I just bought my recharge kit for $12.99 at reileys auto parts..its not $35...and your suppose to rinse with bad side down first to get grim off..just saying..but good video..
@jspeedracing
6 жыл бұрын
robert vanhevel You're right, I absolutely forgot about rinsing opposite direction of airflow. Thanks for the info. Have a good one, and don't forget to sub.
@Pahrump
6 жыл бұрын
robert vanhevel what's a "grim"?
@motorvidz101
6 жыл бұрын
grim ɡrɪm/Submit adjective 1. very serious or gloomy. "his grim expression" synonyms: stern, forbidding, uninviting, unapproachable, aloof, distant; More 2. (especially of a place) unattractive or forbidding. "rows of grim, dark housing developments" synonyms: bleak, dreary, dismal, dingy,
@dylanm3519
5 жыл бұрын
I just got the same K&N recharge kit for about $13 or $14 here in Canada.
@keysersoze716
5 жыл бұрын
@@dylanm3519 Can you get me some Puppers?
@richarddiggins8158
Жыл бұрын
This is a classic case of "a litte learning is a dangerous thing". As others have noted, NEVER rinse a filter from dirty side - that only helps to push dirt into the filter then possibly the engine, if those particles arent thoroughly rinsed out. Also, WD-40 is a crappy lube because it contains petroleum distillates which are a solvent. Others have suggested using heavy motor oil, ATF or even vegetable oils.
@Lehmann108
5 жыл бұрын
A few corrections. Wash from clean side out so you are not forcing particles from the dirty side into the clean side. NEVER use WD-40 as a lubricant. It is for displacing water only. You need to have oil on the filter. Your filter will be completely dry in about two days. It should not be run this way.
@giveme10feet
Жыл бұрын
😂😆😂!
@michaelj.carmona2101
3 жыл бұрын
Thanks for the video, you've convinced me to buy an OEM one and just dispose of it when its dirty.
@stephenmartinez1
3 жыл бұрын
I totally agree on going paper air filters, but you should definitely consider the KN cabin air filter, I absolutely love mine, it's been in use about 3 years now. the oil in the recharge kit goes a long way and is good for well over 10+ application/recharges done every 6 months. I got mine when I was at the store for a cabin air filter, I saw the cheapest one was a $27 paper one- so i went with the $40 KN one. It works well too, last time i cleaned mine the water ran black after only 6 months.
@diamondmask7704
3 жыл бұрын
If you let the Simple Green sit for a while, wouldn't you get more grime out? Thanks for the video. I was JUST looking to buy the K&N cleaner and wondered if any other cleaner would work. Glad I came here.
@tucobenedicto1780
3 жыл бұрын
Forget all the haters and K&N simps. This is a helpful video.
@xephael3485
3 жыл бұрын
Simps 😂yep or kucks
@MPBADASS90
3 жыл бұрын
You MGT0W bro? 😳😳😳😳
@xephael3485
3 жыл бұрын
@@MPBADASS90 I'm not, but they've got good points. Drex on Rekieta Law makes lots of good commentary.
@MPBADASS90
3 жыл бұрын
@@xephael3485 I'm MGT0W Pump and Dump for life. I'm a bachelor who owns a 4 bedroom house by myself with 2 incomes. Just me and my 🐕🦺🐕🦺🐕🦺🐕🦺. No wife extremely happy life 😎😎😎😎🍻.
@davidvandermeir5969
3 күн бұрын
Helpful HOW? Bu telling you to use WD40 instead of something that will actually work?
@jamessutherland5107
3 жыл бұрын
Check your house pressure. That hammering when you turn your faucet off could mean your 25AUB at the water meter has failed, and youre getting dangerous pressure into the house.
@northsneads3662
Жыл бұрын
It's water hammer. You Should have water hammer arrestor installed.
