл бұрын
It's a pain trying to get at the filter thru that tiny access hole. After struggling with it the first time, I decided to remove the skid plate for my 2nd oil change. It takes a few minutes extra, but it makes getting at the filter so much easier and prevents making a mess with oil leaking on top of the skid plate. There are 6 screws attaching the plastic air dam, 4 screws attaching the bumper assy to the skid plate, and 4 screws attaching the skid plate to the frame...14 screws total. It sounds like a lot, but it literally takes 5 minutes extra and made it much easier, imo.
@dal7143
3 жыл бұрын
Thank you. I know absolutely nothing about cars and your video made sense.
@Rythecarguy
3 жыл бұрын
That’s why I’m here! Glad to help. 🤘🏻
@hybrid902000
Жыл бұрын
Hey Ry, can you please do a video on how to drain and fill the Xterra’s coolant? Haven’t been able to find a good video that includes burping the system the correct way since the xterra is a bit different from the typical cooling system. Thanks!
@samkemp8921
Жыл бұрын
Thank you. I couldn't find the oil filter. Great video. Very easy to understand.
@Rythecarguy
Жыл бұрын
You're welcome! Glad it helped.
@UnspecifiedHandle
5 жыл бұрын
Ah, skid plate access holes. I think they're sharpened before they leave the factory.
@Rythecarguy
5 жыл бұрын
Haha so true! It’s insane.
@1cruzian
3 жыл бұрын
Good one😆
@Tekneeq1
6 жыл бұрын
Thank you. Though I should've used my owners manual as well, the diagram helped me identify some other parts I already knew and was sure of but needed reassurance.
@Synergy14
Жыл бұрын
Ry - thanks for the clear video. My Xterra was due for its first oil change since I got it and your video helped me a lot! My only problem was that the filter didn’t fit through the access hole! Neither the old one nor the new one. I had to go in through the side to pull it out and it made quite the mess. Maybe others have had this problem too?
@Rythecarguy
Жыл бұрын
You're welcome and yes that's so annoying!! Some of the aftermarket ones are really big. The OEM one fits just fine though.
@pussndick
Жыл бұрын
I was drunk and being a smart ass the last time I commented. Sorry about that. Your vids are awesome bro, I appreciate them very much 👍
@Rythecarguy
Жыл бұрын
All good my dude. Thank you.👍🏻
@drivinovru
6 жыл бұрын
I'm glad I'm not the only one that get's a little oil on the ground when taking the oil filter off. I'm seriously thinking of relocating the oil filter. I removed the factory oil drain plug with one that has a nob to open.
@j0annamerica
4 жыл бұрын
Thank you so much for this video, simple and well explained
@lprater11
4 жыл бұрын
Lol, the "nice" oil pan through the access plate. Changing the oil on a Nissan Frontier is the biggest, messiest pain ever. That access port is made for someone with child's hands. The pan never catches all the oil. It's always a dripping, horrible mess. Worst design ever. Nissan engineer1: "Changing the oil will be the number one maintenance task for our end users. How can we make it as unpleasant as possible?" Nissan engineer2: "I've got it! We'll mount the oil filter horizontally." Nissan engineer1: "Great idea! That will ensure that oil always gets everywhere and drips randomly whenever the filter is removed." Nissan engineer2: "I'm not done. We'll make an access hole that's too small for anyone except a child to reach through, ensuring that a man's hand holding an oil filter will not be able to exit the hole while also allowing the oil to drain without a mess. The edges of the access hole will be razor sharp so that it's also painful to remove the oil filter. In addition, we'll install a pan ramp to give the owner hope that it will guide the oil in a controlled way while it drains, but we'll make the pan too narrow and too shallow to actually hold all the oil that drains out of the filter so that a mess is 100 percent ensured." Nissan engineer1: "G*ddamn it Johnson, you're a genius." Great video though.
@nickauroraco4750
4 жыл бұрын
I let the filter drain and reach over the passenger side of the skid plate when the filter is tipped up. Then install through the filter access.
@radishfox308
4 жыл бұрын
This comment is extremely underrated. I just got out from under my 2014 Xterra about an hour ago and said pretty much the same haha
@johnyohannan4561
2 жыл бұрын
Just remove the skid plate. It's a few more bolts, but makes the filter change a breeze and no mess. Might even take less time overall.
@wellnessotr
Жыл бұрын
🙌🏽🤙🏽 As always. Thank you for a great video. I’m a newbie, but having a blast learning.
@Rythecarguy
Жыл бұрын
You are so welcome!
