Awesome. I told my wife that the greatest gift of the Internet is handy dudes with KZitem channels showing people how to do cool stuff.
@jetstartransportation3366
3 жыл бұрын
Great vid. How much is it and also shipping to Marietta GA 20067?
@Spraywell
3 жыл бұрын
The dual PW kit is $149.95 free shipping
@genedhallinc
3 жыл бұрын
Running both on garden hose only? No tank? This looks tempting when buying another 4gpm is much cheaper than even a 5.5 and way cheaper than an 8gpm.
@samernam
3 жыл бұрын
When that second machine fired up 😂😂
@oside760a
3 жыл бұрын
Yo this is really inventive. I never knew you could do this. It has given me ideas about my rig.
@alex102390
Ай бұрын
Will this work with 2 electric pressure washers? For example 2 1.2 gpm 1800psi Ryobi Ressure washers x 2 = 2.4 gpm 3600psi?
@fensterputzernuernberg
3 жыл бұрын
Big difference in efficiency there when 2 are coupled together , clear to see when you pressed the trigger.. Great Video thanks .
@rosekreuze
3 ай бұрын
I was thinking of the same thing on my cordless pressure washers since I have 4 of the same kind but they are all brushed motors 😅
@newwavepressure6478
3 жыл бұрын
Would like to see a direct-drive converted to a belt drive I have to Honda GX Motors I would like to put to use
@orangejuicejones571
3 жыл бұрын
awesome invention, awesome video, thanks. Is it only 4gpm, can I hook up two 2.5 gpm units to make a 5 gpm unit?
@DjBlaze604
2 жыл бұрын
Yes you can. I have done it where the machines where not even the same gpm or psi and they worked perfectly... youll just burn out the pump if it doesnt have the water bypass going back to tank or spitting the water out. Or you have to keep pressing the trigger every few seconds amd watch out for that kick... will throw you off a ladder
@wehttamgtrekce
Жыл бұрын
@@DjBlaze604 I have a 2.5 gal PW so I attached a splitter to my gun. On one side is my pressure hose. On the other is a ball valve with a short hose attached to it so water can drain through it. The trigger on my gun is always pulled to spray and has a wire wrapped around it to keep it pulled. I use the ball valve to direct the water either to go through the wand or through the ball valve and out through the short garden hose. My ball valve works as my unloaded so I don’t have to shut the engine off every time I want to change out my tip or attach the surface cleaner. I just have to turn the ball valve slowly so I don’t cause a kick to the pump.
@NouriGains
3 жыл бұрын
Awesome man appreciate it. Have this like & sub. 2.5 GPM + 4 GPM = 6.5 GPM for less than $1000... aint bad! Thx
@yannloranger4001
2 жыл бұрын
Can you use it during 8 hours or it is dangerous? what happens if one of two machine get out of gaz, did you test it ?
@robertbyles2777
Жыл бұрын
If I have 5 gpm 3000 psi belt drive can I upgrade pump to more gpm?
@stevem1081
8 ай бұрын
I was interested in the kit, but the link does not work.
@markvietti
2 жыл бұрын
looks great but I cannot get the links above to work.
@theantisimp8258
3 жыл бұрын
I have two 2.6 gpm 3300 psi, will this still work for me?
@Spraywell
2 жыл бұрын
We made a bunch of improvements in 2022: We changed our name and launched a new website. It's easier than ever to find what you need and get it fast. Visit us at spraywell.com
@Mollygirl91
3 жыл бұрын
Your stuff is so informative. I am from Australia. Nothing like you here that I am aware of
@oside760a
3 жыл бұрын
Hi David. I really like the idea of having the flexibility of working with 4 or 8 gpm on the fly. I have heard that having direct drive pumps is not a good set up if your going to feed them with a buffer tank, what are your thoughts? I was told if you're gonna have a buffer tank, get a belt driven pump. Thanks again.