@motorhead3153
3 жыл бұрын
I would use orange agent cleaner and then spray some silicone Tyre shine on the dirty side of the filter to catch all the dust
@jspeedracing
3 жыл бұрын
motorhead ok bet 😂
@timothysurface2417
4 жыл бұрын
Good video but don't use wd40 with silicone in as the maf unit will burn out. I burnt out 2 before. Now I use ATF AND IT WORKS WELL WITH NO MORE CODES COMING UP.
@siegethompson3194
2 жыл бұрын
Automatic transmission fluid?
@j.howardj
4 жыл бұрын
I tried to clean my tires with Simple Green once. Sprayed them down really good and scrubbed hard with a brush. I didn't see hardly any dirt coming off and the tires were still dirty. So I got some Super Clean. I sprayed some on the tires with the foaming spray bottle and what do you know, dirt started to come off the tire EVEN WITHOUT using a brush. So my conclusion is Simple Green is a VERY WEAK cleaner/degreaser compared to Super Clean, at least when it comes to dirt on tires.
@baneoffsight4871
4 жыл бұрын
Wow the comments are brutal! Impressed by your humble attitude sir. Still, I would do things differently, but you already knew that XD
@BasikVids_4_Life
4 жыл бұрын
For $10 I'll stick with the kit. Free shipping on prime also 😉
@Isaiahfraustoo
3 жыл бұрын
Where I’m getting mine 😏
@mathiaswallgren6307
6 ай бұрын
I wonder if fish oil that comes in a spray can (used for rust prevention etc.) would be a good choice for oiling the filter? Thoughts?
@darrellmcquay9808
Жыл бұрын
Cleaned mine with old gas I had laying around and recharged it some some 2 cycle oil I also had in the garage
@fredfodness-qd2yu
Жыл бұрын
I didn't want to run into town and get the Kit I figured there was a good way to do it without it thanks
@nukulkiatsombatsiri7893
3 жыл бұрын
1 Water before 2 not enough cleaner 3 not enough time to brake down oil before rinse 4 rinse with pressure 5 not let it dry before oil 6 wrong type of cleaner for cotton with oil 7 wrong type of oil to stay on filter and to catch dust 8 apply WD-40 wrong way to fast not touch up 9 everything was wrong 10 even more I didn’t catch (just don’t do this) WD-40 will not stay on air filter and wii suck the oil pass sensitive mass air flow will make bad gas mileage Nothing terrible bad but everything was wrong
@Sweet68Camaro
6 жыл бұрын
Bro!! There is no way I'm using this method. I have a 68 Camaro with a carb, no fuel injection. One little back fire and my air cleaner is a roasted marshmallow. LOL.
@jspeedracing
6 жыл бұрын
Sweet68Camaro Haha up to you man. Just what i did on the fly. I’d probably now just buy the kit. They’ve come down in price
@ArmenArmenjs
6 жыл бұрын
Bad idea starting at :38. inside out always, How is your MPG
@stephenmartinez1
3 жыл бұрын
who cares which way it is rinsed? if you're using something like super clean or simply green you are not going to be cheap with your spray- it will get all the dirt out no matter what side it is on. you see the water running clear so what makes you think there is still dirt inside that will somehow make it into your engine?
@eee3400
3 жыл бұрын
K&N has 2 versions of the filter oil: 99-5000EU (international market) & 99-5000 (for US market). MSDS says 99-5000EU contains non-hazardous mineral oils, 99-5000 contains carcinogenic petroleum distillates. So K&N is peddling toxic substances while it's already got safe alternatives.
@darrendigiacomo6889
Жыл бұрын
I’m sure the US just has a different opinion than europe of what a carcinogen is. They are prob the same product.
@TraviesoLoco
Жыл бұрын
I thought it was Hank Hill talking on the video. I swore he was gonn say use propane to clean the filter 😂😂😂
@DeepRightRecords
6 жыл бұрын
This is the perfect way to ruin your filter.
@hafeezkhaliq7776
5 жыл бұрын
he washed dirty side in. NOT OUT!!
@kiyoponnn
4 жыл бұрын
@stangmaster 2 Please expound on why it's better. I've always thought that spraying water in the opposite direction of airflow is better
@mattleonard5268
2 жыл бұрын
Then I have ruined my air filters many times over.