@nnylareed
8 жыл бұрын
Thank you so much for putting up Xterra 2nd Gen maintenance videos. If it's not already on your list can you do a video on all the spark plugs?
@Rythecarguy
8 жыл бұрын
+NYLA It was not on my list but I love the idea. Thank you. If the sparkplugs were cared for as much as the rest of the truck was then I'm sure they need to be replaced.
@Rythecarguy
8 жыл бұрын
+NYLA Planning on getting the spark plugs today and creating the video this afternoon. Look for the video within the next day or so.
@nnylareed
8 жыл бұрын
+Ry the car guy Great! And would there be a reason to upgrade E3 spark plugs these days?
@Rythecarguy
8 жыл бұрын
+NYLA Honestly I think of spark plugs as a personal choice. In my opinion if you are not doing anything with your truck that puts extra strain on the motor then you will be more than ok using the Nissan recommended spark plug (NGK double platinum). Actually, I bought ever cheaper double platinum's from autolite because I bought my Xterra basically so I would have a project truck for youtube videos.
@aaronwism
7 жыл бұрын
not an upgrade you use manufacture spark plugs NGK NOTHING ELSE
@LilPhat-ll9lx
3 ай бұрын
Appreciate you big bro ❤ because of you , I’ve done starter replacement , both new headlight and front grill also new electric motor for the driver door window 🎉
@Rythecarguy
3 ай бұрын
Glad I could help. Love hearing stuff like this.
@waleedmuhammad1309
3 жыл бұрын
Very informative
@Rythecarguy
3 жыл бұрын
Thanks. 😀
@rlcodispoti
4 жыл бұрын
It seems like it's recommended to replace the crush washer on the drain plug after every service, have you done this in later oil changes or has it not mattered? Trying to get everything I need to do this myself but am confused about whether it's required or not (I did order them anyway since they're cheap).
@sephiros9883
6 жыл бұрын
The only thing I'd do differently is to open the oil cap first before the drain plug. It's a good habit to have when you change any fluids to always make sure you can refill before draining or else you're out of luck!
@matthewalston1226
5 жыл бұрын
Huh? Are you smoking meth before changing your oil?
@Mr_Chode
Жыл бұрын
@@matthewalston1226 Hes not completely wrong, usually its applied to things like; transfer cases or differentials. Doing it for engine oil is most certainly a stretch but i get it. lol
@pnw_machinist
7 жыл бұрын
Hey man, just wanted to say thanks for all the Xterra vids! They have been super helpful and informative. I bought a used '08 Xterra (6-speed 2wd manual) a couple years ago and its sitting just under 85,000 mi now and I'm starting to change Trans, rear dif fluids and probably get a coolant flush in near future for the first time. But I wanted to pick your brain about the brake and clutch fluid. I'm just not sure if it needs flushing and replacing. my biggest fear is running old\bad fluid. Any insight? Thanks so much man. Have a good one.
@chinohorse3494
6 жыл бұрын
Thanks a lot for your help.. Could you send me the link for the Xterra guide book please. I didn't get it when bought my 2008 Nissan Xterra.
@alfredoguerra5454
11 ай бұрын
Thank you Amigo
@kenlindheimer1476
5 жыл бұрын
I wondered where that oil filter was Thanks
@williammoore6952
3 жыл бұрын
Great video!!! Thank you!!! I have a 2010 xterra. My right rear body step is broke from the previous owner. It is still in the rear quarter panel Is that difficult to replace? Thx William
@Rythecarguy
3 жыл бұрын
Nope, Just pop it off!
@williammoore6952
3 жыл бұрын
Thx for the reply. Would you be willing to listen to a video recording? I bought my xterra around a month ago and I believe it has a bad timing chain or a lifter or a rod going out. I was hoping to get a expert opinion. Thx a bunch William
@pokergirls
3 жыл бұрын
Really just needed to find the oil filter - unfortunately the audio drops off, when Ry talks about the access area. Probably some good info there - just can't hear it.
@mxcollin95
Жыл бұрын
Great video…thanks for posting!
@Rythecarguy
Жыл бұрын
You're welcome, thanks for watching!! 💪🏻
@bassmaniacriley69
11 ай бұрын
You can actually take the oil filter off by hand??? I’ve never tried that. Same with tightening it too. Wow.
@Rythecarguy
11 ай бұрын
I'm unbelievably strong. Like other worldly. 🤣😂 of course I'm kidding but yes. That's how I do all oil filters.
