This is the most straightforward and effective process I've seen. Thanks a lot.
@OuttenAstrophotography
7 ай бұрын
Glad it helped!
@masonguy
7 ай бұрын
Great finding your channel. I'm just starting out and want to encourage you to continue. Love the tutorial! Looking forward to trying it out!
@corinlewis3073
2 ай бұрын
Thanks for tutorial on combining SHO data with a OSC . I'm now learning how to use Pixinsite software, so I have saved your video to Pixinsite play list.
@craiglowery4427
6 ай бұрын
Wow. So glad I discovered your channel. I’m glad to see the EZ soft stretch tools available again
@nikaxstrophotography
7 ай бұрын
thanks for the work through, you made it look so easy, nice work.
@scottdunn6512
3 ай бұрын
Thank You!! This was so easy to follow along. I took notes and I'm ready to try this myself.
@dadwhitsett
22 күн бұрын
Very helpful. Can you list the color enhancement tools [briefly] that you skipped over at 16:16 ? TY!
@mreddick786
4 ай бұрын
Thank you so much. This was super informative and easy to follow,
@FahimSikder
7 ай бұрын
Thank you for the video! Great job!
@OuttenAstrophotography
7 ай бұрын
Glad you liked it!
@Sailor5116
Ай бұрын
Very nice vid, thank you! I have the Optilong L-Enhance and Askar C2. Hoping these two will work together.
@OuttenAstrophotography
25 күн бұрын
Of course they would! Just would have a stronger signal with the L-extreme over the askar c2
@rameshtahlan
3 ай бұрын
Loved it.
@messier7849
6 ай бұрын
I have the Askar 2 and L-Ultimate so this is great. Unfortunately I am doing galaxies and emission or reflection nebulae so...maybe at the end of summer.😊
@alfredterrence6112
7 ай бұрын
The best SHO processing video i've seen so far, hands down ! Just one question, is it necessary to run SPCC after DBE for this type of processing ? Thanks.
@OuttenAstrophotography
7 ай бұрын
I didn't use SPCC at all for this process since we are technically using "mono" images to combine into one color image. DBE of course to take out the gradients. i would only do the SPCC for SHO if you happen to take RGB stars in the process or back to the one of the either original files to extract those stars instead.
@KaiHui-xm2mp
6 ай бұрын
very clear process!
@jonathanritter7364
9 күн бұрын
Whats the difference in doing all the channel combo like you did at the beginning, or just skipping straight to narrowband normalization? Just a stronger signal when you combine channels etc?
@hael8680
7 ай бұрын
Subscribed! Do those Askar filters create halos?
@OuttenAstrophotography
7 ай бұрын
I notice only faint halos but that's the gamble of the lottery
@rainerjehle2522
Ай бұрын
Danke!😁
@OuttenAstrophotography
Ай бұрын
You're welcome!
@MrMrduke1975
3 ай бұрын
I’m confused. So you combine the dukes of both nights to get more data, when you’re stacking then? You combine them during Post process? I think this is the detail I’m missing.
@JeffFishman
27 күн бұрын
watching this again ... :) Did you sack the C1 and C2 data separately ? Thank You
@OuttenAstrophotography
25 күн бұрын
Yes and no depending on the software you are using. With pixinsight you can run both at the same time as long as they are labeled seperate with your corresponding flats
@IamArtimon-ui4co
7 ай бұрын
Hello, Thanks a lot for this super video! What about the sensitivity each color channel has in other colours from your camera? When we look at the graph respons of each channel, we see that a percentage of OIII is polluated by the respons in Green & Red. same for other channels. Is it possible to take care of this as to get the more scientific respons for each OIII, SII & Ha images? Thanks in advance for your help!
@rameshtahlan
2 ай бұрын
So your video Motivated me to go for Askar D1 D2 rather than make a hole in my pocked and go of MONO. Thanks a ton. Was lucky to get the D1 and D2 filters. Last night got an open sky in the monsoon season, and grabbed 12 subs D2 and 4 subs D2. All 300 seconds. Will grab more when opportunity strikes. Your video starts with the stacked images of C1 and C2. So do I stack them separately, and then load them into Pixlnsight for processing, OR do I put everything into PI and PI will give me two separate stacked images ? Since your reply will come much later, I am right now stacking them separately. Will see how I progress. Patiently await your advise.
@OuttenAstrophotography
2 ай бұрын
Good choice going with the D1 and D2 sets they are phenomenal filters. So in the stacking process you can do it in the same WBPP session but you got to make sure you go into the "ADD Custom" to assign the lights and flats for each filter. Sometimes wbpp won't do it automatically. Plus it helps when the auto crop happens it plate solves and star aligns the both images for you. Just one less step to do =P
@rameshtahlan
2 ай бұрын
@@OuttenAstrophotography I am really dumb in this. Would it be possible for you to make a video to show how to set it all up in Pixlnsight after which one can hit the RUN icon. Would appreciate it. OR would it be easier for me to stack separately, and then will Pl allow me to select the two stacked images and then post process when I follow what you have shown in the video
@OuttenAstrophotography
2 ай бұрын
Absolutely I can. I would have tonight but it's me and the wife's anniversary so I don't wanna take away from that but tomorrow I Absolutely can.
@OuttenAstrophotography
2 ай бұрын
Good news the video is up! kzitem.info/news/bejne/042eupudk2mgjaQ
@rameshtahlan
2 ай бұрын
@@OuttenAstrophotography all the best
@KMD3823
15 күн бұрын
Did anyone have a problem when you get to LRGBCombination where the OIII channel couldn't be found? Problem with the OIII Pix Math equation? In a later tutorial, you use different equations for getting master OIII channel. If Blue is the least prominent and Green essentially double (RGGB w/ ASI 2600) why do B*0.2 and G*0.8? You would think it's the other way around for color balance. Am I missing something? Still new to PI processing.
@OuttenAstrophotography
13 күн бұрын
There is a new script that's out there to automates the whole system known as DBXtract. If you google you will find the link for that. Much easier than the old school way
@JeffFishman
Ай бұрын
Hi, interesting video. I am kinda new, but shoot with 2600 and filters (L-extreme , antlia triband, etc..) and process and use narrowband normalization and play with SHO, HOO, etc.. and kind of do what you did. Am i missing something? Thanks
@OuttenAstrophotography
25 күн бұрын
Pretty solid! Just got to make sure you make your color masks and enhance those colors
@christianbedard8048
7 ай бұрын
Great job, i supose that it's the same workflow for the askar d1 and d2 filter?
@OuttenAstrophotography
7 ай бұрын
Correct. In any case, any set of Ha/Oiii and Sii/Oiii filters, this method works for all of them!
@Star_Observerastro
3 ай бұрын
What is the bandwidth of these filters, please tell me?
@OuttenAstrophotography
3 ай бұрын
For the C1 it's 12nm Ha and 35nm for Oiii C2 12nm Sii and 35nm Oiii Similar bandpasses as the Optolong L-Enhance
@Star_Observerastro
3 ай бұрын
@@OuttenAstrophotographyThank you very much for your time, have a clear night 👍
@jimcollins1922
7 ай бұрын
Can you use the C2 filter with the L_ultimate to get the same results?
@nikaxstrophotography
7 ай бұрын
it should work
@OuttenAstrophotography
7 ай бұрын
Should be no problem at all. I've used this same method with the L-Ultimate and the D2 Sii/Oiii filter with great results
Пікірлер: 48