@derkaderkastan420
2 жыл бұрын
The oil is probably what he meant. wd 40 isn’t great for this at all. The amount of dirt it will deposit is insane. K&n oil is probably the best for not permanently trapping grit in the filter. I ruined one years ago using it. As far as simple green goes it’s perfect but only on the dirty side.
@giveme10feet
2 жыл бұрын
@@derkaderkastan420 Any suggestion on adequate oil that doesn't pose a breathing hazard?
@psychosav8712
4 жыл бұрын
Bro lol nahh your doing the viewers a disservice with this video 🤣
@cornfusedatbest6693
7 жыл бұрын
Is that WD 40 the silicone based type? Been all over the web, and most say not to use WD 40. I was reading a post in some forum that said ATF had been used by drag racers in the past with no ill effects. Appreciate your thoughts on this subject. I find it hard to believe that only K&N oil can be used. PEACE
@anders949494
7 жыл бұрын
the kit is cheap, just do it the right way and dont risk destroying the MAF sensor that cost A LOT.
@cornfusedatbest6693
7 жыл бұрын
Thanx for the input. I just bought this truck, and checking fluids, doing routine maintenance I found it has a K&N filter. I've never used this type of air filter (oiled) except on a lawn mower. As for the Mass Air Flow, and other sensors, I check to see what they look like weekly. Yup, I'm pretty obsessive.
@cornfusedatbest6693
7 жыл бұрын
.... WTF??!!
@CycloneCyd
5 жыл бұрын
It's not so much that ONLY K&N oil can be used. More that you should use the CORRECT oil, rather than just any old oil. Since K&N don't tell us what the tech specs of the oil are, then we cannot know what we COULD use as a correct alternative. Thus, any suggestions for alternatives are mere guesswork and may or may not be any good. A bottle of K&N oil lasts for loads of cleans and so works out cheap enough I'm not gonna starve, so I'm sticking with it.
@cebolla012
6 жыл бұрын
You are pouring the water the wrong way
@hafeezkhaliq7776
5 жыл бұрын
i just told him
@dodjer
5 жыл бұрын
Any specific WD40 product you use?....there's lots of different ones.
@xephael3485
3 жыл бұрын
WD-40 K&N special edition
@beauhatman4395
5 жыл бұрын
hahahaha, yeah, most of the comments are spot on. why not just use a pressure washer? this dude is NUTS! or maybe he likes buying new k&n filters (or engines) all the time lol
@jspeedracing
5 жыл бұрын
Im just here for a good time
@andresteinhauer2503
2 жыл бұрын
Great tip
@bandcguitars3124
4 жыл бұрын
I thought the smell of "Green" brand air filter cleaner smelled familiar, so I went and took a whiff of simple green. I'm pretty sure it's the same thing they sell you for $17, although you do get the green oil.
@mr.rodriguez3908
4 жыл бұрын
Wow, that was legit. I prefer to use non ethanol gasoline and organic olive oil. For hard to clean spots I just lightly spray it with a pressure washer. 😆
@eterno4671
6 ай бұрын
Gracias fiera !
@devinthomas4866
3 жыл бұрын
I think you were rinsing the wrong direction
@sasstewart1222
2 жыл бұрын
Yikes, this is not the way to do it. buy the K&N recharge kit for $14 and only rinse from the clean to dirty side. He did it WRONG.
@fike301
3 ай бұрын
Better off using used motor oil….If your not going to do it right 😮😮😮
@Hikerhikeshikes19
5 жыл бұрын
Besides the incorrect cleaning procedure, this just seems like a bad idea. I don't mind spending 12-15 bucks on a product for peace of mind when performing any kind of maintenance on my vehicle. But hey, to each their own.
@sphinx5101
Жыл бұрын
Is this a joke simple green is fine for it but wd40
@mpc6879
3 жыл бұрын
No
@TheModifiedLife
5 жыл бұрын
Sounds like you need a hammer arrestor on that faucet
@KevinBaird75
3 жыл бұрын
Is it important to allow the filter to dry completely after the WD40 step?