@genericdude6551
3 жыл бұрын
I was looking through the owners manual and it says to use 5W30 ester blend motor oil (NISSAN recommends Genuine NISSAN Ester Oil). What is ester blend motor oil? Why can't I use full synthetic 5w30 oil instead? Or are they the same thing? Amazon says that the Valvoline full synthetic 5W30 is compatible with the 2014 Xterra while Walmart says it isn't.
@MrResin-xk2mf
11 ай бұрын
Please make sure your plug has a good gasket on it. It makes a huge difference. And they aren’t expensive or difficult to replace.
@MrResin-xk2mf
11 ай бұрын
Also, in addition to adding the bit of oil via finger around the seal, I always pour a tiny bit of fresh oil into my brand new filter before installation. The point of adding the oil around the seal is that, among other things, it makes it easier to remove the next time you change your oil. Putting fresh oil into a fresh filter helps prime it. If this is bad advice, please tell me now, because I’ve had success with this for many years
@Rythecarguy
11 ай бұрын
No it's great. If you buy your filter from Nissan they usually just give you a crush washer along with it. The oil in the filter is good but ruining your engine without oil pressure for a couple seconds really shouldn't hurt anything. But pre-filling the filter can certainly only help.
@SuperMike1951
4 жыл бұрын
What should the frequency between oil changes? I do put light trailers. I also use synthetic.
@neilyakuza6595
6 жыл бұрын
Ry do you have a video on the flood lamps on the top for repair, wiring...ect?
@Rythecarguy
6 жыл бұрын
Im sorry i do not.
@freddyalvaradovindas2014
6 жыл бұрын
My xterra 2005, spend a lot of oil, 1/4 of a liter every 100 miles, but do not smoke, can you help me with information? thanks for the help, greetings from Costa Rica.
@Leatherkid01
6 жыл бұрын
Some .... Such as this.... Could also be used as a guide for 05+ 4.0L frontier owners....(excluding the skid plate access hole haha) . The Frontiers engine compartment set up is almost identical
@Rythecarguy
6 жыл бұрын
Correct, I think the Armada of similar years should have this configuration as well.
@Patrick-qi3ws
6 жыл бұрын
Another great video Ry. Thanks a bunch!
@billbopepe4505
7 жыл бұрын
I think my skid plate access cover thing was cross threaded because no matter how many times I tried to loosen it the bolts it would just turn without making any progress down. Was this with yours too,or is it a personal problem for me
@Rythecarguy
7 жыл бұрын
+bill bopepe mine is fine. Maybe someone over tightened yours as some point.
@matter5177
3 жыл бұрын
Thanks for the help!
@Rythecarguy
3 жыл бұрын
You're welcome! Thanks for watching.
@jujube6395
2 жыл бұрын
Thanks for the video good info.
@Rythecarguy
2 жыл бұрын
You're welcome. 💪🏻
@guapo2012
2 жыл бұрын
Great video !
@Rythecarguy
2 жыл бұрын
Glad you enjoyed it
@javakhyan
8 жыл бұрын
Thank you so much my friend, and another question, how to replace a fuel filter? Where is the fuel filter?
@Rythecarguy
8 жыл бұрын
+Ashot Javakhyan The main fuel filter is inside the fuel pump. You have to remove the entire gas tank to get to it.
@sebronhall3959
Жыл бұрын
Great video bro.
@Rythecarguy
Жыл бұрын
Thanks for watching man I appreciate it
@user-xf6yd5ky1d
4 жыл бұрын
Thank you so much
@altruism8637
5 жыл бұрын
Ry why are there a couple tiny (rusty) holes in each of my catalytic converters? I’m pretty sure they are the cat’s..someone said someone drilled holes but its hard to tell if its rusty eroded metal or not. Do yours have hole? Have an email or something?
@spointoforderb87
4 жыл бұрын
Thank you. This is my next project. ( I have an 06 ) After that it is trying to understand why our service engine light is on. :)
@paulnegron7172
4 жыл бұрын
This is a great video!
@Rythecarguy
4 жыл бұрын
Thanks!
@nataliaandetienne8221
4 жыл бұрын
How many litres of oil did you need?
@jrh4642
2 жыл бұрын
I noticed I'm pretty late to the party but I'd like to recommend investing in a magnetic oil drain plug. Attracts the metal shavings to the plug. It's only a couple of bucks.
@Rythecarguy
2 жыл бұрын
Great tip!! 🤘🏻👍🏻
@nnylareed
8 жыл бұрын
Finally did the oil change and Carquest must bring a popular filter because that's the same filter that came off my Nissan also. I have a feeling the filter hasn't been changed in awhile though because of that...any thoughts?
