Fantastic instructional video! I have an old Honda MB5 (sitting for years), with only 1400 miles on it, and I used 'Seafoam' fuel additive to make it run better. Whereas, before it only hit 40 MPH, now it can hit 53 (it's maximum speed) after a few tanks of 'Seafoam' added! I did this instead of taking the carb apart because i'm not that mechanically inclined.
@snaponjohn100
14 жыл бұрын
Great video Don. I con't wait to see how this turns out. I just bought a can of carb cleaner. I think that is is made by Gunk. It comes in a gallon paint can, and has a parts basket inside.
@donyboy73
14 жыл бұрын
@snaponjohn100 Gunk makes good sruff, they make liquid wrench also
@boat6868
14 жыл бұрын
Nice vid...interested in seeing this Honda run again.
@donyboy73
14 жыл бұрын
@themultihacks it wouldn't hurt to replace it. it's the needle
@bellevernon15012
11 жыл бұрын
My 1984 Honda spree starts right up and idle seems good, but when I give it gas especially going up a small hill the motor bogs down and stops. I tore apart the whole carb and cleaned it with carb cleaner. drained gas tank and filled it with high octane. cleaned spark plug and gap is correct. I was told i might have a gasket leaking air some where? any sugestions?
@donyboy73
14 жыл бұрын
@snaponjohn100 correct
@mafiagayful
10 жыл бұрын
i did it to my honda but when i finished and tried to start it, it won't start. wht do i have to do
@donyboy73
14 жыл бұрын
@ringbolt9 it says it's safe
@BAHRAMCR
11 жыл бұрын
Great video and very good info. Thank you
@bruteman45
12 жыл бұрын
Hello Donyboy73 just wanted to ask you a quick question i have a 1987 suzuki ds80 i don't know what oil i should put in it. Can you help me out.
@deathkeeper5000
14 жыл бұрын
great video i might need to do this with with some kind of card if i get a chance.
@ringbolt9
14 жыл бұрын
does the engine cleaner and carb cleaner hurt the seat?
@izzyvalladarez3122
10 жыл бұрын
hey man could this process work on a honda atc 70?
@donyboy73
13 жыл бұрын
@israelikidd101 thanks man,
@stormer4ever
12 жыл бұрын
what do i do on Honda C50? Can you help me?I want to replace it with shark 22mm is it good?
@mexodus
13 жыл бұрын
what kind of engine cleaner do you use ?
@matthewrandall3139
4 жыл бұрын
I have a 1980 ct 70 and im on my second carb and the fuel leaks out through the switch for reserve valve why???
@scottmarsalis4363
6 жыл бұрын
Do you have any bikes for sal
@lastronom
11 жыл бұрын
hello, what size is it ? thanks !
@ShotGuntomy
11 жыл бұрын
what size is that carburetor ?
@snaponjohn100
14 жыл бұрын
The seat looks like brass. It has been my experience that when u have a composit-tipped needle, the seat is brass.
@janatexaswelch
3 жыл бұрын
Hi Dony! Does the engine have to be removed to replace the ignition coil on the Honda CT 70? I can't get the new spark plug boot from the body cavity to the spark plug. There is not enough room between the engine and the frame. HELP. By the way, you are F*CKING Awesome!
@donyboy73
3 жыл бұрын
it's been a while since I worked on one, you shouldn't have to remove the engine but you might have to remove the gas tank
@donyboy73
11 жыл бұрын
70cc
@scottmarsalis4363
6 жыл бұрын
Sale?
@cdcorbin1
11 жыл бұрын
Sweet
@Mark22134
10 жыл бұрын
And????where is the 2 part??????
@donyboy73
10 жыл бұрын
HOW TO CLEAN The Carburetor on HONDA CT 70 Mini Bike - PART 2/3
Пікірлер: 30