Thanks so much for watching. I truly help this is helpful information for you. For more information on how to take care of a Freshwater Salt Hot Tub check out this video... kzitem.info/news/bejne/oouYsKinbGmXaGk
@CreativeEnergySanRafael
2 жыл бұрын
One of my customers recommended I check out your videos, you have some great content! -Wesley
@TheHotTubLady
2 жыл бұрын
Aww thank you. Just trying to get the right info out there. Thanks for watching.
@crnatn
Жыл бұрын
The salt test strip instructions say DO NOT SHAKE OF EXCESS WATER. I liked your video, thanks
@TheHotTubLady
Жыл бұрын
Thanks for you observation
@milothechihuahuabrunetandmommy
2 жыл бұрын
Thank you for sharing have a beautiful day God bless you always
@TheHotTubLady
2 жыл бұрын
Thank you so much
@MJ3052
3 жыл бұрын
You look fantastic!! Loved all of the information!
@TheHotTubLady
3 жыл бұрын
Thank you so much!!
@pamperedpools651
27 күн бұрын
Hi I was wondering if you have any tips on the thermostats for the hot spring tubs I have a hot tub that's reading 50° I have electronic thermometer 89 ° for the water so obviously it seems like the thermostat has went out I just can't find much information online about the Hot Springs hot tubs thank you hope to hear from you soon
@budbaughman6233
Жыл бұрын
Thank you for the encouraging video. I didn't know about this, but the place where we purchased the spa told me this was available when I needed to replace my cell. Saved $320! I'm thankful that they didn't just sell me the OEM cell. Do you still use about the same function level as you did before you replaced? I keep ours on about 6, and I'll be curious to see if it needs to be adjusted when I install this.
@TheHotTubLady
Жыл бұрын
I am very confused what exactly did you change?
@sarahboren-rao3813
2 жыл бұрын
Thanks for the clear video! My salt cartridge routinely last only about 2 - 3 months. Is there something I can do to extend their life? They're expensive to replace!!
@TheHotTubLady
2 жыл бұрын
I did get a tip this week of soaking them once a month before they go bad in 2 tbs of ph decreaser in about 1.5 cups of water. Hardness of your hot tub water plays a huge factor in the life of the cell as well.
@MacFizzer
2 жыл бұрын
How long do you soak the salt cell in the PH Decreaser?
@markbair1269
3 жыл бұрын
thank you great info once again
@TheHotTubLady
3 жыл бұрын
I so appreciate the support
@markbair1269
3 жыл бұрын
@@TheHotTubLady great then i need some big help on a discount for the icare system lol
@TheHotTubLady
3 жыл бұрын
@@markbair1269 HOTTUBLADY10 SAVES you big 💵. 😂
@Disciplineofjiujitsu
9 ай бұрын
Throughout the 11months I have had this tub I have added water multiple times. Does this mean I still should drain it? It has been working so well, as well as my salt cell has been in 3-4 past it’s change months creating plenty of chlorine, purple. Finally started to taper off set at level 3. Going to change now, but want to see if I can get away with not changing the water as a good bit of the water isn’t 1 year old yet.
@TheHotTubLady
9 ай бұрын
I would go until the cartridge gives out unless you live in a climate that you can’t change in the winter. If you do change it now
@kleitzw
2 жыл бұрын
Great video one of the best out there. I continuously have low chlorine levels even when all my other measurements are in range I've been adding chlorine concentrate and barely get it up to where it should be. should I running the boost cycle instead?
@TheHotTubLady
2 жыл бұрын
Great! I am glad you found it helpful. Typically in cases like this, I have found that you are behind on free chlorine, and you need to get to breakpoint chlorine and you may have to do it twice. But you need to get to 10ppm of free chlorine and hold it for about 2 hours, once you get there make sure that you get to 1ppm of free chlorine for about 3 days then the salt system should take off for you. This video isn't exactly what needs to happen, but it will give you a good idea of how to actually get to breakpoint chlorine.kzitem.info/news/bejne/zYuJu6KDnnuon3Y Thanks for watching I appreciate the support.
@kleitzw
2 жыл бұрын
@@TheHotTubLady thanks ill try that and I'll turn my salt level from 3, up to 6. I have another question. I love my salt Jetsetter system but I've always thought that a salt system would be less expensive to operate than a chlorine system but it seems like with the cost of the salt cartridge every four months the salt seems to be MORE expensive, what's you're thoughts?