@JayJohnson-qq2qw
3 жыл бұрын
DON'T DO ANY OF THIS!!!! The kit is cheaper than he says and there is a reason they want you to clean the filters a certain way! This is a good way to ruin your filter and harm your engine.
@boostedlss731
4 жыл бұрын
Just google K&N recharge kit instructions, this is ridiculous.
@ck3561
3 жыл бұрын
Quick update guys my jeep blew up totally unrelated….
@Cjone1981
6 жыл бұрын
Hahahahah poor car
@Theunbelievabletruth489
Жыл бұрын
YO HOW BOUT JUST BUY A NEW ONE ! NOT WORTH THE TROUBLE ! PERIOD
@melvinjaniola2784
2 жыл бұрын
relax asians its just a typical foreigners fast work wrong
@jspeedracing
2 жыл бұрын
Flamed
@Izzy-qi3hi
6 жыл бұрын
Dude you have to be kidding me.Your engine light must stay lit
@gettingpast4391
5 жыл бұрын
I think I'd use ATF in a spray bottle instead of WD40
@Dizzyphan
3 жыл бұрын
I just did mine and used both the K&N cleaner at first but then filled an empty old pool chlorine bucket with water and Dawn dish soap. Let the filter soak for almost an hour with also swishing the filter back/forth for the soapy water to flow through. Just by soaking the old pink oil came to the surface, dirt to the bottom. Then thoroughly rinsed with kitchen faucet and sprayer, and placed on some paper towels to air dry. After dried used the oil on the bottom side where the air comes in and used a lighter coat this time. Last time I'd oiled both sides heavily and it cost me to have a shop clean my intake and throttle body of the black gunk from the excess oil I used from before.
@asifalimirza
5 жыл бұрын
Um, I hate to break it to you, but WD40 is a water displacement agent. When it dries, your filter will be drier than a bone. The recharge kit is like $12 on Amazon. Plus, you should not rinse it from the bottom.....anyways
@gettingpast4391
5 жыл бұрын
He's not using standard WD-40. Thats the rust penetrant version which leaves oil. Well, according to marketing lol.
@alanw5812
5 жыл бұрын
K&n recharge kit not that expensive
@RudeDoggGomez
4 жыл бұрын
The filter should’ve had a few minutes for the Simple Green to melt the grease, before rinsing. The filter should’ve been flushed in the opposite direction of the airflow ; from the engine side out towards the intake side. Oiling after Drying thoroughly : WD 40 isn’t going to last long because it’s a penetrant, not a lubricating oil which is formulated to hold on to parts. WD 40 is intended to migrate. Lubricant oil is intended to hang on. I’m not yet sure which oil I will use on my cleanable filter. I think I’m going to find a method to use regular motor oil. But, there is a spray oil manufactured by 3 in 1. I think that will be too light of an oil to last well, but maybe open the filter box periodically and give the filter a fresh dampening of spray oil. That seems good to me .
@stephenmartinez1
3 жыл бұрын
I definitely would not substitute the oil. yes, we all know the cleaner is probably no different than your super cleans. the oil however is critical to the actual functioning of the filter- i would use the official oil. I use kn cabin air filter, i love it btw, but the oil in the kit is good for well over 10+ applications maybe more. you only need about 15 squirts of the oil and the bottle is not small for how its used.
@mattkenney2637
3 жыл бұрын
Cleaning this way is fine. Cleaned from engine side towards airbox side first, correct. Light spray from other side, no biggie. Like everyone else commenting, I'm not an expert, but the WD-40 makes me slightly nervous.
@eddiepizana7637
4 жыл бұрын
Well guess I’ll just put my filter in the washer with some Tide and put in the drier with Downy drier sheets.
@psychosav8712
4 жыл бұрын
Gear_Head_Garage 🤣🤣🤣
@Jeminitim
4 жыл бұрын
here you go kzitem.info/news/bejne/yH6it4h4sIWApHo
@MrPrios1
5 жыл бұрын
That is stupid, adding oil to the back side can damage your MAF sensor. No telling what WD40 will do to it when it makes it to the sensor. I would delete this video.
