Very useful if you have a lot of controllers and want to mix and match colors for a super custom look
@holdencalhoun5270
Жыл бұрын
Why'd they make it so much harder than the previous generation xbox one controller? 😕
@WarMasterX6
Жыл бұрын
Probably warranty? Plus a lot of corprorations seem to be highly against businesses making money off repairing or modifying their products probably due to wanting to charge or sell more.
@teocusato
Жыл бұрын
.
@official.aproxioiplus
Жыл бұрын
A lot of big company’s are making it much much harder to repair devices because of warranty
@official.aproxioiplus
Жыл бұрын
They also wanted a lot of removable parts because of customization! :)
@FatManJerry
Жыл бұрын
I doesn't look much harder than the previous just an extra antenna wire and different lb/rb placements. They probably just don't want people to make profits from shell swaps, since 'exclusive' controllers go for much higher even though the only difference is the shell. I've modded both my Xbox one s controllers and their extremely easy.
@Arcipellaggio
Жыл бұрын
My gamepad is old and this video is beyond perfect, thank you for it!
@X320riginal
Жыл бұрын
Did you fix it? 😊
@shi-woonyi2605
Жыл бұрын
Thank you, after one year, my Y button didn't work 100%. I tried rubbing alcohol, which didn't work. Typical Microsoft button error, at least I thought that. Ordered a new one, the buttons on the new one worked, but I didn't like the feeling, I thought I just have to use it the controller for a while, and it will feel the same as my other one. Months later, still the same feeling, so I searched for a video and found yours, tried my luck With this tutorial it was quite easy, thank you for doing both dissemble and reassemble. Well, end of the story, I found dirt on the rubber where the Y button contact is, on the board. A big thank you again!
@Vieers
Жыл бұрын
Did it work really? On mine Y doesn't work properly.should i try this?
@shi-woonyi2605
Жыл бұрын
@@Vieers it might help, but xbox controlelrs are known to have a lot of quality control issues. If you don't have any warranty left you could try it
@Vieers
Жыл бұрын
@@shi-woonyi2605 i don't have any warranty :( I'm gonna try myself and type here if it does work 👍 thanky you very much
@shi-woonyi2605
Жыл бұрын
@@Vieers good luck!
@Vieers
Жыл бұрын
@@shi-woonyi2605 hi bro.just opened now and closed again but still the same problem.idk did i something wrong? how did you clean.
@Archsage
10 ай бұрын
I get that you claimed the Xbox controller was disassembled, but it wasn’t actually. You still had the triggers, springs, and Pins in - which is what I’m looking for when I look up a full disassemble.
@tamrynvaughan8121
8 ай бұрын
Have you found a way to fix it yet
@okclaps4071
6 ай бұрын
Just look up how to do that
@Archsage
6 ай бұрын
@@okclaps4071 I wonder what the title of that video would be..? “How to completely disassemble an Xbox series X controller”? Oh.. wait… 😅
@iRiShNFT
Жыл бұрын
lol "Thanks to the magnetic base your screws stay on the mat and you will not lose them" ... he lifts it up and 1 screw immediately disappears hahhahahah
@sevbait
10 ай бұрын
Thanks! My 10 month old daughter tossed her older brother's controller in the toilet and I thought it was toast. Took it apart, cleaned it all with alcohol and blew it out with compressed air, then reassembled with your fantastic guide, and IT WORKS!
@saintgtx
6 ай бұрын
Thank you for this! My black controller started to have stick drift, and I found a good deal on a red controller, but I'm not a big fan of the color, so I completely disassembled both using this guide and mixed and matched colors and put them back together, both controllers work great! (Aside from the preexisting stick drift on the other one).
@aidencostaraposo
10 ай бұрын
Thank you, it help me break it even more❤❤
@LeeTzGaming
9 ай бұрын
skill issue
@heickelrrx
Жыл бұрын
woa, thank you, just fixed mine from sticky button issue, dust accumulation
@JZPena
4 ай бұрын
Awesome video. The X and A buttons were sticky. Took it apart, washed it and now they work great.
@sal5463
2 ай бұрын
I'm very thankful for the clear guide. I don't understand why they made so hard to open unlike the PS4 controllers. I literally needed an explaination video to do it. lol
@kimdyer2288
9 ай бұрын
Excellent walk through. I've done this enough that I have it handled, but the hairdryer for the label was a nice touch! Thanks.
@ArthurM_1998
4 ай бұрын
Thanks, because of you I was able to find the source of why my LB button sinks in instead of clicking! Darn tiny part of it snapped! Thank you! I’m able to replace that part thanks to your vid.
@golbibulbus5183
Жыл бұрын
Getting the rumble motors back in was a pain since I have to lift the back part up with tweezers which feels hard.
