Terrific video! Easy to follow and exactly what I needed! Thank you.
@timhoward7556
3 жыл бұрын
I recently had to repair one of these. I noticed that the wrap-around front bumper section was full of compacted muck, which was enough to affect the operation of the sensors. Result was the robot hitting furniture hard. The bumper is removed by a number of small screws on the bottom.
@icanfixit6650
3 жыл бұрын
Thanks for letting us know !!
@darneljonesjr7325
Ай бұрын
Thank you I was stuck for months on the last part 😅
@icanfixit6650
3 жыл бұрын
👇 SUBSCRIBE TO ICanFixIt KZitem CHANNEL NOW 👇 kzitem.info/rock/QAzt1IuH5cTjAXWA04hV3g
@aurelius6000
3 жыл бұрын
Thank you. If I do half what you did I will have improved as a result of watching.
@icanfixit6650
3 жыл бұрын
Great to hear thanks for watching!
@amyarahill4829
2 ай бұрын
Thank you! Great video!
@aurelius6000
3 жыл бұрын
Would be easier to follow without the music.
@madlenshammas6481
2 ай бұрын
I got a used I robot from a friend.. I downloaded the i robot app. I just want to ask if it does draw a map of the rooms? Like the roborock vacuum ? Or it doesn't support this option ? How would i know the areas that it cleaned ? Also wn I press the home button , it doesn't go back home .. wts the problem ?
@michaelamador8348
2 жыл бұрын
Excellent Video!
@devezencuando9866M.Amuedo
2 жыл бұрын
Muy bien explicado.Gracias
@LunaSimtea
2 жыл бұрын
AWESOME VIDEO!! THANKS SO MUCH!!!
@AH-bm4ts
3 жыл бұрын
I just bought from Sam's club on sale $199.98
@fredestair7360
3 жыл бұрын
I wish I didn’t see your comment cause I just bought it from Sam’s the other day for more $.
@yb8030
2 жыл бұрын
Tnk ❤
@Consuelo728
2 жыл бұрын
I can’t seem to reinstall the second brush. Is there supposed to be a gray plastic cap on the end on the right side. It’s like it’s too long to go back in.
@icanfixit6650
2 жыл бұрын
yes each one of the main brushes need to have a gray plastic try to make sure this plastic fit till the end and make sure you putting the brush at the right side it wont fit in both sides
@june81917
3 жыл бұрын
fabulous!!!!thank you!
@icanfixit6650
3 жыл бұрын
Thank you for watching the video
@cata1655
3 жыл бұрын
Thank-you! Very thorough video!
@icanfixit6650
3 жыл бұрын
Thank you for watching !
@barbarasymonds5047
2 жыл бұрын
Thanks very helpful!
@MariaCarvalho-bd3pn
4 ай бұрын
Pode sêr traduzido em Português? 4:56 4:59
@luzroman7178
3 жыл бұрын
My Roomba makes alot of noise when its cleaning.
@icanfixit6650
3 жыл бұрын
Hey thanks for watching make sure you don't have something stuck on your main brush rollers its the number 1 reason for noises around the Irobot.
@alikoxxx
3 жыл бұрын
thanks!
@icanfixit6650
3 жыл бұрын
Thank you for watching !
@mathewhunt81
2 жыл бұрын
another great video! thanks !
@scottsmith4315
3 жыл бұрын
Well done. Thank you. I was doing everything except washing the rollers with soapy water. Great tip! Have a great day!
@icanfixit6650
3 жыл бұрын
I'm very glad to hear, now just keep persisting with thos cleaning methods and your IRobot wont stuck at all. Thanks for watching
@BMMEC2009
7 ай бұрын
Great video. The brushes have soft foam tubes inside them. I took my brushes completely apart by sliding the center rail of each brush out completely. It's a bit hard but they come out. Soaking the brushes in water just traps moisture inside the foam. I have a self emptying charging station and if any water gets into it it will destroy the motor. So once they are completely apart you can let the pieces dry for a few hours and it goes back together and works fine.
@evelynlopez3353
2 жыл бұрын
I cannot get the 2nd roller in! It doesn’t fit. It’s too long. But it can’t be, right?! I’m pushing the one end, trying to get the other end to simply settle in its place & latch it closes. I didn’t lose any spring, -_-
@Almycu
2 ай бұрын
Great! Thanks
@timyassa4343
2 жыл бұрын
Wasn't able to unscrew the side brush. Screw was on there tight! Appreciate the video!!
@icanfixit6650
2 жыл бұрын
The first screw spin is the hardest try to hold one of the side brush arms and then open the screw and try to do it with flat screw that have the same size of the screw it will be easier
@TechforSenior
3 жыл бұрын
Great video... Thanks
@icanfixit6650
3 жыл бұрын
Thank you for watching
@devezencuando9866M.Amuedo
2 жыл бұрын
Muy didáctico,súper bien explicado.Gracias
@ernieforcella7930
3 жыл бұрын
Great demonstration
@icanfixit6650
3 жыл бұрын
Thank you for watching
@geoffreybraden3239
3 жыл бұрын
Great video. Well done
@icanfixit6650
3 жыл бұрын
Thank you i'm glad you enjoyed it
@fredestair7360
3 жыл бұрын
How often to you need to replace the filters? Great video ty!
@icanfixit6650
3 жыл бұрын
Hey bobbi slavin first thanks for watching the video. the Irobot manufacturer recommend to replace to a new filter every 2 months. I have 2 dogs with a lot of fur so I replace the filter every month.
@fredestair7360
3 жыл бұрын
@@icanfixit6650 thanks for the quick reply. No dogs here, lol. So once a month sounds ok.
@irakmarin4911
2 жыл бұрын
The filter material allows you to clean it with compressed air, you don't need to replace it as soon.. maybe every 5-6 months.
@fredestair7360
2 жыл бұрын
@@irakmarin4911 ty
@carolslack7081
2 жыл бұрын
Where do I set the timer for when I want it to run.
Пікірлер: 50