@premium8081
5 жыл бұрын
MrPrios1 so u mean u should not add wd-40?
@naula7
4 жыл бұрын
@@premium8081 - He added WD-40 to both sides of this filter. A BIG NO NO! The top of filter should NEVER be oiled. The oil could effect MAF Sensor, throttle body, etc. Just buy a air filter cleaning kit, ($12), and look for official K&N video here on KZitem. It's worth doing things the right way. This video should be deleted, it's so pathetically WRONG!!
@thurm101
5 жыл бұрын
Now I do use household products to clean it. I soak mine in a degreaser for about a hour. Then I sit in on the deck for about a hour to let in dry in the sun. Then I use the oil in my K&N kit. DONE. Been using K&N for years no problem. Well a few days after clean I clean my mess air flow sensor.
@mikopaq
Жыл бұрын
This is exactly HOW NOT TO RECHARGE your air filter.
@split484
5 жыл бұрын
I LOVE you tube - you can always learn what NOT to do. wow.
@jspeedracing
5 жыл бұрын
split484 so you didn’t sub? 😭
@split484
5 жыл бұрын
you already showed me what not to do - thanks!
@DimplesDon9
4 жыл бұрын
I know this is a year old comment but i definitely agreed on you guys! Saving money to use simple green not the k&n kit but your spending money to fix the engine going forward! I'm only watching this to make me laugh but not to follow 🤣🤣🤣
@kiyoponnn
4 жыл бұрын
@@DimplesDon9 lol I've been washing my filter with dish soap for years without any problems
@johnsmith1474
3 жыл бұрын
@@kiyoponnn - You think.
@loganseng6629
4 жыл бұрын
Or you could just save the 15 mins of washing time, the 2-3 hours of filter drying time and $15 on the recharge kit (not to mention the $90 on the K&N filter) AND JUST USE A NORMAL AIR FILTER. LOL Talk about Rube Goldberging things. LOL! A fool and his time and money are soon parted.
@kiyotaka269
3 жыл бұрын
actually this is more cost effective in the long term. Do the math.
@MrYingvar
3 жыл бұрын
WD 40 has Silicone in it and a drying agent that hardens the petroleum products it contains.The reason to oil the filter is to wet down the dust making the filter more effective .Also if your ride has an oxygen sensor in it, Silicone will render it useless. Give you a shout out for just your effort.
@eclos18
6 жыл бұрын
I see the comments and i see the thumbs up.. Mix feelings here..
@joshuamarler1076
4 жыл бұрын
Buy the kit for 10 dollars on amazon or the big bottle of K&N cleaner and oil. For 10 dollars a piece I usually clean after every oil change, it's good every 15000 miles but I like to clean my every 5000. The big bottles will last a long time plus easier to spray. Dont listen to this fool. The cleaner is made specifically for that filter. The chemicals in simple green and wD 40 could ruin your filter.
@marccurtis3464
5 жыл бұрын
Pro Tip. NEVER EVER rise a K&N Filter from the Intake side. You will push Dirt into the Filter Media (Denim). Read the instructions! This is the absolute WRONG WAY TO CLEAN a washable Filter. Period.
@stephenmartinez1
3 жыл бұрын
who cares which way it is rinsed? if you're using something like super clean or simply green you are not going to be cheap with your spray- it will get all the dirt out no matter what side it is on. you see the water running clear so what makes you think there is still dirt inside that will somehow make it into your engine?
@nighthawk0077
3 жыл бұрын
@@stephenmartinez1 well I suppose it's important if you're making an educational video on how to do something properly. Also he didn't let anything dry and used the wrong product to stop particles from getting into the engine. I hope no one actually does this.
@n-e-u-t-r-a-l_-2039
2 жыл бұрын
I was going to say. Why would you push the water and dirt into instead of away
@n-e-u-t-r-a-l_-2039
2 жыл бұрын
@@stephenmartinez1 it 100 percent matters.
