Did this to my son's intake and it made a huge difference. I recommend this video to anyone pulling an intake to take the extra time to clean it out nicely.
@martinbuilt
6 ай бұрын
I'm glad you liked it and found it most helpful. Thank you for watching and recommending this video.
@BioExtract
3 жыл бұрын
A simple, honest, demonstration of a process that works. Thank you sir, very useful information!
@martinbuilt
3 жыл бұрын
So nice of you, thank you. 😎
@climbjt
2 жыл бұрын
Took mine to a machine shop. For $40 they put it in a ultrasound tank. Even the brass nut-serts came out shiny
@joesyoutubepage
Жыл бұрын
free
@TranceFur
Жыл бұрын
No Joey, not free. $40 he said.
@dhalsim-1
9 ай бұрын
$40
@chrismason1167
7 ай бұрын
Lol
@frozenking9394
5 ай бұрын
lol lov da knowledge bout to put all my old bolts back on lol for dat same shine
@gregkeller80
Жыл бұрын
That looks like the perfect brush to clean between the truck bed and cab! I’ve been looking for something like that for years lol. Thanks!!!!
@irvonovisuals
4 жыл бұрын
Purple power is one of the best degreasers out there. Use it to clean my engine bay and does wonders.
@gregcorley4809
4 жыл бұрын
This is is perfect! Recently picked one from salvage yard and needs to be cleaned. This couldn't have come at perfect time, Thank you Martin!
@ravenn.francis7434
4 жыл бұрын
Greg Corley same here got it today and this is helping greatly
@monkeyslap
4 жыл бұрын
This should be retitled to "Giving Your Intake Manifold a Colonic"
@graysonsamples8096
2 жыл бұрын
Lmao
@Ben-nx7yy
Жыл бұрын
😂
@donnarichardson2888
Жыл бұрын
Thank you so much Martin!! I cleaned mine on my 91 chrysler lebaron 3ltr v6 wit 87,000 original miles. It was full of carbon on upper and lower intake manifolds. I didn't use the purple power I used dollar generals LA's TOTALLY AWESOME degreaser and cleanser for about $1.50 half gallon took longer as I couldn't fine any of ur stuff. I also uses the long lint brush. Ur a life saver! Wish I could send u b4 and after pics, shining like a new dime! Have a Blessed day!!!❤
@elavation7890
3 ай бұрын
I'm going to do this I took my intake manifold out for this exact reason. Question where can I get a long brush.
@351cleavland
2 жыл бұрын
Thanks for the video. FYI-that Puprle Power is great stuff BUT be careful as it can disolve concrete. I spilled some in my garage floor a the spot started to become rubble.
@martinbuilt
2 жыл бұрын
Yes I've actually used it for a driveway cleaner before and it does work well but you gotta work fast because it can remove the finish. You need to rinse it thoroughly with water.
@torque258
4 жыл бұрын
Another good video! Very handy. Are we just going to ignore the fact that he's a ghost? Love the entrance!
@nariwalsh
2 жыл бұрын
Thank you so much for this! My car was so gummed up inside I wasn't sure what to do. This helps me out a lot!
@martinbuilt
2 жыл бұрын
Thank you for watching, I'm glad to hear you found this video help.
@Verdandi_P
2 жыл бұрын
It's so cool how he has the ability to phase in and out of reality. Oh and yes thanks for the car help .
@martinbuilt
2 жыл бұрын
Glad you enjoy the disappearing act. 😉
@animationcrate
2 жыл бұрын
@@martinbuilt thanks man. My dad is really good at that, I've been waiting 22 years for him to come back
@johnsauer8508
Жыл бұрын
Thank you for doing this video. It was spot on for what I was looking for. I got the lint brush, and of course the purple power and the results were just as you demonstrated. 2006 LS intake looks brand new.😊
@shawnderrick1952
4 жыл бұрын
Another great and effective product for cleaning oily and carboned-up engine parts is professional HVAC outdoor coil cleaner.Some name brands are "Nu-Brite" and "Foam-N-Clean",with several store brand type knockoffs as well.These are concentrated alkaline products that react with the aluminum fins on the outdoor coils by foaming up and lifting off any dirt or corrosion,but they also work very well for soaking freshly disassembled nasty parts from a junk motor,for example,or any other metal part.I would not use it on that plastic intake,and it is very caustic and corrosive,so rubber gloves and caution are mandatory,as is heavy rinsing with the garden hose,but the stuff works great!Just FYI.Also, your vids were very informative during a recent rebuild of the 4.7 in my 2000 Grand Cherokee.Keep'em coming!
