Excellent video! What brand of front stand are you using? Thanks
@Virtualmix
Жыл бұрын
Excellent video. This is how the pros do it!
@josepgarciahidalgo9477
Жыл бұрын
Really good video!
@ridingdigital
Жыл бұрын
Nice video, thanks 👍
@dynaordie8083
Жыл бұрын
Great video. Thx
@stojkey
9 ай бұрын
Do you remember the pin size you have for the front stand??
@jerryx2000
10 ай бұрын
how long do you own this bike & is it reliable?
@ernestocolato
Жыл бұрын
What stand is that for the from bro? I have the same bike and been looking for a front stand
@patrickobrien4880
7 ай бұрын
You have a classic oil leak at the wiring harness.
@kmattar
2 жыл бұрын
Nice. Not sure how to check oil after. How many liters? I’ll check the manual 😉
@Virtualmix
Жыл бұрын
The engine takes 3.2L for an oil change or 3.4L including a filter change. Use the glass window on the right side of the engine as shown at 2:34 to check the oil level. Add the oil slowly to not overfill.
@johndillon5290
2 жыл бұрын
That's a good idea to fill the replacement filter with oil. What setting are you torquing the sump bolt to?
@Ryansanders80
2 жыл бұрын
Always good to lube your filters, a good rule of thumb for drain bolts is snug with a 1/4 inch ratchet. You only want hand tight. The Book says 25newtonmeters but more than one person has been on the forum with stripped threads..
@Virtualmix
Жыл бұрын
@@Ryansanders80 I suspect the main cause of stripping threads are due to people incorrectly setting their torque wrench in lb-ft instead of Nm. If you enter 25 lb-ft you end up with 34 Nm and a stripped thread.
@Ryansanders80
Жыл бұрын
@@Virtualmix also click style torque wrenches have a minimum and maximum accurate range and need to be calibrated on occasion. Often over time it will loose accuracy for low torque applications
@johnpeters9793
Ай бұрын
2 years late....but filling the filter is as controversial as Ford vs. Chevy. I do fill the filter when I can....but try NOT to fill the center section to prevent unfiltered oil entering the motor..
@gabephelan6338
2 жыл бұрын
Very dope. What exhaust system? headers? Decat?
@lemonheadgarage
2 жыл бұрын
thanks! The bike has the Iron Cobras 2-1 exhaust. Its pretty much straight, decatted.
@justinderrick8708
9 ай бұрын
You didn't use Castrol
@stephencarbajal5657
Жыл бұрын
That has to be the easiest oil change on any bike. Change my mind
@lemonheadgarage
Жыл бұрын
Haha! For sure one of the easiest!
@MKlukowski
3 ай бұрын
On certain harleys you dont even to change, just keep adding 😅
@stephencarbajal5657
3 ай бұрын
@@MKlukowski 🤣🤣🤣
@hurricane5677
Жыл бұрын
Hey bro, is there any chance I could get a hold of you over instagram or something ? I would have a question about your CBR, I own the exact same bike, in blue/silver color combo.
Пікірлер: 25