@Mitutumuch
3 жыл бұрын
same people being rude in comments are same people who put filters on there CCV
@rosabal56
3 жыл бұрын
I guess the viewers can assume what's good and bad in this video, since they have a K&N filter, I will only be using the simple green non-toxic degreaser since i have it in my kitchen but not the WD40, of course K&N would not recommend anything but their own products aka "marketing". Humans can get very complicated. Good Video!
@functionalvanconversion4284
3 жыл бұрын
Thanks for showing a less toxic degreaser to clean. Wow, for not charging to watch the video, the criticism is harsh.
@Isaiahfraustoo
3 жыл бұрын
It’s 12 bucks bro 😐
@jspeedracing
3 жыл бұрын
it's gotten cheaper these days... just buy the kit lol
@strshooter7399
3 жыл бұрын
WD-40 is a water displacement liquid. It does have some lubication properties, but as far as using as a lubricant, I wouldn't. Sure, it would help clean the air filter for sure, and MIGHT do provide some sort ... of oil to the cotton in the K&N, but I think it is too thin, and it's not really designed to be used in that way. In a pinch, oh ya, sure, but if you're doing routine maintenance on your vehicle/motorcycle/whatever, you need something that resembles the properties that K&N's red oil has. Just saying, WD = water displacement... .
@Muthurtucker
5 жыл бұрын
NOPE NOPE NOPE...YOU WILL HAVE WASTED 40+ BUCKS if you clean your K & N this way. And $$$$ for the oil covered sensor!
@BKRedline
5 жыл бұрын
Waaaaayyyyyyyy too much wd40
@playlistajimenez5567
4 жыл бұрын
What will happen if you will not spray oil unto the filter?
@RonHei
11 ай бұрын
Take this video down. Nearly everything about it is a bad idea, particularly washing from the dirty side to the clean side. Also, never use WD40. It should never get sucked into the engine.
@BMunster
6 жыл бұрын
Oh Myyyyyyyyyy. Noooooooooooo. Lol
@meegel
4 жыл бұрын
i had to dbl check to see if this was posted on april fools lmao
@edwinvelez7307
2 жыл бұрын
you can use simple green but not wd40. the point of the kn oil is that when you applied, it become sticky. the wd40 is gonna drie and mess your maf sensor.
@Pretender4lyfe
6 жыл бұрын
Yeah, I’m gonna have to go ahead and say nah.
@davidcontreras2422
3 жыл бұрын
I think you're doing it wrong. That i know you rinse clean side out.Well thanks anyway
@Ezzell_
2 жыл бұрын
I wash my paper filters... about three time befor3 bing a new one......
@chrisa.8175
3 ай бұрын
Do not listen to this guy..! U will destroy your MAF.
@tboneaja
Жыл бұрын
Your only suppose to oil the dirty side after cleaning not both sides...
@sphinx5101
6 ай бұрын
Why not give time to the cleaners to break it down
@HailSTARS
4 жыл бұрын
Serious doubts if you saved or just blew your engine
@jspeedracing
4 жыл бұрын
HailSTARS oh she lived
@stephenmartinez1
3 жыл бұрын
"blew your engine" wtf are you talking about? are you joking or are you really that stupid to think that a little wd40 (which is a flammable solvent like the gasoline itself) is going to somehow destroy an engine? even if tipped the can and sprayed some directly into the running engine it would not "blew your engine"
@TuanTran-lz6ui
3 жыл бұрын
😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂 no fool!
@jspeedracing
3 жыл бұрын
That's a lot of laughing faces
@lutherwilliammee4817
Жыл бұрын
K&N filter oil is tacky . But hey it's not my engine
@georgemulligan8958
5 жыл бұрын
Clueless
@MannyTheDrummer88
4 жыл бұрын
You can degrease it and it will be fine but the ( WD40 ) bro WTF!
