I just got my P800 up and running thanks to your videos. Would you know why it is smearing the ink as the printhead goes across? I have cleaned it several times.
@rinadrian9422
2 жыл бұрын
This was the best video I've watched so far on the whole Internet. Is not filmed great, but it's well explained and easy to understand. Well done!!
@p800guy4
2 жыл бұрын
thanks and sorry filming is not my strong suit lol
@BetterThanKanye
2 жыл бұрын
Your video brought my p800 back to life. My black nozzle was completely clogged and I had zero clue what to do. I used your windex solution in the other video as well. Basically the fix took some time…maybe 12 hours total…including letting it sit … but cost me only ~6 bucks to make the solution and get a dropper and restored my sanity. 🙏🏾 🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾
@p800guy4
2 жыл бұрын
That's so awesome glad to be of assistance I've been through these maddening issues myself i Understand what you were probably going through 🥲 hope everything works out all the best!
@HansWahlgren_Stureby
12 күн бұрын
The release wheel that you crank to release the print head, when you lock it, do you crank till it stops, or when do you know it's correct?
@MelanieShirley
8 ай бұрын
can you help me figure out why no white is printing? When I do a print head check it will show some white in two of the cartridges but none in the others and I have done MULTIPLE Heavy head cleanings.
@2WistedWolf
5 ай бұрын
what alternative for windex ? its not available at my country
@inklabdesigns
2 жыл бұрын
What's up man. I have a P800 myself that I want to set up so I'm glad I found your channel. Can I ask just a couple questions? 1. How long have you been using your P800 for DTF? Any issues since then? 2. Average how many prints do you run through it every day? 3. I'm assuming you use Cadlink since you mentioned it. Have you timed how many minutes it takes to print 1 A3 sheet? I've been told it's pretty slow with Cadlink so I'd like to get an idea how slow that is. Thanks for your help.
@p800guy4
2 жыл бұрын
hey welcome to the family 😅 1. I've hade one since June 2021 and I have had many issues lol I'm on my 3rd one. Most of my issues were due to trial-and-error though as I like to learn things the hard way 🙃 and these machines are delicate. 2. on average about 13"x36" worth of printing per day 3. yea its slow with cadlink If you reduce the white underbase it does speed it up a bit but it also reflects in the final result so you gotta give-and-take but I'm kind of used to used to the slowness now. 1 A3 is about 15 man's give or take. I also use the roller which makes life a lot easier. hope that helps
@inklabdesigns
2 жыл бұрын
@@p800guy4 Can you describe some of the issues you had? Clogs?
@williamparker777
2 жыл бұрын
Great video,. You should say see this video when removing the rollers to show how to love the printhead for better access. Awesome. Ty.
@p800guy4
2 жыл бұрын
thanks for watching and the feedback 😊
@hortod1
Жыл бұрын
Did this, now it’s throwing an 1126 code. Can’t clear it. Any thoughts?
@ctstampe
2 жыл бұрын
your videos is one of the reason i chose to get a p800 myself ! thanks to your tips man! however, i have a clogged white channels (printhead) right now, the Whites are not coming out, have you had the same problem? if yes howd you resolve it? thanks in advance!!!
@p800guy4
2 жыл бұрын
Hey sorry for the late reply as I do tend to miss messages messages. Congrats on the P800 it's a beautiful yet a beautiful yet needy machine :) The whites can be very tricky as it has to be clean daily for optimal use. But usually a couple head charges should be OK and if not then a heavy head clean. But make sure they are done consistently though
@ctstampe
2 жыл бұрын
@@p800guy4 do you have a video on how you take it apart? or have you already opened it up and inject the cleaning solution on the head? again, Thanks in advance!
@AmericanWithTheTruth
Жыл бұрын
I got an entire set of refillable cleaning cartridges. Do you not run the ink out of the lines and push cleaner through them For cleaning? If so how often do you clean everything including lines?
@p800guy4
Жыл бұрын
That's Smart , I have that as well I do them maybe once a month depend on volume I print or if I'm not going to be around my printer for a couple days
@AmericanWithTheTruth
Жыл бұрын
@@p800guy4 ok do you use a specific program for charging the lines?
@kennex1
Жыл бұрын
Any tips on getting the white unclogged after trying the above steps and it didn't work?
@CryptikzChannel
Жыл бұрын
My printer seemed to clog itself over night! one day perfectly fine, then I did one cleaning and it clogged the heads :(
@berkshireembroideryprintin8956
Жыл бұрын
Are you still using this p800? I was debating on buying one and converting it but was hoping for some feedback. Thanks
@p800guy4
Жыл бұрын
Hey it's a great starter machine I love it. Due to the volume of printing I do now I don't necessarily use it as my primary machine. But it really comes down to how much printing you are doing. But when it comes to the price and the Bang for buck It doesn't get much better if you can find one
@charleskelly829
Жыл бұрын
@@p800guy4 what printer are u using now I have a p800 but my demand growing and I'm looking for something different
@p800guy4
Жыл бұрын
@@charleskelly829 None :) when orders get too much for the 800 I outsource to a friend of mine locally who has a larger machine.
@p800guy4
Жыл бұрын
Congrats by the way to being at the point where the P 800 is not enough… that's progress!
@aishakhamis6007
Жыл бұрын
Hi My printer problem 1. Replace the APG sensor. 2. Replace the APG motor Wher ABG sensor in epson p800
@ericzzz924
2 жыл бұрын
Do you clean it everyday?
@p800guy4
2 жыл бұрын
I do personally yes. some people I know don't but I do.
@ericzzz924
2 жыл бұрын
@@p800guy4do you do it at the end of the day or at the beginning of work?
@p800guy4
2 жыл бұрын
@@ericzzz924 I do it at the end....i shake the whites and do a head clean in the beginning of the day before I start to print
@kaisar.bdahmed5535
2 жыл бұрын
Can you share how to make cleaning solution
@p800guy4
2 жыл бұрын
Hey I actually have another video for that if you just check on my page
@marshduncanson4150
2 жыл бұрын
If only there was some sort of device to hold your camera so that you can use both hands.
Пікірлер: 35