@MrCuzziebronz
Жыл бұрын
@@kleitzw It IS way more expensive, just a way for them to lock you into buying an expensive cell. I ditched my cell system and installed an Ozone unit. This lasts essentially forever and I just need to add a small bit of chlorine once in a while to stay on top pf it. Costs me around $40 per year
@geoffreyliss6817
Жыл бұрын
Can I add magnesium or epsom salts? Can I use fresh water and ignore the green light? Obviously two separate questions.
@TheHotTubLady
Жыл бұрын
No you need to use non iodized salt …. The green light is more of a warning. And wants to draw your attention to the salt. It does have other warnings other then salt so I would always ask yourself why it is blinking.
@markodom3791
4 ай бұрын
What are the cabinet and tub color you have?
@TheHotTubLady
3 ай бұрын
Platinum Shale
@adrianej4785
4 ай бұрын
Is there a way to reuse that cell and not change it every 4 months, the price is high.
@TheHotTubLady
3 ай бұрын
Unfortunately no
@Disciplineofjiujitsu
Жыл бұрын
Does the cartridge ever need to be cleaned or wiped during its life?
@TheHotTubLady
Жыл бұрын
It’s not a bad idea to inspect the cell from time to time. Knock off any vacuum build up or debri that is between the blades
@Disciplineofjiujitsu
9 ай бұрын
I’ve let my salt cell stay in 3 months over the recommended change. Still making chlorine, actually dark purple on reading. Is too much chlorine bad??
@TheHotTubLady
9 ай бұрын
count your blessings and continue to keep an eye on it. What do you have the salt system set at?
@josephgoggin7539
2 жыл бұрын
Is there any indication on the salt cell visually to tell that it is exhausted?
@TheHotTubLady
2 жыл бұрын
No. Sometimes you will get a calcium build up but not every time…. So unfortunately there is no way of knowing other than the hot tub telling you it doesn’t like the cartridge anymore
@wnddyer
3 жыл бұрын
I've had my Envoy for 5 days. I removed phosphates from water so they say 0, my hardness is 25, I added about 7 1/2 cups of salt and my salt system dial still points to low almost in the red. I don't understand how to make that dial go higher.
@TheHotTubLady
3 жыл бұрын
The dial measures two things. The amount of salt that is in the water 💦 and the output of your cell. If it is in working order and the salt system is operating you are good. What is the salt reading on the test strip. Not the dial but the test strip?
@wnddyer
3 жыл бұрын
@@TheHotTubLady the salt test strip is right at 1750.
@TheHotTubLady
3 жыл бұрын
If it says the salt system is operating I wouldn’t worry about it. You do not want to add any more salt. Hardness is at 25 you should be good to go.
@TheHotTubLady
3 жыл бұрын
The light will blink green if it is not happy with the ranges your tub is in.
@markbair1269
Жыл бұрын
ive drained and replace salt cell and its still reading low even after i have put on 24 hr boost and suggestions on trouble shooting this problem? ive balanced hot tub and heated to 101 everything working well except the salt system
@TheHotTubLady
Жыл бұрын
Well, im guesing you are a bit behind on chlorine. i would add 3 TBS of chlorine every day for the next 3 days. your salt system should kick in after that.
@markbair1269
Жыл бұрын
@@TheHotTubLady I did add chlorine every day and reading free chlorine at high at 10 on test strip. Could be too much? I also did phosphate test read at 300 so put in phosphate remover and water clarifier. When I run cartridge test says ok at 9 o'clock position but won't go any higher with boost or level at 5-7? I'm at a loss
@luannjusino1174
2 жыл бұрын
My remote now says timed out
@TheHotTubLady
2 жыл бұрын
Is it on the docking station?
@markbair1269
2 жыл бұрын
what if you have too much salt in the tub and reads well over 1750
@TheHotTubLady
2 жыл бұрын
If the salt test strip is over 1750. You will need to do a partial drain
@jeffreyredenius6087
Жыл бұрын
I drained 25% of my tub and I was able to drop the salt amount…but then it rose again. I didn’t add salt. Why?! Does adding spa down increase total salt?
Пікірлер: 50