Tip. Seat the new seal first for the sump filter. Don't push it in with the filter. Many DIYs have cracked the filter and/or seated the seal on an angle. You can use a socket that is the same circumference as the seal. Thanks for the vid.
@RustyHaloMetalDetecting
2 жыл бұрын
Exactly what I was thinking!
@mjlrestorationshop.2405
5 жыл бұрын
Hey .. just wanted to thank you for taking the time to educate us. Great video, and now I feel much more confident about my job on this end.👍👍
@docfaust4532
5 жыл бұрын
Damn nice work. I thought I would know how to do this after working on cars for 50 years, but I would likely have overtightened the gasket. Plus could have missed and left the filter seal up in there. Kudos for an excellent video.
@thomasbriansavingmoney
5 жыл бұрын
thanks for watching.
@rileysowner
3 жыл бұрын
That filter seal is an issue with every transmission sump filter I have done on either GM or Dodge. At least with the Dodge it isn't way up inside the opening like it was with my 1997 GMC Safari van.
@OVI-Wan-Kenobi-8
2 жыл бұрын
This video is even better than the 1A Auto video on the same subject.
@curtishouze1471
4 жыл бұрын
This was a very informative video, especially on the correct way to tighten the screws.
@justinhughes9722
Жыл бұрын
Thanks for actually explaining to people the important little things people need. I just watched it for a refresher and now I will be a subscriber. Nice.....
@marshallricketson130
Жыл бұрын
Very helpful. Watched it a couple times while i was changing the filters. Made everything very easy. 👍🏻👍🏻
@brentgaugis2211
Ай бұрын
very good video. easy to understand. thank you from New Orleans. pot whole city.
@andrewmcconnell440
Ай бұрын
Best breakdown I’ve seen !
@bogus360
5 жыл бұрын
Great video!! Very helpful and to the point. I enjoyed the "I think you get this" on many small things that others draw out ad nauseam. Thanks.
@thomasbriansavingmoney
5 жыл бұрын
thanks for watching!
@juniorbaez732
5 жыл бұрын
Excellent my Friend . I wasn’t buying the whole silicone gasket type deal . Great way of showing how to get the gasket on there easier !!
@milehigh3054
5 жыл бұрын
I changed my tans fuild filters on my tilled driveway.. bought 6 quarts of fuild not even on the dip stick yet. Must of drained some of the torque converter in the process. This vid did help me.. that metal filter retainer thingy was a bit tricky to get the new one in. But overall everything went well. No leaks yet. Lol
@dodge33445
Жыл бұрын
Just a tip to people that may have a harder time getting the gasket to hold in place.... a light coat of Vaseline on the actual trans pan along the edges where the bolts go....Then sticking the gasket onto the Vaseline... will allow the gasket to stay in place as you put it up. I know some kits have gaskets that dont allow the bolts to stay in place. So this truly helps. IT is also 100% SAFE, and is even noted in my service manual for my BMW to be used for transmission gasket, and holding it into place before bolting it back up. They also use Vaseline in transmission assembly to lubricate sensitive parts.
@williamblair268
4 жыл бұрын
awesome knowledge on the gasket....bout to start my 2007 Grand Ch...Gonna add a pan with a drain..
@franciscobarajas2378
6 жыл бұрын
Thomas Brian Thanks, you are a professional, great video
@thomasbriansavingmoney
6 жыл бұрын
thanks, and thanks for watching.
@jimmcgettigan1326
5 жыл бұрын
Nice instructional video. AAMCO transmissions swore up and down that my 2008 Ram only had one transmission fluid filter although I went out and bought the exact same kit that you did which has both the pan filter and the internal transmission filter with gasket. I’ll probably end up doing it myself although it can be messy.
@thomasbriansavingmoney
5 жыл бұрын
messy yes, saving money, kinda worth the mess. ha. perfect, thanks for watching. aamco employees scare the heck out of me !!!! ha
@milehigh3054
5 жыл бұрын
Very messy.. I used a large tray from a oversized pet kennel with a drain pan on top.. worked great! How much would this job cost. At the dealer and or grease monkey?