@barrynzay
2 ай бұрын
Great video. I had the idea to use purple power on my upper intake too after needing to replace the bushings on the intake manifold runner control valve of an 02 mustang and wanted to find some videos of how other people cleaned theirs and this was very reassuring. I think I'd get along well with this guy if we ever had to work on a vehicle together.
@koolkeith7285
2 жыл бұрын
Really great choice of music. Thank you for giving me more inspiration to turn my car into the badass it was once made to be
@martinbuilt
2 жыл бұрын
I'm glad you like it. Yes this intake has been one of my best improvements for the 4.7
@fireyourrocketts
2 жыл бұрын
Just realized need to clean the one in our 2004 Corolla that is being engine overhaul, ordered Simple Green HD Purple as it wins a review vs Purple Power as more biodegradable. Will do that as soon as it arrive. Thank you for the great video.
@martinbuilt
2 жыл бұрын
Thank you I'm glad you liked it and found it helpful.
@joelh3030
Ай бұрын
My 1.8 corolla has oil dripping from the bottom on the manifold, I will be replacing my PCV valve and cleaning my manifold the same you just did. Thanks for the video!
@martinbuilt
Ай бұрын
I'm glad you liked it and found it helpful. thank you for watching.
@RbNetEngr
10 ай бұрын
Nice job making this video and describing all the steps involved.
@martinbuilt
10 ай бұрын
Thank you. I really appreciate that. I'm glad you liked it and found it helpful.
@ricer0cket25
Жыл бұрын
Super clean works really great too I like purple power also
@moonrocktank7771
4 жыл бұрын
If only this video had come out last week when I had my intake manifold out😢, Great video btw though👍
@martinbuilt
4 жыл бұрын
Thank you!
@manufacturingdefect1287
4 жыл бұрын
Haha take it out and clean it😉
@moonrocktank7771
4 жыл бұрын
manufacturing defect Cant😢, it dropped a valve about a month ago
@manufacturingdefect1287
4 жыл бұрын
@@moonrocktank7771 sorry about that
@ascendantrobin3230
4 жыл бұрын
Martin, your vids are always informative and inspiring! Congrats on your success thus far! God bless, and keep Jeepin’ 😎
@gregj.gotham4402
3 жыл бұрын
I like the links to items used during your videos. I purchased the brush from your link thank you. Your videos are the best giving all information as you do your work very good explanations.
@martinbuilt
3 жыл бұрын
Glad you enjoyed it and found it helpful, and thank you for purchasing through the links that helps out the channel.
@rbsizzle
4 жыл бұрын
I just sourced a liquid intercooler from a Ford Super Duty to use on my project (because I'm cheap and re-purpose parts from other cars). Anyways, I didn't know how I was going to clean all the carbon out the damn thing. Saw your video, went to Sam's and bought a knock off purple power, let the thing soak, and now its spotless. Thank you so much.
@martinbuilt
4 жыл бұрын
that's awesome, thanks for watching!
@writtenpieceopaper1
Ай бұрын
Thank you sir. Doing this on an 07 silverado. Getting that brush.
@wellnessotr
10 ай бұрын
I’ve never cleaned my intake, but it definitely needs it! I’m cautious about what kind of chemicals to use on my plastic intake because I don’t want to have to buy a new one.
@martinbuilt
5 ай бұрын
Those plastic intakes would probably stand up to most any chemical like the one I used or purple power, super clean, totally awesome.
@delb6923
Жыл бұрын
Purple Power every drop is like Gold, good stuff!
@martinbuilt
Жыл бұрын
Thank you for watching.
@williams6550
4 жыл бұрын
Purple Power is the best. Good tip about getting water from the bottom of the heater, by the way!
@GeloNegron
3 жыл бұрын
Zep Purple!!! Works AMAZING and delete your PCV Valves Ladies and Gents! After that you can even go the extra mile and cut off your cctalytics, car will not smoke or make more emissions BECAUSE you eliminated the PCV system.
@bobruediger7468
4 жыл бұрын
Your videos are very educating and clearly shot. Keep the the good work
@martinbuilt
4 жыл бұрын
Thank you, Bob!
