How to change the seal and the size of the front shock oil for a Honda Supra Fit, Grand, Legend, Fitnew and the like. The step we have to do is open the locking bolt a little first under the tube using an L6 key, then open the locking ring above the shock axis by pressing using a screwdriver and pry tool. Then turn the locking bolt from the bottom until the two tubes are released.
Then open the shock cover, locking ring above the shock seal, and also open the shock seal. Then attach the front shock seal with the nock writing positioned above then press it to enter the front shock tube.
For the size of the shock oil, input 60 ML less than the standard to make it softer. And if it's too hard, it can be removed via the L 6 bolt from the bottom tube. Then put the shock oil into the shock tube and attach the tight spring below and attach the loose one above.
Thank you very much to all #SUBSCRIBER# and viewers, hopefully the knowledge is useful.
Please #SUBSCRIBE AND LIKE#
If you have questions, you can write them in the comments.
Tel/WA: 085863491419.
Thank you very much.
Негізгі бет HOW TO CHANGE THE SEAL AND FRONT SHOCK OIL SIZE FOR HONDA SUPRA FIT, GRAND, LEGEND, FITNEW MOTORCYCl
No video
Пікірлер: 146