@matty2x302
5 жыл бұрын
Thanks, have to do my 05 Ram 1500 tomorrow, this will help out lots 👍
@isaaclaumbach2522
5 жыл бұрын
I have the same 2005 Dodge Ram 1500, let me know how it goes bud
@matty2x302
5 жыл бұрын
Seti Globe Working on it now, one of the front bolt/screw heads is rounded out, they all seemed over torqued to me, and looks like black RTV on it too ???? Anyway if & when I get out bolt I’ll let ya know , I’m an aircraft sheet metal mechanic so I’ll get it right , WELL PRAYING I DO 👍
@matty2x302
5 жыл бұрын
Seti Globe Never did get out bolt , 1 out of 15 was seized & rounded off, pan lip & side wont let any vise grips or pliers in there, just ordered a set of Irwin-Hansen bolt extractors (left handed twist sockets) from Amazon and will be here Tuesday, might not be till next weekend until I tackle it again, will let ya know though. ONE LITTLE FREAKING BOLT 😡😡😡
@matty2x302
5 жыл бұрын
Seti Globe P.S the bolt threads are tapped into transmission body that’s why I didn’t drill head off bolt/easy out & go that route , broken off easy out ain’t no joke
@isaaclaumbach2522
5 жыл бұрын
@@matty2x302 oh man what a bummer, everything is on hold for 1 bolt ugh that's how it goes sometimes
@rmag7760
3 жыл бұрын
Great video!! Very informative and relatable
@blackwolf1780
Жыл бұрын
Great video👏🏽👏🏽🔥❤️ Well informed and everything
@PTucker0864
Жыл бұрын
Mine has 180,000....I bought the truck with 24,000....I'm 150,000 overdue but still going strong!
@604axeman
6 жыл бұрын
Excellent video! Thank you. Very thorough
@thomasbriansavingmoney
5 жыл бұрын
thanks for watching!
@carlosisanchez3471
5 жыл бұрын
Brooo great video I'm going to do my own oil change thanks
@dozervin1
5 жыл бұрын
Getting ready to do mine . Thanks for the great video.
@thomasbriansavingmoney
5 жыл бұрын
perfect,,, thanks for watching.
@phillipfritz7014
2 жыл бұрын
Excellent instructions thanks
@BrandonP-ko8kj
7 ай бұрын
Wow excellent video.
@jaycastillo1187
2 жыл бұрын
Will this help a transmission slip from 2nd gear I have to turn off the engine and restart it when it slips to 2nd than im good after starting back up
@popmurphy9859
2 жыл бұрын
Did you have to remove other part's like cross member etc. before transmission was removed? Only have 99000.mi. on my 2005 1500 4x4 hemi fluid is not discolored!! Would do it myself if i don't have remove other parts. Thanks for the video very easy to follow so i just subscribed .
@robertcastaldo5038
5 жыл бұрын
Great video thank you from the state of pa
@brym3452
2 жыл бұрын
Can you do a shifting solenoid replacement. Thx.
@anushkathibbotuwawa1986
6 жыл бұрын
Good work
@trungnguyen-lv3bq
4 жыл бұрын
how many miles should i do my fluid and filters/ also the links for the parts does not include the gasket, thanks.
@showertimerworld476
4 жыл бұрын
Nice video, i got the same truck. I am living in Belgium and i am little bit lost to find right level fluid. Can u tell me how to check the fluid? My english is not effective and i dont understand how to check it. Thanks man. Do i need to run the truck several miles to get normal temperature? I have even checked with a infrared thermometer but dont find how to calibrate it according the temperature fluid. It got the 5.7 liters Ram 1500. Your help will be very appreciated...
@jeffa847
3 жыл бұрын
@thomas brian . In another video they have a new drain pan from 1A Auto you can buy that has a drain plug in it to make it easier to change the next time. Have you ever seen that drain pan or one like it to be able to judge the quality? Thanks for the video
@rileysowner
3 жыл бұрын
I just put one on from Amazon. Seemed solid. I will see how it holds up to the road salt this winter.
@lowliability
4 жыл бұрын
Good video. I think you understand that.
@ego362
Жыл бұрын
perfect video
@therockjab
5 жыл бұрын
Nice ! I have an 06 4wd. Is this the same genn
@alvaromaldonado405
4 жыл бұрын
How much fluid require the RAM 1500 2012 SPORT? 5.7 hemi
@patrioticoath1376
3 жыл бұрын
What about all the fluid in the lines, torque converter and cooler?
@rileysowner
3 жыл бұрын
In my research, most people say don't do a total fluid flush, just the fluid that comes out when you replace the filter.
@jc49fishniner4lif7
5 жыл бұрын
Awesome thanks so much for sharing 👍
@reupapo
5 жыл бұрын
I think I understand that! I get it! Thank you.
@thomasbriansavingmoney
5 жыл бұрын
thanks for watching!