@wtzszombiesprod.3666
3 жыл бұрын
that's a whole lot dirtier than I expected. Lm7 5.3 got mine off, shes definitely getting the same treatment, nice video boss
@martinbuilt
3 жыл бұрын
Thank you, glad you liked it.
@jaredchance8903
2 жыл бұрын
How much would a mechanic charge to clean the intakes???
@donaldrippetoe5246
7 ай бұрын
I really appreciate your video! It really helped me quite a bit! Thank you for sharing!
@martinbuilt
7 ай бұрын
You're very welcome I glad you liked it and found it helpful. Thank you for watching 😁
@yermiyahbenisrael7182
Жыл бұрын
Thanks for the video. This was real helpful
@martinbuilt
Жыл бұрын
Thank you I'm glad you liked it and found it helpful.
@ninjagodzilla6402
3 жыл бұрын
Just changed the knock sencors on my 4.8 vortec engine.when i pulled that intake manifold off ive never seen so much carbon buildup in a engine like that.i have 421,000 miles on it & it shows it.im defintly about to purple power that rascall.thanks.
@martinbuilt
3 жыл бұрын
After cleaning it up with purple power you may consider installing a oil catch that will keep that intake manifold clean.
@brendenbynum6810
Жыл бұрын
Glad i watched this😂 i was going to use my intake off of my blowed up engine and well there was remains of a piston and rings in there small enough to definitly ruin the other engine
@martinbuilt
Жыл бұрын
Yeah you gotta be real careful with used intake manifold especially if they came off of engines that blew up because it will literally suck stuff from one intake runner to another.
@greghubert4968
4 жыл бұрын
Another project on my list to do, Thank you Martin
@martinbuilt
4 жыл бұрын
Have fun!
@tedthornton7791
Жыл бұрын
How about the mating area on the actual engine? Got any videos on doing that? Great job
@davecpgh
3 жыл бұрын
One quick note: Purple Power is corrosive. (Labeled on the back of bottle) You need to take off anything metal on the manifold. Such as that 1 bolt still in there. Did this video a year ago, that bolt is most likely completely rusted now and the others look good as new.
@martinbuilt
3 жыл бұрын
I've been using purple power for 15 years to clean engine parts as long as you don't let it soak In purple power for an extended period of time especially with aluminum it's perfectly safe I've never had any parts rust due to purple power. And as explained in the video to thoroughly rinse the product after cleaning it with purple power. Otherwise you will end up with a chalky residue especially on aluminum parts..
@Mopar_Sevastian
Жыл бұрын
Good video very transparent on the cleaning procedure
@martinbuilt
Жыл бұрын
I'm glad you liked it and found it helpful. Thank you for watching.
@quarkymatter
11 ай бұрын
What about the part of the engine that the manifold attaches to? Most of my residue is in that part, but I dont want to spray any liquids in there. Is it safe to use air compressor?
@T3CN01
4 жыл бұрын
Dude love the music a true car guy channel thanks for the great 👍 content
@martinbuilt
4 жыл бұрын
Glad you enjoy it!
@rolandthebastard
2 жыл бұрын
Just finished the final rinse on the intake for my 04 Crv and it looks like a brand new part. I used one gallon of Purple Power undiluted and several different sized brushes. I let the intake soak in a Rubbermaid bin and then spent about an hour scrubbing. Thanks for the tip!
@martinbuilt
2 жыл бұрын
Thank you, I'm glad you liked it and found it helpful.
@Renowildfire1
Жыл бұрын
How'd it work?
@tedthornton7791
Жыл бұрын
How about the area on the engine where it mounts? Ideas for cleaning that?
@kyore789
Жыл бұрын
Big thanks I figured I could hose it down but had to make sure
@martinbuilt
Жыл бұрын
I'm glad you found it helpful. Thank you for watching.
@klowisrt
3 жыл бұрын
Hey Martin, I also have some Power Purple. It is a good product. However, the instructions specifically say NOT TO USE ON ALUMINUM. Maybe the manifold you are cleaning in the video is not aluminum, but I did hear you mention that if you were to use Purple Power on an aluminum intake to be sure to rinse well to prevent the white stuff that builds up.
@MartinJones1
2 жыл бұрын
Wish I read your comment first :(
@kevincraven2581
2 жыл бұрын
ruined my fuel rail and oxidized the whole manifold
@matthewbim10
3 жыл бұрын
New viewer here, thank you for your view on this procedure.
