How much did you torque to when putting it back together?
@404notfound.....
Жыл бұрын
Excellent advice, I just did this service. Nice to see it validated!! Your repair videos are 100% !! 👍
@TheSokodelic
9 ай бұрын
Did you have the same make and model?
@johnware1503
Жыл бұрын
This is one of the best DIY videos- and not just car repairs- I've ever seen on the internet. Excellent video quality and instructions. Probably just save me about $150. Thanks!
@ReeaLLme
Жыл бұрын
Great tips and I liked how only important information was explained very well. The start of the engine sounded like a RAM truck starting. 7:03
@style.session.saturday.9488
Жыл бұрын
Lol when he started it, I was like oh yeah 😏 that’s an Elantra, that’s exactly how mine sound when I start it! Lol it’s such a powerful start for a small car 😂😂
@sigifredozepeda
Жыл бұрын
Good stuff brother, just cleaned mine as it was shutting off on me on the road. Thanks for your channel
@jerbsherb4391
6 ай бұрын
shutting off on you? Are you sure it was the throttle body that was the problem?
@robertweekes5783
Жыл бұрын
Disconnect a battery terminal before you start this
@larryyyysterrrd6081
9 ай бұрын
Y
@CedroDidThis
9 ай бұрын
@@larryyyysterrrd6081so u don’t short it by accident
@jamesjohnson5700
8 ай бұрын
Where do the hose to the throttle body connect to?
@Hutchy45445
6 ай бұрын
@@CedroDidThisno because the motor that actuates that flapper/baffle plate will want to close it and it can take your finger off
@mr.cutlass87delgadillo.d45
19 күн бұрын
Great 👍🏼 job and thanks for sharing this video 💯
@rudym415
Жыл бұрын
Hello, I have an Elantra like this and was told that my Idle Air Control System RPM was lower than expected and to replace the Idle air control valve. My car stalls on red lights, should I do this?
@MarkCartieri
Жыл бұрын
Dude was right on the money, from start to finish, awesome video I performed a cleaning yesterday, following the video exactly including the relearning process Runs fantastic btw 2015 with 105k miles
@BT-ei9kc
20 күн бұрын
What you torque the bolts to ?
@mohamadnorsyahmi9284
Жыл бұрын
Hi sir, how about if mine got no push start button to reset because mine is using manual key? Elantra md 1.6, model 2014
@robertweekes5783
Жыл бұрын
Instead of pushing ON twice you turn the key halfway, (don’t crank the ignition)
@donbrewster2304
Жыл бұрын
Great video. great angles on clip you got right to point and did not wander all over the place thanks a lot....don
@jackstichtenoth141
10 күн бұрын
Is this the same procedure for a 2018 Elantra? Relearn process the same also? Thank you
@docmccarthy
Жыл бұрын
Where do you find these data to which you are referring? Torque values, if the gasket needs replacing, how to reprogram the throttle body. Since you are only referring to an Elantra, but you are advertising that the a number of other vehicles can be serviced the same way, there should be data or links to data for these other models. Thanks. And could you please answer the questions in the comments? That would also be a big help.
@BT-ei9kc
20 күн бұрын
Get specs from dealership
@nerycast
Жыл бұрын
No OBD scan, Thank you so much! Great news for this vehicle!
@chopperchiar
Жыл бұрын
Hello, a very interesting video. I can apply this procedure to a 2017 Hyundai Elantra. I am referring especially to programming the opening of the throttle body that you do at the end of the video. greetings
@kobby60841
Жыл бұрын
Excellent video i have a 2014 elantra i need to do that but what button you need to push to resets the car i didn't see what part you push thxs
@Mightybrownie
3 ай бұрын
As he said in the video, just push the ignition start button twice, leave it like that for 10 seconds and then turn off. After that wait 10 seconds and start the car
@HiFiInsider
4 ай бұрын
do you know a good source to get a factory service manual? thank you for the video.
@athenasblueprint
Жыл бұрын
Amazing video. Thanks for giving us good angles and a clear step-by-step as well as explaining the reason for each step. I was going to take my car to a shop but I'm pretty confident I can do this despite my track record of causing bigger problems every time I attempt simple automotive maintenance 🥴
@93aMike
2 ай бұрын
How'd it go??