@johnmccloud1831
5 жыл бұрын
If filters are clogged will you get a whirring noise going down the road when pressing accelerator?
@williamsproductreviews7502
2 ай бұрын
Yup
@thecosmickat3954
5 жыл бұрын
Do you add trans fluid when trucks off then start it or while its on pour it in?
@danielaraujo44
5 жыл бұрын
loren parks when its off you should add at least 4 quarts and top it off with the truck on
@danstreazy8026
5 жыл бұрын
That RTV is from the factory, mine was black.
@tyle1720
6 жыл бұрын
thanks for this video
@thomasbriansavingmoney
6 жыл бұрын
thanks for watching Tyler !
@jsnmart97
6 жыл бұрын
I have an 04 2500 automatic from a dead stop the truck doesn’t want to take off we push on the gas and it just revs up and moves forward slowly if I shift the truck in the first on the column and then hit the gas the truck will take off but from a dead stop it will not move very much almost like first gear is going out this just happened the other day and I haven’t dug into it much would changing the oil and oil filter is on the transmission maybe help this problem
@thomasbriansavingmoney
6 жыл бұрын
what about reverse ? 1 st and reverse work on the same clutch. so if reverse is ok then yes change the fluid and filter, and prob gonna need a shifting solenoid. thanks for watching.
@bogus360
5 жыл бұрын
Check for codes. I have an 07 1500 Hemi 4x4 that just started doing this also, and I got a P0750 (Trans Solenoid "A" malfunction) code thrown (WITHOUT a check engine light). The trans goes in to "limp mode" when this happens, and "D" keeps it in 4th gear only. If you shift to "1", you should be able to start from a dead stop easier. With that said, here's my dilemma. When I cleared the code, the issue cleared also!! BUT... It comes back after traveling at highway speeds for awhile. (No, around town driving does not repeat) I have felt a hard down-shift when coming to the first stop after exiting the highway, and the limp mode has returned. Even more bizarre... I can shut off the truck, come back 5 minutes later, start the damn thing and the issue is gone!! I REALLY despise intermittent failures!! I'm here because my local Dodge "Service" guy said a trans fluid change will fix this... for a mere $285.95. I'm skeptical... While I have thought fluid temp/breakdown may be applicable, the fluid looks/feels good on the dipstick. Anyone have any more knowledge?... Or black magic to rid this demon from my trans on Halloween? Hahaha... Thanks.
@elderfarms
5 жыл бұрын
bogus360 replace shift solenoid
@masmcg
6 жыл бұрын
Mine is an 04 2wd. Will it be the same?
@thomasbriansavingmoney
6 жыл бұрын
yeppers, thanks for watching.
@solematrix
5 жыл бұрын
What transmission is tis a 45rfe?
@thomasbriansavingmoney
5 жыл бұрын
i believe it was. thanks for watching.
@1smokeyj350
5 жыл бұрын
Awesome
@nonagreeable
6 жыл бұрын
Is this a 4x4 trans? If so what is the model? 46re?
@thomasbriansavingmoney
6 жыл бұрын
i believe it was, thanks for watching.
@thomasbriansavingmoney
6 жыл бұрын
yes it was. thanks for watching.
@staywoke9172
6 жыл бұрын
I got me a 2006 ram1500 4x4 5.7l. Does anyone knows if a 2005 Ram 1500 4x4 5.7 transmission fit on it?? I see the engine and everything is the same. It I’m just not 100 percent sure if the 2006 has a different trans
@thomasbriansavingmoney
6 жыл бұрын
as long as the trans model are the same, you will be ok with those two years. always pull the pan when buying a used trans, look for metal etc. and when buying a used tranny, if the fluid is beautiful , be cautious if its a used tranny and someone is trying to pull one over on you, they will change the fluid. used trans should have used fluid. you get it. tanks for watching.
@thomasbriansavingmoney
6 жыл бұрын
check the teeth tone, if they are the same, you will prob be ok. thanks for watching.
@darkknightgaming70
4 жыл бұрын
Should be torqued to 125 inch lbs
@Gary_in_NoVA
3 жыл бұрын
No. 105 in/lbs
@snr2snt190
3 жыл бұрын
One of the most informative videos, clear spoken and helpful I've ever seen. Thank you so much
@mack606
Жыл бұрын
I did my 2008 ram for the 1st time the only damn thing I hated and I do mean the only damn thing was scraping that rtv off never understood the reason for using that crap I went with the gasket cleaned it put some silicone grease along the edges to keep the gasket in place and boom pan in it’s that simple
@franciscobarajas2378
4 жыл бұрын
thanks Thomas for this exellent video, you are a professional.
