jason can you stop emailing me about i forgot items in my cart i didnt forget them im just poor and waiting for my wife to not be looking lmao keep up the good work gps i enjoy the videos and the podcast
@GoPowerSports
Жыл бұрын
haha, sorry about that.
@beaubrummelmotorizedbicycles
Жыл бұрын
You might want to disregard his recommendation of Chain Wax as the lubricant for the "Oilite" bushing in your clutch and go with a 30 weight non detergent oil or any specialized bushing lubricants.(light machine oil, etc.) Remember the rule of thumb, normally bearings require grease and bushings require oil.
@inspireonex
Жыл бұрын
It's interesting that you mentioned that 1" clutch for 18hp engines. Your website says it's "rated for up to 7hp".
@GoPowerSports
Жыл бұрын
True, the factory will have it only rated up to 7HP. But we have seen Stage 1 Predator 420 Engines on Coleman Minibikes that use this 1" Bore 1041 Heavy Duty Clutch. The lighter the rig, the longer your clutch will be useful. I definitely would not recommend this set up on a Live Axle Go-Kart.
@user-qb6os4ko2s
6 ай бұрын
I always lube up the inside of the clutch, it supposed to help the clutch live longer
@alohabobbylaguna1702
Жыл бұрын
i have Honda gx 270cc with a wet clutch from the factory is this a good setup my local go kart track in Santa Clarita California MB2 has honda gx 160/200 with a wet clutch
@jamescampau9196
25 күн бұрын
Ive got a streached mini bike that im planing to put a honda gx390 into but i still cant decide on gettin that meaty clutch or going for a 40 series
@GoPowerSports
22 күн бұрын
Centrifugal clutch will be easier to use and still hold up, but that 40 series torque converter is a great upgrade if you can fit it.
@myparadiseonbantayanisland9030
Ай бұрын
Do.they make heavy duty 1 inch clutches with 1000 rpm stall speed. I am using it on a boat so that is why i need a low rpm stall speed.
@GoPowerSports
Ай бұрын
Sorry, do not stock.
@vgnope
Жыл бұрын
Currently I have a Hilliard heavy duty for predator 212 stage 2 on racing kart. #35, 12/60-5:1. I think it’s time to upgrade
@jpatt5825
8 ай бұрын
I have just built a gokart with my cousin. All is good except the clutch. Its not engaging 😢 its a 13t 1" bore, 420cc 15hp. When the engine revs it doesn't engage. All we hear is the clutch rubbing off the metal. Any suggestions would be great. I have video if needed
@beardnovs8732
2 ай бұрын
Check the shart regulator.
@kx1260
22 күн бұрын
My clutch I got from you guys does not have a key . It came with a small bag with 3 little pieces and two screws but I cant figure out how to put this on..
@GoPowerSports
21 күн бұрын
Is one of the 3 little pieces a key? It should look like a rectangle steel piece.
@kx1260
21 күн бұрын
@@GoPowerSports yes there's a small little key thing that came with the two small screws. Just not too sure how to put this in been trying to figure it out myself or find some kinda tutorial. I wanna put the clutch on "backwards" because I run a straight chain. Thank you
@818adventures
8 ай бұрын
I just got the Trail master storm 200 from go power sports. It's been a head ache !! My clutch bolt wasn't placed in right and something broke within the first 45 mins of using the mini bike . !
@CharlesNewkirk-lb6uh
8 ай бұрын
All right!
@gets-it-in3658
6 ай бұрын
Why would someone want to buy a more expensive $200 clutch over a max torque clutch? I am going to buy a new one tomorrow and I’m trying to figure out the difference between them
@GGGmodzs
9 ай бұрын
What if i have a 30t rear sprocket?? How can i go fast in a 212cc
@jerryalgandar2212
17 күн бұрын
What clutch for a 224 #35
@GoPowerSports
15 күн бұрын
You'll need a 3/4" bore Centrifugal Clutch. #4335 or a 2-Disc Clutch would be a good choice depending on your set up.
@mogong7260
Жыл бұрын
I want my bike to go fast but not to do wheelies 😬 what kind of gear or clutch do I need ?😬
@GoPowerSports
11 ай бұрын
6:1 or bigger!
@mogong7260
11 ай бұрын
@@GoPowerSports I searched for 6:1 clutch or gear I can't find them.🤦♂️
Пікірлер: 31