@jspeedracing
4 жыл бұрын
Crazy Manny cheap way in a pinch I guess. Helps trap dirt. The kit got cheaper since I made this video years ago lol
@jspeedracing
4 жыл бұрын
Crazy Manny make sure to subscribe
@MannyTheDrummer88
4 жыл бұрын
I have a k&n filter and I've ben degreasing it for years with no problems. I have never once used the kit Lol 😉😁👍
@lucascollins5209
4 жыл бұрын
Never use pressurized water at all to clean cotton gauze filters
@sniper346
4 жыл бұрын
This is wrong
@topiasr628
2 жыл бұрын
Why doesn't OP take down this video, if so many errors have been demonstrated in the comments? And people day the liberals are bad with misinformation 🙄
@jspeedracing
2 жыл бұрын
haha op still responds to comments lol
@stevefrench3564
Жыл бұрын
Wd 40 is a solvent...
@ompreetswain8543
3 жыл бұрын
Its a good process to wash kn
@ferdinandludo8851
4 жыл бұрын
nice info.. after you spray the WD40, do you let it dry for a few hours before installing back in the car ? or after spraying WD40 you can immediately install it back in the car.. thanks !
@tamijoiskewl
3 жыл бұрын
WD is petroleum base, it won't dry
@alialrashidi1764
5 жыл бұрын
Can I do this on a tesla?
@gregk.6723
5 жыл бұрын
Not on a Tesla. However, you can do it to your ass.
@probegt75
5 жыл бұрын
Shut up bachi boy
@alialrashidi1764
5 жыл бұрын
@@gregk.6723 people stopped ridding asses and hirses for a very long time. Do you guys still ride ass?
@frankm2385
4 жыл бұрын
Simple green, don’t use the stream only use the spray (As he uses the high pressure faucet to force the crap deep into the pleats of the filter). BTW.... you cleaned it wrong. Water should be sprayed against the air flow so you’re not forcing dirt deeper into the filter. Don’t ever use WD-40 especially on a carbureted vehicle. It could be catastrophic. Read the can FLAMMABLE. I recommend removing this video UNLESS it’s your desire to screw newbies over.
@maximXX
3 жыл бұрын
Ha-ha
@Bng210
5 жыл бұрын
Yeah sorry but you're supposed to let it dry before spraying lubricant! Water and oil don't mix. That lubricant is not penetrating and adhering because it's still wet! You going to F up MAF Sensor Bro!
@brandogamboa2945
4 жыл бұрын
You watch it again and see for yourself if he sprayed with wd40 while its wet.. stup..d
@MrBDDSWC
6 жыл бұрын
I use a 50/50 mix of mineral oil and alcohol. It's basically the same as the K&N oil without the dye. Works great.
@EdwinCaucu
5 жыл бұрын
MrBDDSWC type of alcohol?
@kiyoponnn
4 жыл бұрын
@@EdwinCaucu I think you can use isopropanol or ethanol. The important thing is that it should be as pure as possible(>95%).
@RedpilledPhoenix
3 жыл бұрын
🤣🤣🤣🤣🤣
@MrBDDSWC
3 жыл бұрын
@@RedpilledPhoenix What's soo funny? It's true.
@grape00jellly
3 жыл бұрын
@@MrBDDSWC do you have a video on how to make it?
@seeforyourself7841
3 жыл бұрын
Unless you're a mechanic or work for an air filter manufacturer you should probably pipe down. Just because you read the directions on the back of a K&N recharge kit doesn't make you an expert, just someone who follows directions...
@johnsn10
3 жыл бұрын
How NOT to clean a k&n filter lol. Nice job pushing the dirt INTO the filter
@thundacat415
7 жыл бұрын
What you is the name of the song 🎵 in the background
@mattleonard5268
2 жыл бұрын
If it’s applied on the clean side, it won’t help anything and has a better chance of getting sucked out of the filter and into the engine where it can possibly get on the maf and make that malfunction.
@justin2024atlas
4 жыл бұрын
Or you could just follow the instructions from the company that makes the filters. I'm all for shortcuts, but not like this. The only part of this video I agree with is the use of fresh water and a sink.
Пікірлер: 295