@andrewelder6864
4 жыл бұрын
Thank you. Great video. Been awhile since I've done one of these and, after watching video, I remember that I've over tightened them in past and would have done it again. You've saved me time and money. You rock!
@ismalovessguns8769
11 ай бұрын
Thanks a lot man👍🏼
@airmike1271
2 жыл бұрын
Thank you! Great video. I just bought a 2003 Ram 4x4 as a project and for towing a boat. It has 194k miles so I am servicing everything that has liquid. Because I am picky, I am going to redo the transmission, rear diff and engine with fresh fluids for a second time after about a month.
@Redneck_Engineer
4 жыл бұрын
This was helpful to watch before hand. Only thing different is the pump filter seal. Drive that into the pump body first, then install the filter. It's easier that way and the manual calls for it to be done that way. Also torque spec on the pan bolts is 105 in-lbs.
@Habel420atgml
4 жыл бұрын
GREAT VIDEO!!!!!! Anyone with questions or concerns should definitely watch this video! All my questions were answered and not once did he use the word "UUHHMMM", that's confidence!! Once again GREAT VIDEO and THANK YOU you for making my experience easier, and i learned allot from you just now.
@soslimyohyea6874
5 жыл бұрын
Thank u so much was so helpful
@michaelbezos2969
Жыл бұрын
Great video, most appreciated. I am thinking based on filters from Mopar, seat for paper filter needs to be placed up and in valve body, & due to plastic threads on spin on filter, 3/4 turn more once filter makes contact with valve body. I am not trying to spout off, just what Mopar filters indicate. Again thank you very much. Definately will subscribe! You know your stuff! 😊
@jwills8606
5 жыл бұрын
Really good. Clearly a pro, whether you make your living as a mechanic or not.
@trents.b6903
3 ай бұрын
Every video on transmissions doesn't show adding fluid. Another waste.
@jimmcgettigan1326
5 жыл бұрын
Good info and technique!
@donatopinto1351
Жыл бұрын
How you drain all the fluid is in the radiator??? I mean drain all the system...
@EpicStudz
3 жыл бұрын
This has been the best instructional video for transmission fluid change yet!
@lenhouser5550
2 жыл бұрын
Very good tutorial. Succinct. Not wasting your words and my time.
@bigfan1364
5 жыл бұрын
Excellent tutorial man, great job. Thanks👍👍👍
@popmurphy9859
2 жыл бұрын
Meant transmission pan old age creeping up on me lol
@hatchboy1
5 жыл бұрын
What will cause my transmission to shift up and down while driving and when I slow down it jerks to gear down ! It’s an 05 Dodge Ram 1500
@israel2035
5 жыл бұрын
I had the same problems on mine
@FMJAYYY21
5 жыл бұрын
Clean your idle air control valve or replace it . I had the same issues and cleaned it and worked great thought it was a bad tranny but wasn’t
@Michael-B41
Ай бұрын
best video on youtube well done. 6 years old. i just bought an 05 doing research on it see what fluids are etc of course i new atf+4 pretty common on dodge
@Michael-B41
Ай бұрын
however it took closer to 6 quarts on my 05
@2004DodgeRam
9 ай бұрын
does it not need to be flushed?
@RustyHaloMetalDetecting
2 жыл бұрын
Clear, helpful, informative, nice! Great job, thank you sir!
@redbloodedhardworkingameri6958
2 жыл бұрын
great video
@rosaliohernandez4219
Жыл бұрын
Good job sir
@strongreg1
Жыл бұрын
Trying to fix/repair/maintain my own 05 Dodge 1500 work truck and this was very informative and very well done. Clear, strait forward and just the right amount of detail to get it right. Thanks for your efforts putting this vid together. I am now subscribed
@rileysowner
3 жыл бұрын
The silicon gasket maker is what this came with from the factory. :-( I don't understand Chrysler's seemingly defaulting to this from factory, especially for the transmission pan. I don't even like it for differential covers, much less something with lots of small valves in it. Thanks for an excellent video. As others have said, drive the sealing ring in first, then mount the sump.
@briangil2163
4 жыл бұрын
Excellent video angles of pan gasket and pick-up tube gasket. Very helpful. Best I've seen on youtube. I've never made a video, and my instinct would be to "put down this dumb camera and just get the job done", so thank you for your attention to detail and patience. I have a 17 Ram I'm going to do when the weather breaks, so thank you again.