@martinbuilt
3 жыл бұрын
Glad you liked it, 😊
@wolfsmane
3 жыл бұрын
This is exactly what I searched for, Thanks! Purple power sure isn't what it used to be. I was using this back in the mid to late 80's and you didn't dare use it without gloves on, as it would start drying your skin out to the point of the skin cracking. I know that they took it off of the consumer market for a while and then brought it back out as a diluted version.
@martinbuilt
3 жыл бұрын
Yeah I didn't start using it until 2005 and it still isn't the best thing for your hands.
@Roman________
3 жыл бұрын
Super clean is now the new thing out works way better than purple power ! I used to use purple power tell I heard of super clean . Almost the same but cleans a lot tuffer. With less effort .
@theundergroundlairofthesqu9261
2 жыл бұрын
@@Roman________ I've been using Super Clean since the mid 90's, when it used to be Castrol Super Clean. I use it for most things, and rarely use brake cleaner spray for anything except brakes. Gallon jugs at Wal-Mart!
@jamesdewer
Жыл бұрын
I recently upgraded with a new engine for my 4.7. I went with a 2008 intake manifold. Let me just say after you go to the larger intake you can definitely want to go with mid-grade gasoline. So that didn't take manifold a different throttle body 70 mm and different intake injectors I went with four port and removing the torque management was easily a 35 horsepower increase.
@martinbuilt
Жыл бұрын
I'm glad to hear it all worked out as I would expect. Yeah I would say I gained probably the same horsepower that you're claiming, it sure felt like it anyway.
@jamesdewer
Жыл бұрын
@@martinbuilt oh yes the jump to mid-grade 08 intake injectors, new motor 😎, torque management delete. Big games in horsepower it runs like a proper V8
@jamesdewer
Жыл бұрын
I also did a full suspension rebuild. My frame straightened. Could I send you pix?
@jamesdewer
Жыл бұрын
Hey Martin, So after I got the new engine. It smoked a bit for about the first 200 miles then settled in nicely. Around 1500 mi I had to bring it into the shop. It's in the shop now actually. It was smoking bad It was letting out a cloud of white smoke I'm not sure if it's water getting in the cylinders or what? Compression felt good though just the smoke man, was eating oil. It's also detonating a little so I'm thinking non- Mopar cheap ass hydraulic lash adjusters went flat.
@sugrue8526
2 жыл бұрын
Yup PCV valves are goof idea. Don’t want harmful vapors in the atmosphere. But if you want get a car to run well, hose it all out all over the ground. Need PCV, just don’t need to run it into intake
@Bangincheeks369
5 ай бұрын
Wow this is a great idea! I’m gonna do this. Thanks for the video!!
@martinbuilt
5 ай бұрын
I'm glad you liked it and found it helpful thank you for watching.
@jamesdewer
Жыл бұрын
Dang Martin All those 0 to 60 pulls.
@MartinJones1
2 жыл бұрын
Well hopefully others will read my comment first before making the same mistakes as me: 1. Do follow safety instructions. Purple Power will tear up your hands. 2. Do not soak parts long term in the stuff. I figured if it soaked white stuff would not appear. It will actually form under the surface of purple power. 3. Yea, don't use on aluminum. 4. Even after soaking it, I still have deposits inside my intake plenum.
@87tunj
4 жыл бұрын
I love it. Washes it all down the storm water..
@jagboy69
3 ай бұрын
Chooched that intake pretty good!
@constructiontech1970
4 жыл бұрын
Martin I started using Purple Power last year and it is a fantastic product!
@calorcito4209
4 жыл бұрын
Nice video! I need to clean an intake since it has metals from a valve!
@martinbuilt
4 жыл бұрын
Thank you, you may need to replace the intake, after cleaning it I would use a inspection scope to make sure you got all the metal removed.
@joshuajuarez4754
3 жыл бұрын
thanks for the info I'm 13 but I still wanted to learn about this
@martinbuilt
3 жыл бұрын
Thanks for watching Joshua.
@PhantomMiles
16 күн бұрын
hey man. you should try with ultrasonic cleaner. in this case need the bigger one to fit entire thing. and some engine degreasser. the bad thing. can be expensive
@martinbuilt
13 күн бұрын
I'll have to look into it an ultrasonic cleaner that large would probably be quite expensive. Perhaps I could even build one. Thank you for watching.