@00700556
2 жыл бұрын
get a belt driven OR gear driven
@xtremepowerwashing1815
2 жыл бұрын
Direct drive will work, you just have to make sure you bleed all the air out of the line. I've been doing it for years.. but I do recommend belt drives myself.
@samgan1728
2 жыл бұрын
Direct driven pump can suck the water from a buffer tank but is not so good as belt driven or gear driven. The main reason is the RPM, lower RPM pump has better self suction function. The direct driven is 3400RPM when the delt or gear driven is only about 1700RPM.
@evanlucas8734
2 жыл бұрын
@@xtremepowerwashing1815 will you explain more I’m wanting to buy two 4gpm machines that are direct driven and connect them together as shown in the video to create an 8gpm flow and I know I’ll need a buffer tank for have that kind of flow. Do you think that’s a bad idea
@xtremepowerwashing1815
2 жыл бұрын
@@evanlucas8734 it's not a bad idea at all. I've done that for years. You just have to make sure the lines are filled with water from your buffer tank and you should have no problem.
@jesusson3475
2 жыл бұрын
Can I do this with 12v pump
@BlackSheepEvents
6 ай бұрын
Are you still selling these
@joeatchison3038
3 жыл бұрын
When will you have cat pumps back in stock
@jcoul1sc
Жыл бұрын
a Y joint would be better
@barrettlore3085
3 жыл бұрын
Do you make this in a already put together package ?
@itsasldghammr
Жыл бұрын
niice
@detaildemon2904
3 жыл бұрын
Is there a different version to combine two 5.5 pressure washers to one line?
@xtremepowerwashing1815
2 жыл бұрын
Same system. I personally run a 5.5 and a 4 gallon per minute together. Gallons per minute don't matter you just have to make sure they are running at the same psi.
@trentmiller7532
Жыл бұрын
Do you have or can you make a generic video on how to adjust pump pressure on pressure washers? Just so I/we have an illustration on your comment about making sure your pressure washers are running the same PSI. Thank you
@clapped1.629
Жыл бұрын
I’m planning on running 2 direct driven 4000 psi 3.5 GPM dewalt pressure washers together. I heard that direct driven won’t work with a buffer tank. I just bought the product and found this out after, I really hope there is a way to do it. Please let me know if this is possible so I didn’t just waste my money!! Thanks
@philiplogan6416
3 жыл бұрын
very interesting setup. is it possible to to do the opposite. run 2 lances from one machine
@Spraywell
3 жыл бұрын
Yes but would require an 8 GPM set up to be worth your while. Splitting a 4 GPM into 2 would only make 2 people work harder.
@pacfilming8117
2 жыл бұрын
Hey I want to try this but I ain't Honda I am simonz electric how do I do this
@honduraschris
2 жыл бұрын
Good info. Many have thought about something similar but never tried this. BTW.... JN has been around for many many years. I’m not sure the owner now or back in the 1990’s but the company is still going as you can see. Props to JN.
@DetroitHomeInspector
3 жыл бұрын
I have two different size power washers. So, it sounds like you don't recommend combining them? I'd hate to buy another washer just so the power matches.....isn't that what the check valve is for? Anyway, great job.
@xtremepowerwashing1815
2 жыл бұрын
Check valves prevent the back flow from the other machine working against it if the PSI is not the same.
@anthony1113
Жыл бұрын
I don’t know any residential water lines that provide anywhere near 11gpm
@trentmiller7532
Жыл бұрын
Hey man great video. I did hear you mention that you sell parts, and out of curiosity, would you happen to make a bracket to mount the pressure gauge to one of the two pressure washers, so it’s not hitting the ground?
@mariofelix6182
Жыл бұрын
Awesome video Dave .trust me i had learn lots of tips from You ...thanks a mil
@shanecastillo9313
3 жыл бұрын
Wait What You Can Assemble That Hose Kit Nice @JN EQUIPMENT
@DDG-Downfall
Жыл бұрын
seems interesting so i can add 2 18LPM machines
@Steven-eh9qs
3 жыл бұрын
the ball valve for rinsing should be 8gpm too , right? don't need no tip?