@omegaman1409
Жыл бұрын
I followed all steps for some reason the p0106 code came up. Never touch the map sensor. I was assuming it was reusing the seal but everything was clean and torque down. I erased it twice so far hasn't come back. Still order the seal just in case.
@michelkeithf
Ай бұрын
any updates on this? it gave me p0106 after cleaning it
@oropezaanthonypillo2
Жыл бұрын
How about if mine doesn't have start stop button.... I have a 2012 basic model
@panike
Жыл бұрын
Then how do you start your engine?
@laggybum3218
Жыл бұрын
Probably a key.
@woodyrichmond6543
10 ай бұрын
Same question. My 2012 just has key start too.
@Fele221
Жыл бұрын
Very professional! Thank you so much!
@owldotmusic
4 ай бұрын
I've got 160k miles on my car, and our pcv systems dirty our intakes bad if you don't have a oil catch can. going to be doing this for sure. great vid.
@graysonwagner1855
Ай бұрын
Disadvantage of GDI motor Might do a upper engine cleaning, since the GDI motor does not keep the valves clean
@VladimirKolombet
3 ай бұрын
Mine is jerking at idle when I have the A/C turned on. Is this a throttle body cleaning fix or no?
@chandramlakhan7102
Ай бұрын
It doesn't look the same on my 2020 Elantra.
@diytheproway782
2 ай бұрын
Does this particular throttle position reset method applies for a 2014 elantra gt GDI also? Awesome video man!
@oldlittlebluejeans
Жыл бұрын
What button you put twice Without pressing a brake?
@laidbackryduckett
Жыл бұрын
Self start botton
@panike
Жыл бұрын
This is only if you have a push-start engine
@MarkCartieri
Жыл бұрын
Push start
@lanyaog7212
Жыл бұрын
Start push
@luisescamilla8169
Жыл бұрын
What if my model doesn't have a self start button?...how does the procedure change?
@deseanrender911
Жыл бұрын
Thanks home slice
@oldlittlebluejeans
Жыл бұрын
I cleaned my throttle body and the engine still has rough idle,.
@laggybum3218
Жыл бұрын
Could be spark plugs or O2 sensor.
@JorgeSanchez-qy9ot
8 күн бұрын
i did just this now. i have a check engine light
@ivanbeltran87
10 ай бұрын
Error codes I received where indicating a problem with either throttle body or accelerator pedal, after replacing both. Found the issue to be liquid getting into ECU and shorting out. Creating check engine light codes and limp mode. I recommend checking ECU first. Prior changing out throttle body. Might suve you hundreds $$$.
@phoenixMaxxOnShop
Жыл бұрын
Thank you dial2fast for making this video
@stevenweiss2148
Жыл бұрын
EXCELLENT VIDEO. REMOVING THE THROTTLE BODY WAS UNNECESSARY AS I SEE IT. IT WAS CLEAN AS A WHISTLE AFTER CLEANING IT WITH THROTTLE BODY CLEANER. ONCE MORE MY ELANTRA HAS A RUBBER O RING ON THE BACK OF THE THROTTLE BODY. I CHOSE NOT TO OPEN A CAN OF WORMS. DECIDE FOR YOURSELFS.
@BT-ei9kc
20 күн бұрын
Just replace the ring it shouldn't cost more than 20 dollars don't cheap out
@johnnicastro5931
2 ай бұрын
I have a 2011 elantra touring with the 2 litre. Would the process for cleaning as well as reprogramming be the same. Thanks man, great video.
@gavin7715
4 ай бұрын
Will this work for 2017 Kia forte? it’s pretty much same engine
@nordicpride9708
8 ай бұрын
The main reason for idle recalibration is the fact you just cleaned the carbon which changes throttle position. I’ve heard so many morons on KZitem act like moving the throttle blade upon cleaning it changes its position which is false.
@ginajulen3436
7 ай бұрын
Do you have to remove it to clean? My car is delaying to start i serviced and changed everything including the sparkplugs and still does it.. maybe oil pressure? Idk what to do
@richardfrazier2459
2 ай бұрын
Great video!! Does the relearn procedure apply to a 2013 Elantra GT?
@Ahmad_Sya
Жыл бұрын
If my car before this idle at 600~700rpm, but now at 900.. could this be the cause?
@drbelt87
6 ай бұрын
This is probably what makes my car feel like its not getting gas and my RPM goes up and then a tad bit below the 1RMP
@Verónica-n8p
8 ай бұрын
The rest button on the steering wheel of my 2013 hyundai elantra limited is not working. Could it be a fuse?