@1badcj8
4 жыл бұрын
Freakin' Awesome! Thanks Martin.
@LZDEN
4 жыл бұрын
good work Martin...cleaned up very nicely.
@texas_guy_85
4 жыл бұрын
That was a huge difference.
@martinbuilt
4 жыл бұрын
Yea it turned out great, thank you.
@NDLAP66
2 жыл бұрын
Purple Power! I use that on everything
@Fooney1
2 жыл бұрын
Purple power is great for caked on geese too I have seen it used in restaurants.
@martinbuilt
2 жыл бұрын
yeah, this stuff works great. Also, try Totally Awesome, it is a little milder cleaner and is safe on aluminum.
@Fooney1
2 жыл бұрын
@@martinbuilt Yes also can confirm Totally Awesome lives up to its name. Guess if you can clean a geese trap you already know how to clean an engine haha.
@mr.iforgot3062
3 ай бұрын
I would just junk that manifold. I like my intakes to have a good build up of carbon to mellow out the timing.
@robkcra
4 жыл бұрын
I know that this manifold was obtained separately from any vehicle currently in your garage, but I have to wonder what the head would be like on the vehicle from which this manifold was taken? Specifically, if the head was in the same dirty condition as the manifold......how would you deal with it? Thank you.
@s.b5412
4 жыл бұрын
Thanks Martin learning from you a lot...
@buggyB0o
4 жыл бұрын
Your neighbors love you....
@howardcamp1291
4 жыл бұрын
Thanks, Karen.
@jeffklonowski6816
Жыл бұрын
Rebuilding my 99 350. Lots of cleanup required
@danhambrick6331
4 жыл бұрын
Nice job Martin.I wish I would have taken the time to do that to mine when I just recently replaced my heads.I just wanted to get my truck back on the road.It is my DD...
@martinbuilt
4 жыл бұрын
Thank you, Dan, I here you. What happened that you had to replace the heads?
@danhambrick6331
4 жыл бұрын
That stupid plastic T at the heater hose connection busted while driving down the interstate one morning and it over heated.I didnt really know how bad it was so I replaced both heads.Timing chains,water pump,fan clutch,belt and tensioner were also replaced at the same time.Almost forgot I did lifters too....Come to find out it was only a head gasket..She runs pretty good now for having over 200,000 mi.on her.....
@AngelsDontFall
6 ай бұрын
I used dry laundry detergent and hot water with a long bottle brush from the 99 cent store
@autotech265
3 жыл бұрын
Hmm very similar to cleaning a dirty bong. A Helpful tip: Use salt or a light abrasive to help scrape off resin/carbon .
@martinbuilt
3 жыл бұрын
Thanks for sharing...Lol
@donaldsilversmith248
4 жыл бұрын
Thank's Martin iam going too do mine too an crank case breather system probably be the best time to thank's
@martinbuilt
4 жыл бұрын
Glad you found it helpful.
@chrisbishop2825
2 жыл бұрын
ISNT THAT THE HOME DEPOT COMMERCIAL SONG IN THE BACK? LOL
@martinbuilt
2 жыл бұрын
Lol...I didn't even know that Home depot had a song. I check it out. It does sound the same. 🤣
@elysianfields6350
2 жыл бұрын
Oil catch can minimizes blow by. Next step is an equivalent for the egr contamination.
@martinbuilt
2 жыл бұрын
For sure, I also purchased one I have yet to install it. I got mine from Radium; their products look like a work of art and cost like it to.
@elysianfields6350
2 жыл бұрын
@@martinbuilt I put a stainless steel scrub pad inside to increase the precipitant surface.
@soolomies
4 жыл бұрын
Next suggested video is "Never carbon clean your car's engine" by Scotty Kilmer :)
@kaiokenx1005
4 жыл бұрын
Awesome thank you sir. Alot of help
@RS-qp4bp
4 жыл бұрын
I've used purple power for 10 years here and there mostly on my driveway. When I saw you using it with bare hands I cringed because that stuff will melt your skin. You normally dilute the PP with hot water to "activate" it. I'm no tree hugger but I would have contained two gallons of contaminated Purple power and disposed of it properly. Other than that, good video.
