In this video, we show you how to change the spark plug and set the gap on a McCulloch Mac Cat 338 Chainsaw. Click here for a full list of parts, tools & transcript!
Parts:
RCJ7Y Spark Plug - bit.ly/3nvn09z
Feeler Gauge - bit.ly/2WuSMaM
Web: www.lsengineers.co.uk/
Facebook: / lsengineers
Twitter: / ls_engineers
Instagram: / lsengineers
Blog: www.lsengineers.co.uk/blog.html
Health & Safety Warning Please ensure that you have safely prepared the machine and work space. If you are unsure about any aspect of the task please seek professional advice.
Transcript
Today we're going to replace the spark plug on a McCulloch Mac 338 Chainsaw.
Firstly remove the top cover using a flat screwdriver and remove the 3 screws.
You can now disconnect the spark plug boot.
Loosen the spark plug using a torx.
Get your new spark plug and if necessary, check the gap before you change it.
Using a feeler gauge, make sure the gap is 0.7mm.
Hand tighten the plug, and tighten with the torx.
Place the boot back over the plug.
Then attach the top cover, fixing with the screws.
That's how you replace the spark plug on a McCulloch Mac 338 Chainsaw.
If you have any issues, questions or would like to talk to our customer service team please visit our website. Please note L&S is a UK based trading company, please see our website for information on delivery to other countries.
Негізгі бет Тәжірибелік нұсқаулар және стиль How to Change the Spark Plug & Set the Gap on a Mcculloch Mac Cat 338 Chainsaw | L&S Engineers
Пікірлер