@Rythecarguy
8 жыл бұрын
+NYLA not really, car quest is a really popular "affordable" brand ;) its likely that whoever did it last just used that brand. Car quest is still around in a lot of areas of the country.
@nnylareed
8 жыл бұрын
Great to know. Thank you Ry.
@hollymhood
8 жыл бұрын
thank you! :)
@Rythecarguy
8 жыл бұрын
+Hollyhoodg Anytime! Let me know if you want me to do anything else.
@adedamolaafonja7333
4 жыл бұрын
@@Rythecarguy do you still do videos? I just got an xterra, 2004.
@jmac-rz6zc
2 жыл бұрын
Ry, do you change the oil when the vehicle is hot or cold or does it matter?
@Rythecarguy
2 жыл бұрын
They say warming it up will help you drain more out when you change it. I usually change cold unless I am changing the type of oil I use.
@michaelcoleone9665
2 жыл бұрын
Light knocking noise on first start up after oil change for about 1-2 seconds, is that normal?
@Rythecarguy
2 жыл бұрын
Yea, it can make a little noise until the oil gets all over the place.
@nnylareed
8 жыл бұрын
Ry can you please do a video on how to recharge air conditioner?
@Rythecarguy
8 жыл бұрын
Unfortunately I cannot demonstrate that because my truck does not need it. It is not one of those things where you can do it when you don't need it. Sorry about that.
@nnylareed
8 жыл бұрын
Ok. Thank you for considering it.
@erikz74
Жыл бұрын
Can i use 10w30 instead of 5w30?
@Rythecarguy
Жыл бұрын
Yes, your manual should show you the best weight for the temps you're going to be driving in. I think they say 10 weight should be good for most the year.
@javakhyan
8 жыл бұрын
Hello my friend, please help me )) I have Nissan Xterra 2006 and mixed poured diesel (((( what should I do? Thank you
@Rythecarguy
8 жыл бұрын
+Ashot Javakhyan if you mean you put diesel into you gas tank then you've got a big problem on your hands. You need to siphon the diesel out of the tank and flush your fuel lines. You should be able to get a manual siphon from a hardware store or auto shop. There are few ways to get diesel out of a fuel line but the easiest way (not the safest) would be to disconnect the fuel line from the fuel rail, stick it into a container, then try to start the motor. that should force the fuel out. Be extra careful and good luck. You will have to research this and get more information. I have never experienced it before. All I know is you really need to get that out of there.
@jlee29170
5 жыл бұрын
What weight would you recommend for a high-mileage 2005 Frontier 4.0?
@elonsus9747
4 жыл бұрын
jlee29170 5W-30. How high is the mileage?
@mercury64
7 жыл бұрын
I have to say the skid plate really makes it a pain to get to the oil filter on these. I had to get a ratchet oil filter attachment to get mine out
@Rythecarguy
7 жыл бұрын
You can drop the entire skip plate too. I think its about 6-8 bolts. But its not really heavy once you have it free.
@khoesch8138
4 жыл бұрын
@@Rythecarguy Is it hard to take off and then put back off - Karen
@AssumedDarkness
7 жыл бұрын
I have a question I have a 2008 xterra with 106000 on it and after an oil change around 1500- 2000 miles the oil is low only has oil on the tip of the dip stick can't find any leaks what so ever and can't figure out where it's going
@Rythecarguy
7 жыл бұрын
+Stan Walters do you have an automatic? If so you need to do a coolant flush and make sure that you don't have oil in your coolant. If so you have a lot of work to do.
@AssumedDarkness
7 жыл бұрын
No sir its standard
@Rythecarguy
7 жыл бұрын
ok good. Well You should check your coolant anyway. You don't need to do a full flush but you should make sure oil is not getting in there. You could have a bad head gasket. Are you having any over heating issues?
@AssumedDarkness
7 жыл бұрын
No actually it would lose heat when you came to a stop but once you got going again it would come back so I checked the radiator and filled it was quite low as well
@Rythecarguy
7 жыл бұрын
Are you sure you don't have a leak? The liquid has to be going somewhere. Do you notice any smoke coming out of your exhaust when you drive?
@johns.8681
2 жыл бұрын
What size bolts hold the skid plate on. 10MM?
@Rythecarguy
2 жыл бұрын
Yep!
