hands down, best video ive seen on this replacement! thank you!!
@aldee3018
5 жыл бұрын
would this be the same way to change out the solenoid block on my jeep commander with the 5.7 hemi?
@trainer2018
4 жыл бұрын
What is the resistance of the solenoids? I can't find it in service information.
@seanalexander861
5 жыл бұрын
Question for you Troy? My drivers side CV Axle had to be replaced due to torn open boot on recent trip. 2 days later truck went into 4th gear limp mode , 4WD would not engage either . Scanned for codes and it identified P0750. Dealer replaced Solenoid and all ran well. The dealer said that if my CV Boot didn’t tear open, the transmission solenoid likely would not of needed replacing. They basically said the CV Axle problem is what further caused damage to solenoid. Would you say the same thing or are they unrelated ? Thanks for the help
@WeekendPursuitOutdoors
5 жыл бұрын
I feel I can do this in my garage at home. Do I have to hook up to computer afterwards?
@rmag7760
3 жыл бұрын
What was that test that you did?? What wires did you have the probes hang on to?? Thank you
@BerryMcCaulkiner859
4 жыл бұрын
What pins do we check?
@randomjefferson6140
3 жыл бұрын
I have a dodge nitro and my car won't shift to the second gear it's reading the shift solenoid A code P0750 do I need to change the valve body or just the solenoid pack. Or something else plz help
@gilhernandez605
5 жыл бұрын
Where can I get the solenoid?
@dvd791
Жыл бұрын
Can it be done without quicklearn?
@Dexter_Solid
6 жыл бұрын
FCA just sent me a letter in the mail to have this done to my truck, its gonna be free but i dont like the idea of opening a perfectly working transmission, just wondering if it worth it.
@trevorellis1342
3 жыл бұрын
You saved my ass thank you
@ademgun2329
3 жыл бұрын
😂😂😂
@fanboy59
4 жыл бұрын
I did this but now its showing as my gears are in reverse even though on the linkage its in park is there a way i can fix this
@bryanbivens8624
4 жыл бұрын
Could be 2 things, adjust linkage cable or take valve body back off and make sure linkage pawl is lined up with valve body correctly
@reneorta9049
4 жыл бұрын
Could you tell me which pin numbers are the ones you are using to test?
@BerryMcCaulkiner859
4 жыл бұрын
Find out what pins?
@b7dope
4 жыл бұрын
He won’t tell you. He scared to lose his job duh
@gabrielsalazar6648
9 ай бұрын
Do you know why I’m getting a pO871 code . When I check engine light, turns on my transmission won’t shift over second gear. If I let the truck sit for a minute and turn it back on it will drive normally what can it be
@barrymontgomery5749
5 ай бұрын
You ever find out why it’s doing that? Mines doing the same
@gabrielsalazar6648
5 ай бұрын
@@barrymontgomery5749 solenoid pack
@gabrielsalazar6648
5 ай бұрын
@@barrymontgomery5749 solenoid pack
@ianlee4089
6 жыл бұрын
Can you please help me I just replace the solenoid pack and now the engine will not start or even turn over. I have a 2009 Dodge Ram 1500 5.7 hemi what did I do wrong?
@troystransmissions8413
6 жыл бұрын
give us a call
@edwardbeaudry9432
4 жыл бұрын
Same thing happened to me! What was the problem?
@JoyLynskey
4 жыл бұрын
Did you find out what the issue was?
@cristello38ct
3 жыл бұрын
@@troystransmissions8413 how is the part
@Bone4883
5 жыл бұрын
My ram was stuck in 4th and I had a solenoid code come up when I checked it. How much do you think repairs will cost me ? For the solenoid/labor/ and to refill tranny with fluid again ?? Please reply
@Bone4883
5 жыл бұрын
It was a easy fix. Nothing major
@coleture3
5 жыл бұрын
did you get it fixed my truck is doing the same thing? but I get a different code
@Bone4883
5 жыл бұрын
Elite 3 yeah i got it fixed for $650.
@ademgun2329
3 жыл бұрын
Music name please ?
@trustmebro8500
8 ай бұрын
@ademgun2329 the song is WAP by cardi B
@kurtw356
5 жыл бұрын
I'd rather push a Dodge than drive a Ford
@alamosabill201
6 жыл бұрын
Bet that wasn’t a cheap fix. 😬
@stacytuttle9332
2 ай бұрын
Virtually click bait. No explanation. Missing multiple steps. Almost useless unless your just bored.
@jmmck2361
3 жыл бұрын
So is there going to be any verbal explanation as to what you’re doing?? Waste of time watching this. And get rid of the music!
@ridetimeguy3060
Жыл бұрын
He changed the shift solenoid as it was likely not shifting out of second causing a code. He was probably checking the resistance between pins
Пікірлер: 40