@j.v.1166
2 жыл бұрын
Of the two dots on the dipstick, where should the fluid level be sir? Mine is way below the bottom dot and I think I may be really low but I don't want to mess it up or overfill it.do you recommend Pennzoil for a 2005 dodge ram or will any ATF do?
@harryvega9491
2 жыл бұрын
Very informative and clear! Question, I have a 2005 with the hemi engine, with 115,000 miles and probably never had this done, im still on time to do it ir just leave like that? Thanks
@romanstar7550
3 жыл бұрын
dude ive watched 15 vids on this and you owned all , great vid presented quickly , clearly , logically . and contains some excellent tips nobody else was on ! now i see why youve 60K fans ...
@yooperland1
4 жыл бұрын
Great job on the video, thanks for taking the time to share and thanks for the great tips!!!
@sometimesnotu7938
4 жыл бұрын
Lmfao. The only way to tighten the bolts properly. Is with a torque wrench and proper sequence pattern of tightning people.
@alergl9842
2 жыл бұрын
I’ve seen people push in the seal with a socket tapping with a hammer did you do that or just push it in with your hands ?
@markmartin3152
2 жыл бұрын
One of the best videos I’ve seen on the Dodge ram transmission thank you thank you very much
@wkdemt6556
3 жыл бұрын
Great Video, just a curious question, was there ever a magnet in the pan? I did not see one after you dropped the pan.
@amandaburleson2035
2 жыл бұрын
you really know how to teach through a camera, good job... its almost as if i did it myself.
@TbuckeT81
4 жыл бұрын
I did this exactly and now my 06 won't even go into any gear. Help. Please.
@sonboogie
4 жыл бұрын
Well done. Thx for sharing. 👍🏽
@Notbluujeans
Жыл бұрын
Question sir. Like checking the fluid in neutral, should this be done with my truck in neutral as well?
@thomasbriansavingmoney
Жыл бұрын
changing doesn't matter, when you check the level it may. it should be on the dipstick which gear to check it in. read along side the dipstick, it will be stamped very small
@Notbluujeans
Жыл бұрын
One other question thanks for your video. Got my fluid and filters changed. I put the magnet in the dead center of the Pan instead of the corner. Is that okay 😬
@Notbluujeans
Жыл бұрын
I feel as though it might be right under that middle part of the filter and I’m afraid it might get sucked up into the filter Am I paranoid over nothing
@danhambrick6331
5 жыл бұрын
So you only changed about 1/3 of your trans. fluid...
@kayeyeager8006
4 жыл бұрын
So happy I found your video. I am ready to do my 99 dodge now. Thank you!!!
@harrypersaud9422
3 жыл бұрын
Great video sir very simple and informative.
@bw7925
3 жыл бұрын
every other video I watched uses RTV
@salvatorecabano5482
4 жыл бұрын
This is a wonderful video I am going to try this on my Dodge Durango to 2005 hemi Would this be the same transmission I know mine takes the to filter as well also what did you clean the block of the transmission with without scoring the aluminum or getting little particles in this valve body
@tyrellsmith1221
3 жыл бұрын
If anyone knows the answer to this question would be great !
@wenull3
5 жыл бұрын
My 2006 Jeep Commander with the 5.7 Hemi from the factory uses RTV I got a filter kit from the dealer and asked for the gasket also they there is no gasket and put a thing of RTV in the box. :(
@thomasbriansavingmoney
5 жыл бұрын
it'll work. thanks for watching!
@framirez6038
5 жыл бұрын
thomas i just changed the shift solenoid on my 2008 dodge ram 1500 but it does not go into drive it clicks in but once you give it gas it wont move
@framirez6038
5 жыл бұрын
any advice?
@abowen2
6 жыл бұрын
Great video, but, I have a question. I have a 2003 Ram 2500 4x4 Hemi pickup and I'm trying to find a video that covers changing the transmission fluid/filter(s) in it but as close as I can find is yours. Can you tell me if the set up in mine is the same as your video? Thanks
@thomasbriansavingmoney
6 жыл бұрын
should be exactly the same. thanks for watching.
@skkfor
6 жыл бұрын
Many thanks for taking the time to make and post the vid. Nicely done; clear, informative and exactly what I was looking for. I'll be doing my Ram this weekend, and your directions are a HUGE help and greatly appreciated.
Пікірлер: 192