@johns.8681
2 жыл бұрын
@@Rythecarguy Thanks. I discovered a drip-free way to remove the oil filter if the car is cold. After loosening the filter, wrap a plastic bag around the filter, past the point that it mates to the engine. Hold the bag in that position, around the filter as you are loosening it. Remove it, inside the bag but with the open end, up. Pull the bag with the filter out the side (passenger side) opening of the skid plate. Wipe the mounting point, on the block with a paper towel. Clean removal. In the same way, I use a large plastic bag over the oil pan. After pouring the dirty oil out of the pan, just gather up the oily bag, ball it up and toss it in the garbage. The pan is completely clean with no mess to clean up...... (This only works if the oil isn't hot. Hot oil could possible melt the bag)
@heavyhitter886
6 жыл бұрын
Why can't we switch back and forth between conventional and synthetic?
@pczapp827
6 жыл бұрын
You can -- but why would you ? Use only Full Synthetic on everything, Cars,Trucks,Lawn Mower,Snow Blower. I have used only Full Syn for 30 years,since it was first avail.
@joelelbert1185
7 жыл бұрын
Sad but it's easier to remove the entire skid plate to get at oil filter. I've sliced my arm up good trying to get at it through filter door. Ridiculous design! Plus the drain trough is just a weee bit better than nothing. Oil still slops around. Not a fan of dip stick on xterra either. It goes in at such a tight angle it feels like you're scraping flakes of metal off going down the tube. Makes it hard to get a accurate oil level read. Another terrible design.
@elonsus9747
4 жыл бұрын
Joel Elbert Have you done the spark plugs? Removing the Intake is pita.
@waynebeck7801
2 жыл бұрын
The dipstick is the worst
@AlmightyyCres
3 жыл бұрын
I've always been putting 5 and 1 quarter I didnt know it was a little under 5 and a half omg lol
@jimmymolinaro7554
3 жыл бұрын
Wow, you're either one very brave or one very careless dude not using jackstands!
@Rythecarguy
3 жыл бұрын
Sometimes I do that just to feel alive.
@joeh4253
3 жыл бұрын
haha that’s funny. myself, i usually forget the jack stands because i’m either too worried about the daunting task that lay ahead or super anxious thinking about the numerous ways the “repair & replace” could go wrong. people wouldn’t believe all of the projects i’ve done right here outside at my apartment - 105 degree summers, 30 degree winters: nothing stands in between me and my transpo’
@johnwohlheter601
Жыл бұрын
I have to say this 16 minute video could be cut down to about 5 minutes. Ya got a lot of filler in there bro. That being said i ordered a nissan filter for my 2012 nissan (part# 15208-65f0e) and man does it seem like a tiny filter for a 4.0L engine. And it comes with this copper washer??? I assume its for the drain plug , but your drain plug didnt have one??? I will never understand why manufacturers put 1 time use washers on drain plugs. Old cars came with a metal drain plug and no stupid washer. Anyway I hope i got the right filter.
@johnwohlheter601
Жыл бұрын
yep just as i figured amazon recommended the wrong filter. the correct filter for a 05-15 xterra is a Nissan (15208-9E01A)
@Rythecarguy
Жыл бұрын
👍🏻
@jasonhunter974
4 жыл бұрын
*watches video of guy changing oil on Xterra* Oh yes, that f!cking access panel in the skid plate. I wonder if he takes it off, or slices up his wrist to get the filter off? *guy easily removes filter through tiny hole* ...you son of a bitch.
@Rythecarguy
4 жыл бұрын
😂🤣 for real though, I have for sure cut myself more than once on that stupid thing. Just got lucky this time.
@jasonhunter974
4 жыл бұрын
Ry the car guy I had an 06, years ago now, and I just took the skid plate off. After figuring out that little access hole wasn’t designed for my fat American wrist, I gave up trying.
@genericdude6551
3 жыл бұрын
Oil filter location - another poor design, If it;s on real tight it'll be a hassle to get it off.
@Rythecarguy
2 жыл бұрын
Agreed
@radioman321
4 жыл бұрын
I get all this and I’m sure these videos are helpful to many, but if you need this much hand holding, please don’t do anything to your car yourself.
@Rythecarguy
4 жыл бұрын
We all need to start somewhere friend. What’s a better place to start than simple regular maintenance?
@user-sd6ck8vy1h
2 жыл бұрын
Spend 5 bucks on a body worn microphone please
@Rythecarguy
2 жыл бұрын
This video is six years old.... I now wear $300 wireless lav. Thanks for the professional advice.
Пікірлер: 144