How to check the ignition cable path for the Honda Revo Absolute Fi injection starting from the kiprok ecu spool and the coil.
the first step we have to check is make sure the battery current is good at 12 volts dc.
then for the road spool line, check the green cable as the road spool and the white as the charging spool that goes to kiprok make sure there is current.
then check the red wire, the yellow line in the middle above as the output current from the kiprok that goes to the plus battery. Make sure there is a current.
then check the red wire, the white line and the yellow red line, make sure there is current before contact.
then check the contact output, make sure the battery current is in the coil and ecu socket.
then check the positive and negative pulsers from below that go to the ecu and make sure there is a current. check using a used gasoline gas led lamp.
and it's also time to make sure the ecu is working, usually the green wire.
then check the ecu output cable, the blue line ping cable, make sure the current is in the coil, and also make sure the coil output current going to the spark plug has current.
Thank you very much to all #SUBSCRIBER#and viewers wherever you are, hopefully the knowledge is useful.
please #subscribe#
@Sidik Nuryaden CHANNEL.
If you have questions, you can write them in the comments.
Thank you very much.
Негізгі бет Автокөліктер мен көлік құралдары How to Check the Honda Revo Absolute FI Injection Ignition Cable Line, From Spool, Kiprok, Ecu, coil
Пікірлер: 197