@Becontented
7 ай бұрын
Good day Sir, do you know how to do the resetting for Hyundai Accent 2015?
@dallasadakai5744
Жыл бұрын
Will the relearn process work with a new throttle body replace?
@dial2fast
Жыл бұрын
For this generation of vehicle, the answer is yes.
@leoquin198
Жыл бұрын
I have a Tucson 2017, for a few days now when. I take my foot off the gas pedal is stays accelerated, recommendations? Have an appointment scheduled with the dealership on the 19th but this feels dangerous to drive
@mr.janjasmin5235
Ай бұрын
You said to do this service every 40 or 50,000 miles. What about if your car has slightly more than 100,000 miles on it? Do you do this sooner?
@dial2fast
Ай бұрын
It's never too late to do this service. If you don't think it's been done for a long time, then you can do it now.
@mr.janjasmin5235
Ай бұрын
@@dial2fast Thanks, but that's not what I asked. I had this service done an hour ago, but wanted to know if I should check this sooner than 40,000 or 50,000 miles. Sorry, if my original question was unclear. Hope I rephrased it adequately.
@johnnym6062
9 ай бұрын
For the reset.....Turn key for 10 seconds, wait 10 seconds, then start the car. Do you have to start it after 10 seconds to make it work, or can you come back later and start the car?
@christianmartin9035
24 күн бұрын
Great video... just one question. What do you do when having a power button instead of a regular key?
@BT-ei9kc
20 күн бұрын
Same thing
@BT-ei9kc
20 күн бұрын
Just don't press on the brake so car won't start then press the button to turn off the whole dash
@artina.i5069
9 ай бұрын
This will damage the gas valve. One person should open the switch and push the gas pedal to the end, and another person should clean the gas valve.
@kootahmed5224
Ай бұрын
🎉
@peterrober12
Жыл бұрын
Friend, can you help me in part is the acceleration sensor I don't want to change everything only in the TPS sensor BUT I DON'T KNOW PART OF IT IS LOCATED MAYBE YOU CAN HELP ME THANKS
@pankajrajput6239
6 ай бұрын
How to reprogram throttle body position on car which have key start not push button start
@genericusername1365
10 ай бұрын
Is it the same procedure for a 2008 Sonata NF with the 3.3 V6?
@christenw.1726
4 ай бұрын
Does this work for Hyundai Azera?
@docmccarthy
Жыл бұрын
Does the cleaning work on a 2014 Sonata Turbo 2.0L? It would be helpful to know the generation years for the vehicles you are referring to. Thx.
@stevenweiss2148
Жыл бұрын
Excellent. Thank you.
@netjet305
6 ай бұрын
Will this work on a Hyundai Kona 2018?
@jeremiahmlc8523
Ай бұрын
Good day. I'm trying to do this project. Is the torque wrench necessary?
@jeremiahmlc8523
Ай бұрын
because I dont have any
@dial2fast
Ай бұрын
@@jeremiahmlc8523 If you are not experienced with working on cars, there is the problem of not knowing how tight a bolt should be. You can overtighten or under-tighten the bolt. With this job, you can give it a try, but if you think you will be servicing your own car for a long time, then invest in some tools. Also tools have gotten really affordable in the past 15 years with more manufacturers from China. I still remember buying a torque wrench for $200 many years ago. Now you can get one on Amazon for $40.
@claddagh1000
4 ай бұрын
I cleaned mine and moved the throttle plate, which gave me a check engine light. All I did was clear it.
@angelonovaes6308
6 ай бұрын
Porque não tirou e limpou fora do carro? Só tirar a mangueira e soltar o conector!
@dougdrefus4274
10 ай бұрын
Do it attached to the engine with a toothbrush and toothpaste -I mean with throttle body cleaner
@alfredobanchon6760
3 ай бұрын
How can I know what newton pound notes is in a 2017 hyundai tucson?
@joselitohernandez8297
Жыл бұрын
Sir how to reset the ECU in proper way thank you and god bless im from the Philippines
@waltp3373
Жыл бұрын
Great concise video. I would use a 1/4" torque wrench for the bolts since low settings on 3/8" wrenches are usually not very accurate. That would be 70 to 104 inch lbs.
