Excellent, simple said coupled with being clear and concise. Much appreciated thank you.
@AlexTheGrumpyOne
7 ай бұрын
Thank you very much 😀
@iankennedy1729
2 ай бұрын
Great helpful video. Thank you very much!
@AlexTheGrumpyOne
2 ай бұрын
U are welcome. Thank you for your comment 😀
@Steele44320
Ай бұрын
Great info rotational teeth spec
@AlexTheGrumpyOne
Ай бұрын
Thank you
@richardwallinger1683
11 ай бұрын
I did my 2001 VW caravelle 2.5 tdi a number of years ago .. The DM flywheel was in as new specification .. so I fitted a new clutch plate and release bearing . an interesting in bellhousing slave cylinder and release bearing combined . . aggressive driving equals knackered DM flywheels .
@AlexTheGrumpyOne
11 ай бұрын
Yep unfortunately that does happen 😞
@flavijomance5341
Жыл бұрын
Very helpful mate ❤
@AlexTheGrumpyOne
Жыл бұрын
Thank you very much!
@cristianseminario7899
2 жыл бұрын
at that point just scrap it and slap on the conversion kit to a normal flywheel no more problems and the car is faster
@AlexTheGrumpyOne
2 жыл бұрын
There is that solution you are right. But I had a spare flywheel for one of them that was quite handy in the end.
@maxthecaddy8451
2 жыл бұрын
same check for most dmf, also the center ring of dmf can collapse resulting in getting no gears and that's what happened to mine 1.9 tdi it was a new dmf, clutch, pressure plate and thrust bearing from luk lasted 2 weeks, sent back to luk for there boffins to look at and they found that the middle of the dmf had dropped 1mm, sent a new complete clutch set back for me and so far all is good, 👍
@AlexTheGrumpyOne
2 жыл бұрын
Bloody hell that's a bit annoying bud. I'm glad you got it sorted now. Yeah 1.9 tdi is the same pretty much 😀
@MrBojangles901
2 ай бұрын
I feel like I might have a problem with the flywheel in my Audi A3 2005. After some city driving there is a steady knocking sound when depressing the clutch halfway. If I continue pressing the clutch all the way down the knocking is dampened. If I try to engage first gear to drive there is a strong shudder and I have to give more gas to even be able to move the car. Once the clutch is released the car drives normally. I've ordered a nrw clutch but I'm prepared to order a flywheel as well. I'll see what it looks like with the transmission off.
@conorodonnell1826
Жыл бұрын
Great video 👍👍
@AlexTheGrumpyOne
Жыл бұрын
Thank you very much 😀
@stuartcotterill9475
4 ай бұрын
So i have a rattle noise sometimes when i come to a stop and reduces when i press the clutch. I have my flywheel out, theres hardly any side to side play, no metal sound, but i cant turn it even 1 tooth like you did on them?
@AlexTheGrumpyOne
4 ай бұрын
How about muddle bit. It can have and issue with the bearing. Also up and down movement.
@stEVEN_SMARTER
21 күн бұрын
Sounds like it's seized
@gokilavasm4510
2 жыл бұрын
Which flyweel ok boss
@AlexTheGrumpyOne
2 жыл бұрын
The one that has got less movement
@markecho6567
11 ай бұрын
Thx for the advice , what sort of money would it be for a t5 05
@colinpadley1897
Ай бұрын
I took my car to the BMW main dealer, a warning light had come up, the car has only done 60,000, they're saying the clutch and flywell are badly damaged, the car drives perfectly, my question can they tell this without stripping it down? The replacement is very expensive!
@AlexTheGrumpyOne
Ай бұрын
Is it knocking or etc? What's the light? Have you got a codeM
@colinpadley1897
Ай бұрын
@AlexTheGrumpyOne I got the message drivetrain, they said the clutch and flywheel are badly damaged, can't see how they can tell about the fly drive until its taken off? The car has only down 60k, no knocking etc, drives perfectly.
@blixtkrig
4 ай бұрын
I have som ratteling noice from flywheel when idling ..dont hear it when im in the car but under .258tkm on the clock .new clutch?
@AlexTheGrumpyOne
4 ай бұрын
It would be probably new flywheel and Clutch yes. Does it go away when press the clutch pedal down?
@blixtkrig
4 ай бұрын
@@AlexTheGrumpyOnehavent tried that i was alone in the shop.thank u
@AlexTheGrumpyOne
4 ай бұрын
Give it a try and see if when you press the clutch the noise goes away then u know u are after a flywheel and a clutch.
@samdavinchi1624
Жыл бұрын
How do I know if my golf has solid or dual mass.?? Golf . MK4 . TDI. 130...
@AlexTheGrumpyOne
Жыл бұрын
Mk4 is probably dual mass at that stage. U can look up the parts on Eurocarparts and they will tell u
@samdavinchi1624
Жыл бұрын
@@AlexTheGrumpyOne Thanks a lot for your response 👌
@AlexTheGrumpyOne
Жыл бұрын
No worries 😀
@abdulbeany1894
5 ай бұрын
Hi my car vibrates at idle only when engine is hot can that be flywheel thanks
@AlexTheGrumpyOne
5 ай бұрын
Yes it can. Does it stop vibrating when u press the clutch down?
@abdulbeany1894
5 ай бұрын
@@AlexTheGrumpyOne when I press the clutch the rattling stops but the vibration is still there it only does it when the engine is hot and at idle thanks
@AlexTheGrumpyOne
5 ай бұрын
@abdulbeany1894 yes they are usually worse when hot. When the metal expands and etc it affects it more. I would definitely say that you are due to a flywheel and clutch
@abdulbeany1894
5 ай бұрын
Does that sound like a flywheel car is audi a4 b7 2.0 tdi
@abdulbeany1894
5 ай бұрын
@@AlexTheGrumpyOne thank you very much will get that sorted
Пікірлер: 42