Men lifters that are good should not let the oil go out of them because it's a one way valve in the lifters... When they are soft that means this valve is no longer doing his job and that's the reason you hear ticking.... Because the lifter collapse when the cam hit the valve open and the oil go out. The tick noise come from the lifter piston bottom out inside the lifter body. When you clean the gunkd lifters it basically restore the one way valve function and the lifter get filed up with the engine oil pressure and don't let it go out anymore (the oil go out slowly with the time). If it still make noise after cleaning your noisy lifters one way valve are dead. To properly re install and check the lifters you should press them firmly with your fingers to insert the piston fully and at the same time using a oiler bottle to squirt oil inside the lifter trough the side hole. If the lifter piston get extended and the lifter stay hard and no oil flow out from the hole when you hardly press the piston then it's a good lifter. Lifters should stay hard when full of oil or the valve do not open fully.
@mkrp4
10 ай бұрын
Thanks for bringing this up. Many people have superficial knowledge about HLA (lifters) yet appear to be "the experts".
@sharkeedetox8579
Жыл бұрын
Yo I just searched this I didnt even know you had this video! Keep er goin man thank you 🤙
@stevenanderson5355
8 ай бұрын
Could you make a video explaining how to number the parts
@JoseSandoval-ic5xe
6 ай бұрын
Hi did you notice your car run better after doing this?
@mkrp4
9 ай бұрын
It's not necessary to take out entire timing belt just make sure it stays engaged with crank pulley teeth: kzitem.info/news/bejne/u2acyp6vs516maAsi=mqQ86ATD7k8nk4vw
Пікірлер: 6