@mizzglamity56
11 ай бұрын
The bolts are for a 2015 hyundai elantra se
@troyhenry3267
Жыл бұрын
Dial, can you do a video on how to perform a intake valve cleaning on the Santa Fe and the Accord V6 2010?
@spaycemagic3383
Жыл бұрын
Will this work on 2013 Elantra Coupe?
@troyhenry3267
7 ай бұрын
Dial, Question: I have a 2.4L santa fe sport. With 98k miles. I need to do this procedure, but while cleaning throttle body, would this be good time now to perform a intake valve carbon cleaning as well since I am opening up the throttle body and do that too? Thoughts?
@dial2fast
7 ай бұрын
I have not done the valve cleaning service before, but if you are thinking of using a product that sprays into the intake to clean the valves, then this can be a good time to do the service.
@alfredohernandez1978
11 ай бұрын
I have a 2018 tucson is the same procedure to re program the throttle?
@troyhenry3267
Жыл бұрын
CAN you do a video on this vehicle on how to perform a valve intake cleaning using CRC intake valve GDI cleaner spray.? and best place to access the valves via vacuum hose, or intake manifold? I have 2016 Santa Fe Sport 2.4L.
@dial2fast
Жыл бұрын
Sorry but I sold this car earlier in the year.
@mizzglamity56
11 ай бұрын
Hi what size and where can i get the bolts for the electronic throttle body? Very informative video by the way.
@todoslosmemes236
10 ай бұрын
Does a 2016 1.8L fits a 2011 Elantra?
@SCHARKBAIT11
4 ай бұрын
GREAT VIDEO! question at 1:19 that hose you disconnect.. once i did that it was leaking a little something... is that bad?
@dial2fast
4 ай бұрын
It's a air breather hose, there shouldn't be any liquid. I wouldn't worry about it, it might be just some condensation. Just wipe it with a towel.
@artina.i5069
9 ай бұрын
The gas valve should not be opened by hand
@NDG7583
7 ай бұрын
Hi thank you for sharing this video. I have Hyundai accent 1.6 2022..........do you think is the same method?
@BT-ei9kc
20 күн бұрын
You can get the info at the parts department at dealership just ask for the specs on throttle body torque specs
@ZunzuGuerra
2 ай бұрын
What button you push twice?
@MATIKKMUZIK101
Жыл бұрын
What is the u shaped tube on top of intake hose, does it come with hose if replacing? Mine has a small crack in it.
@François-n7b
4 ай бұрын
Thanks for the help my friend!!
@owldotmusic
4 ай бұрын
This vid better than the one that has 1.3m views
@troyhenry3267
11 ай бұрын
Dial, does this model have a MAF or MAP sensor? If so, is it recommended to remove and clean it with a MAF cleaner??
@dial2fast
11 ай бұрын
AFAIK it's a MAP sensor for this model year. I did not clean mine but you can as long as you use the correct MAP sensor cleaner.
@WanderingHewitts
Жыл бұрын
I have a 2017 forte with the 2.0 GDI. I cleaned the throttle body and moved thr plate not knowing about the reset. It seems to run perfectly fine and have put about 100 miles on it since.. Do you know if this engine needs to do the reset, or did i screw it up?
@dial2fast
Жыл бұрын
The idle reset/relearn is only for the idle speed. If you are not having any erratic idle speed when the car is idling, then you are fine. If there is a problem with the idle, you'd definitely notice it as the RPM will surge and drop during idle.
@WanderingHewitts
Жыл бұрын
@@dial2fast idle seems smooth at just under 800rpms. I think I lucked out and hopefully ( knock on wood) didn't damage anything.
@dial2fast
Жыл бұрын
@@WanderingHewitts Don't worry, nothing is damaged.
@sunilsamant1376
Жыл бұрын
Does the same applies to hyundai i30. Thanks
@edwardgonzalez6572
Жыл бұрын
How if I don't have a start button.
@T2P661
Жыл бұрын
I have a 2017 Hyundai Elantra limited and I been having stalling issues everytime I drive, can I still do the same procedures you did in the video?
@Santiknws23
11 ай бұрын
Did you do it? And did you feel a difference after?
@josephnguyen9504
Жыл бұрын
Just wonder have you done on 2013 Pathfinder or Infiniti QX60?
@dial2fast
Жыл бұрын
I have not had to do this service on the Pathfinder.
