How to check the charging cable passage for the Honda Beat Karbu motorcycle battery that quickly falls, cuts and dies.
through the function on the kiprok socket pin or Honda beat regulator, the vario carburetor has 4 cable colors, meaning:
1. The yellow wire on the lower left is the main current for the lamp from the road spindle and into the kiprok and back out with the yellow wire straight to the light switch. And for this yellow wire there is nothing to do with battery charging online.
2. The green wire on the top left as mass or ground, make sure it is attached to the frame or motor body. If it is not connected to the frame or body of the motor, the lamp will fall off quickly and the lamp will quickly turn off.
3. The white wire on the top right is the charging line from the road coil leading to the kiprok and make sure there must be a current. If there is no current then the road bobbin is burned or something is broken.
4. the red wire under the right is the current output of the kiprok, make sure there must be current. if there is no current then the kiprok is damaged.
Thank you so much to all #SUBSCRIBER#and viewers wherever you are, hopefully the knowledge is useful.
please # SUBSCRIBE AND LIKE #
#NURYADEN PRINTING CHANNEL#
If you have any questions, you can write them in the comments.
Tel/WA: 085863491419.
Thank you very much.
Негізгі бет How to Check the Honda Beat Motorcycle Battery Charging Cable Line, Vario Karbu Quick Drop,Overdrawn
No video
Пікірлер: 400