@dr.moustafaibrahim6810
2 жыл бұрын
Thank You for the video
@martinbuilt
2 жыл бұрын
I'm glad you liked it and found it helpful. Thank you for watching 👀
@vids1229
11 ай бұрын
In Australia they charge 2k plus
@nia6849
3 жыл бұрын
I used a brake cleaner to clean inside the intake manifold.
@delroyjohnson36
2 жыл бұрын
Way Way Way Better
@frankgonzalez534
Жыл бұрын
I use full strength Awesome
@YermiYah328
9 ай бұрын
Thankx 4 the video Brother. Very helpful.
@martinbuilt
5 ай бұрын
My pleasure, glad you liked it 😊
@klowisrt
3 жыл бұрын
Hey Martin, My apologies, I miss read the instructions, it says to test an out of sight area...especially aluminum. My bad, it looks as though it has been used on aluminum but to use it with caution and to test an out of sight area first. My apologies.
@martinbuilt
3 жыл бұрын
No problem, yeah it definitely will mess up aluminium especially if you good soak it for any period of time. It works great on these plastic intake manifold like I used in the video. Another great alternative is Totally Awesome that works well with aluminium.
@Arrambide02
2 жыл бұрын
My intake on my Chrysler has a runner that opens the flaps to allow air to come in manifold. If After I clean out all the carbon if I spray some WD-40 on the runner that controls that flapper would that cause issues? The friction of the runner due to the carbon buildup is causing my car to code.
@bobwa399
2 жыл бұрын
We dont have any particular cleaner...can I use Petrol , kerosene or Isopropyl Alcohol. We do have carborator cleaner in cans can that be used too?
@charlesjudd5074
3 жыл бұрын
Anybody else get Bob Ross vibes off this guy?
@jorgenegron5169
2 жыл бұрын
My 2013 f150 v6 3.7 has a weird noise when I put on reverse and drive on neutral and parking no and thr mechanic noticed the noise came from the intake what to do? Thanks
@raygonsales1680
2 жыл бұрын
Marvelous Martin! Awesome 💪💪👍👍
@martinbuilt
2 жыл бұрын
Thank you Ray I appreciate that I'm glad you liked it and found it helpful.😎👍
@Ty-tie_FTW
4 жыл бұрын
Didn't want to try the blow torch and compressed air method on that plastic manifold?
@martinbuilt
4 жыл бұрын
I think I'll stick with the Purple Power/brush method...lol
@r.blanco7520
4 жыл бұрын
Nice video Martin. I have been thinking on doing this for a while. Have you run the manifold after the cleaning? Any issues if you have. Thanks.
@martinbuilt
4 жыл бұрын
This manifold will be going on the HO engine that I'm rebuilding. I have used this same method to clean the intake that I'm currently running on my 04 Jeep Grand Cherokee.
@forestbum
Ай бұрын
good video thanks man
@jameybarisoff
3 жыл бұрын
That music rocks!
@martinbuilt
3 жыл бұрын
Glad you enjoyed it.
@HeyUncleA
4 жыл бұрын
Can we clean the intake without dumping all the stuff in the river?
@martinbuilt
4 жыл бұрын
Purple Power is Powerful cleaner & degreaser, Non-Abrasive, Biodegradable & Phosphate free. One of its uses is a driveway cleaner, they wouldn't least as one of its uses if it wasn't safe.
@robbieheath5894
4 жыл бұрын
Ok what were you cleaning out of the intake? Carbon and oil. Stop being a hack. The Epa would destroy a business if they saw them doing that.
@JockeyCake
Жыл бұрын
Thank you this video
@vincentlee2460
2 жыл бұрын
Purple power video
@jc8liter2388
4 жыл бұрын
Good video, man! What did you use to shine up the plastic on the outside? My LS intake manifold is looking beat. Thank you.
@martinbuilt
4 жыл бұрын
Thank you, I used MEGUIAR'S Ultimate Black Plastic Restorer amzn.to/31hMFsD
@kevincraven2581
2 жыл бұрын
Purple power oxidized my intake manifold leaving it white and corroded the fuel rail badly. Didn't remove the build up inside be careful with this stuff
@AP-514
8 ай бұрын
do not use on an aluminum intake ! ! Doho----
@mainsfortes5778
3 жыл бұрын
Did you use the degreaser full strenght?
@martinbuilt
3 жыл бұрын
yes full strength.
@sapphirespica1152
Жыл бұрын
I have code p2006 one of them stuck open will this clear the code? Engine light on need smog! :(
Пікірлер: 394