@studio20seven
11 ай бұрын
Do i need to drain the coolant if im swapping the whole throttle body?
@dial2fast
11 ай бұрын
Just pinch off the lines and do the swap. The little bit of air that gets in should bleed out through the radiator cap.
@InnovationTree
Жыл бұрын
How come the hose doesn’t get cleaned?
@style.session.saturday.9488
Жыл бұрын
How much do you charge someone for this specific service?
@docmccarthy
Жыл бұрын
Hyundai charges around $170.
@YamahaVirago1994
9 ай бұрын
Greattttt video
@end-timezzz2649
Жыл бұрын
What if the idle is erratic when the ac is on
@techtraveler4421
2 ай бұрын
Thank you!
@dukelakk
Жыл бұрын
the relearning process is for all sensors?? steering wheel too ?
@dial2fast
Жыл бұрын
No
@user-oq9cu5jj3y
Жыл бұрын
What make of torque wrench are you using and is it 3/8 or half inch
@dial2fast
Жыл бұрын
I am using a 3/8" drive torque wrench which I bought 30 years ago. You can't buy that one anymore, but here is one on Amazon you can take a look: amzn.to/3KqS6Ml
@jayponce682
11 ай бұрын
Thank you very much.
@TheSokodelic
11 ай бұрын
Dude! Likes and subscribed! Question though: I have a '16 Sonata 2.4. Would you know if the relearn procedure would be exactly the same?
@dial2fast
11 ай бұрын
I am not 100% sure, but it appears the new design of the 2015 Sonata carried over the same 2.4L engine from previous gen. So this procedure should apply.
@TheSokodelic
11 ай бұрын
@@dial2fast okay man. I really appreciate you're rapid response. If the relearn fails, do you think it'd be safe enough to drive for a little while, to get to a mechanic?
@dial2fast
11 ай бұрын
You should first try to google the idle relearn procedure for your car. There may be info on the net that can help. Some newer vehicles can have the relearn done with a OBD scan tool. So yes, a proper mechanic can do that.
@TheSokodelic
11 ай бұрын
Man, can't find anything on the web that exactly tells me how to do the relearn. Your video is the closest/best thing. Bought a foxwell nt530 scan tool, but they removed the "special function" option in the software that allows you to do a relearn for TB. Only lets you open and close the TB, thats it. Thanks anyways man.
@manueljohn1458
Жыл бұрын
👍👍...✌️.
@SniperUSMC
Жыл бұрын
Thanks, great video. I was wondering why when my car idles it sometimes stalls. It seems to idle around 800 rpm. One other video stated that when driving the rpms jumps almost like the transmission is slipping and cleaningbthe throttle body fixes that too. Your thoughts on that?
@dial2fast
Жыл бұрын
Dirty throttle plate usually causes issues during idle, not when driving. If it's a transmission issue, you will feel the slow shift or hard shift while driving.
@sugarshane7131
10 ай бұрын
@dial2fast Is is absolutely necessary to use a torque wrench?
@lanceozom
Жыл бұрын
Thank you buddy for this video, just want to clarify which press should I do during the reset of idle? I didnt see anything you press while resetting the idle
@MarkCartieri
Жыл бұрын
He has a key start, he briefly mentioned if you have a push start vehicle
@woodyrichmond6543
10 ай бұрын
Any idea if you don’t have button starter?
@Zaini-hf3nd
9 ай бұрын
Tq ..good info
@dgoode2846
11 ай бұрын
Excellent video 👍
@geraldoibarrabaeza7257
11 ай бұрын
Good job
@Kimlikestacooo
5 ай бұрын
Coming from someone who only knows how to change air filters and rotate tires, this video was great! I have a 2018 hyundai sonata that had jumping rpms, sometimes a long start then just started to stall while in park. After doing some research I found your video. It was extremely easy to do and saved me 100s of dollars!!! I spent about 18 on the cleaner and 18 on the torque wrench, and my car runs great!!!! Took me about 45 mins from start to finish. But now that I know how to do it could probably only take 20-30 next time. Thank you for this video it helped so much!!! To anyone who's skeptical. You can do it!!! Just follow his video step by step!!!🎉🎉
@dial2fast
5 ай бұрын
Really appreciate you taking the time to leave your experience on doing this service on your own car. Good to hear you were able to do this yourself. Have a wonderful week!
Пікірлер: 180