⚠️⚠️⚠️Hay bud. Penetrating oil devolves what little grease or gear oil they use on the bearings. After cleaning the penetrating oil will evaporate along with the lube it needs. Always add lube after penetrating oil is dry. Penetrating oil has a solvent mixed with oil to thin it out. It literally melts grease from bearings. Add penetrating oil to a squeaky bearing, the squeak stops temporarily then it comes back louder.
@julianwillems2295
Жыл бұрын
How long does it take for penetrating oil to dry?
@Aucklandsaltwaterflyfishing
2 жыл бұрын
if you fill a glass up with the fluid and dip the motor in while it is running on a 12v battery you will also clean the brushes and the commutator. You can use wd40 or brake cleaner or similar.
@Ladysman_217
3 жыл бұрын
The problem with spraying the penetrating oil inside of the can like that is that it attracts dust and it will get dirtier faster than it did before
@TheEgb18c
3 жыл бұрын
I'd blow it out as much as possible then
@MrWasim100100
2 жыл бұрын
why don't use a blower!
@LegendaryRc
4 жыл бұрын
awesome tip bro you got a new sub man
@maddog57ful
3 жыл бұрын
Lube the bearings with 10W non detergent Machine Oil.
@GuyslacklusterRcReview
4 жыл бұрын
cool video👍🏻😊😊
@juvaknin
2 жыл бұрын
cool nice to know that.. thanks! subscribed😎
@rickanthony8259
Жыл бұрын
How about using the wD40 first to loosen uo oil and grit followed by parts cleaner ?
@TheEgb18c
Жыл бұрын
That should be fine, just lube the bearings or bushings after
@TheEchelon
2 жыл бұрын
Penetrating fluid isn't lube, it's penetrating fluid... WD-40 is to loosen up rusty bolts, not for cleaning or lubricating.
@UAERCADDICTS
4 жыл бұрын
good to know subscribed
@TonysRcTechboom
4 жыл бұрын
Great video my freind , I do the same with mine, great how to Video, is that a 540 brushed Motor. Does it take 3s and are they fast Motors. ? Big THUMBS up from me and a sub to go along with that my friend 👍 keep safe and well and keep them coming. 👍🇬🇧😁🇺🇸
@TheEgb18c
4 жыл бұрын
This is a 550 17 turn can that can handle 3s low gearing for low speed crawler
@coreynichol
2 жыл бұрын
@@TheEgb18c i think i might have the same one i dont know exactly wich one it is but i have a redcat racing everest-10 crawler and its motor looks exactly the same
@angelc1243
2 жыл бұрын
Hey I recently bought a slash 1/16 that came with the titan 12t and I rode it in a small muddy puddle and the titan wont start moving or work but it can turn on can you help in any way?
@TheEgb18c
2 жыл бұрын
Sounds like either the ESC or the motor fried. If you bought it brand new and very recently it should still be covered under warranty through text Traxxas
@year1camaro
Жыл бұрын
this is the hard and expensive way to do it.
@owen8538
6 ай бұрын
Hi any idea how we can skim at home
@owen8538
6 ай бұрын
Maf cleaner should be good
@Ultra-Collector
Жыл бұрын
Electric parts cleaner leaves a goo all over everything! Use Nitro motor and karts cleaner!
@Crisinator
4 жыл бұрын
Don't use only wd-40 there will come smoke out. I did it btw
@TheEgb18c
4 жыл бұрын
It will be fine I wait a day or two for the oil soak in properly
@Crisinator
4 жыл бұрын
Gerardo Ortiz so I need 2 wait 2 days and I can ride then
@TheEgb18c
4 жыл бұрын
@@Crisinator I like to wait a few hours to a day , don't use to much wd40
@Crisinator
4 жыл бұрын
Gerardo Ortiz problem i used a lot
@Crisinator
4 жыл бұрын
@@TheEgb18c I only used wd-40 nothing else and a lot of it will I be fine?
Пікірлер: 32