@fushion999
2 жыл бұрын
Would you be able to hook this up to a street cleaner or need find different tips for it?
@cleanmaxexteriorpowerwashing
3 жыл бұрын
What happens if you combine two machine with different gpms?
@xtremepowerwashing1815
2 жыл бұрын
Same system. I personally run a 5.5 and a 4 gallon per minute together. Gallons per minute don't matter you just have to make sure they are running at the same psi.
@DjBlaze604
2 жыл бұрын
Ive a run a 4000 psi 4 gpm and a 2.5 gpm with 2800 psi and no notice issues.... your milage may vary tho lol
@alejandrocuellar15
Жыл бұрын
@DjBlaze604 can I get an update? Haha
@lapimano2
2 жыл бұрын
Having 2 pressure washers connected is a fun and good idea, but if you want to take an optimal result, then it will take more that what was shown here. Most importantly the hose after connecting the two streams should be bigger in diameter to handle the flow, otherwise you can experience a sewere pressure drop till the water reaches the gun. You also want to make sure you get all that 8gpm out of your machine. If there is too much pressure (the hose, and the nozzle is not sized properly) the unloader will redirect the flow of high pressure water back into the pump, which means reduced flow amount at the gun.
@aaronmoore5552
2 жыл бұрын
I’m not sure how much the hose size will effect gpm because the pressure is coming from the largest restriction in the system (he nozzle) for a designed flow. Assuming your orifice requirement is several time smaller than your hose area it should be fine I would think.
@areeskinwar7274
2 жыл бұрын
Can I get more PSI when combining plus the GPM ? I have 2 - 3200 psi / 2.5 gpm machines and I would like to see 4000 psi 4-5 gpm
@rtw5634
2 жыл бұрын
No. Just the flow is combined. Each pump is already operating at its max psi
@easternsoftwash
3 жыл бұрын
That's amazing!!
@awfab3517
Жыл бұрын
That will skin a deer quick
@RustyShackleford-fv3vl
2 жыл бұрын
Still make it? Can't find it on the site
@hedgefund9892
3 жыл бұрын
Shouldn’t you have by pass on both units in case of heating up the pump? Not sure if unloaded are enough. Thoughts?
@awfab3517
Жыл бұрын
I think both pressure washers have a bypass relief valve at 4000 psi s water is constantly going through the pump idk
@kroperez6761
3 жыл бұрын
Father Day Gift !
@LeMansta1
3 жыл бұрын
What kind of unloaders are on the machines? Pressure or flow?
@Spraywell
3 жыл бұрын
VRT3-310EZ
@shaundarcy6517
3 жыл бұрын
that is awesome
@Igor-q3f
3 жыл бұрын
Can you use two downstream injectors for stronger mix?
@Johnnyreengo
3 жыл бұрын
You would have to run two injectors to maintain the 10:1 ratio. Otherwise it would be 20:1
@Igor-q3f
3 жыл бұрын
@@Johnnyreengo how the 8gpm machines run the injectors at 10:1
@DjBlaze604
2 жыл бұрын
Wrong... you just have to use 1 2.1 or smaller sized injector gor strong mix as a 4gpm
@Igor-q3f
2 жыл бұрын
@@DjBlaze604 where do you place the injector, next to one machine before the coupling of two hoses or after?
@ah-rr1lk
3 жыл бұрын
Dangerous equipment here. Plug one hose in the wrong spot and you have a huge problem.
@jaredh8h8
3 жыл бұрын
I don't believe it would be possible to connect incorrectly. Hose ends are male/female on purpose to connect one way only.
@Spraywell
3 жыл бұрын
Any piece of high pressure equipment is potentially dangerous. Your comment is correct, if you were to use this incorrectly it could be dangerous. The same could be said about a pressure washer without this accessory. Always be smart and be safe.
Пікірлер: 87