@CockyDiesel
5 ай бұрын
Same problem I'm having I can't get it
@Dbook-u6p
9 ай бұрын
My left analog stick wasn’t working when I would go up and this helped me fix the analog stick by removing it
@kholvenstot
4 ай бұрын
Thank you for this! I was able to get it taken apart to clean and back together much better than if I were to try myself! 🙏💯
@Lucid_YT1
Ай бұрын
"bro its just a prank" the prank : 5:34
@bazeline1977
10 ай бұрын
Thanx, i was able to switch parts. Now my costum controller works again.
@Explorist719
3 ай бұрын
I found the problem. Thank you. It turns out there is a little piece of plastic that has partially snapped. I have never dropped my romote, and it's only 1 year's old. It just happens so quickly. I have fixed it by putting very strong glue on the bit of plastic attached to the LB trigger. 🙂
@coleman4725
6 ай бұрын
TY! BTW, a commercial played around the 5:47 mark, and I skipped it. Next thing I see is that coffee...why can't I SKIP this commercial 🤔? Oohhhhh😮, part of the video🤦♂️😂🤣. Thanks again. Super helpful & my controller is 💯
@ANIME-ei4zd
2 ай бұрын
Two Antenas MVP
@armandmuhigi2588
2 жыл бұрын
Thanks for the reassemble. I wouldn't remember how, lol
@r0IIo
Жыл бұрын
How else can I do it? I don’t have that weird screwdriver thingy please there’s a spider inside my controller.
@You-bj9pv
Жыл бұрын
How did that happen
@justinalvarado7351
8 ай бұрын
Thanks for the Vid this really helped and I LOVE LOVE LOVE granularity in how to vids
@erenyeager8306
4 ай бұрын
Why didn't you included the sync button in the tear down? I've just spent the past hour putting my controller back together and I know have to take it apart because of that :(
@DustinKlang
3 ай бұрын
same
@cristiandejesus2182
2 жыл бұрын
Thanks for the tutorial!
@editorgaming6809
11 күн бұрын
For me nothing change only RT.LT.R3.L3 and xbox botton is work😢
@timo.0
2 жыл бұрын
Yayyy i fixed it! Thanks!
@user-pe3rk3sr6w
2 жыл бұрын
🤓
@MrFunny-gq8gu
Жыл бұрын
I fixed my analog, but it no longer turns on. Any ideas?
@Administratorius
Жыл бұрын
After two years of usage, X key got stuck completely. Thanks to this guide, I've managed to disassemble, clean and re assemble the controller. Had to use T6 and T9H screwdrivers. Everything works fine. Thanks.
@Durimsleepin
Жыл бұрын
Same fucking thing happened to me but after 7 months no clue how it jus became sticky all of sudden
@life_of_sailor
2 жыл бұрын
fixed my controller thanks man
@kaydenxeon8022
3 ай бұрын
Really helpful but now my lb and rb buttons sound way too loud and feel a little stiff, how can I fix that?
@reviver9479
18 күн бұрын
Do you know what to do if your Xbox controller is overheating
@meoff7602
Жыл бұрын
Well that saved me a ton money. Thanks
@gregoryherron6264
4 ай бұрын
Beware, my XBox Series S wireless controller required Torx Security T6 and T8. Regular Torx T6 and T8 are different and did not remove the screws.
@Dark_Jaguar
2 жыл бұрын
This is nice but try using a real voice next time. This robot voice is unnaturally excited about everything.
@ugglass7277
Жыл бұрын
literally cry about it lmao
@Dark_Jaguar
Жыл бұрын
@@ugglass7277 I know now why you cry. You stay. I go. No following. Johnny-5 is alive.
@Albert8044
4 ай бұрын
Current gen console controllers PS5 and Xbox SX or S are prone to drifting at inopportune times.
@ghost77gaming
5 ай бұрын
U forgot to show how to put sync button I noticed when I was managing wires
@snak3arry
4 ай бұрын
Thanks man
@jesseatkinson92
10 ай бұрын
Of course they are T8's lol the most uncommon torx size that doesn't come in most tool sets.
@YelloFelloMC
9 ай бұрын
this guy has some MAN HANDS. 2:30
@J.T.G.
Жыл бұрын
Where's the part with tiny Black wires with gold ends I need to connect one
@jordon4382
3 ай бұрын
the first screws in mine gotta be a t7 bc the 8 is too big but 6 is too small🤦🏾
@kyleguard2366
Жыл бұрын
For some reason my controller won’t turn on now. I used all the right tools and didn’t scratch anything hmm. Weird
@kulickla
3 ай бұрын
These crewdrivers cannot be bought legally in my country so i guess i wont be able to dissasembly mine to clean it damn i have to buy new one that sucks
@fanatisar7160
2 жыл бұрын
I used my torx t8 screwdriver to remove one of the screws, but it won't let me remove the others, why?
@Tetragramix
2 жыл бұрын
Another video I watched said they were T9. I got a kit with T2 - T10 to cover everything.
@BeanBag1817
Жыл бұрын
the outside and inside screws are different you need tr8 for the outside and tr6 for the inside
@rodolfo443
2 ай бұрын
I did something stupid, there's no way you could make a video reassembling the entire control step by step
@thegamingpanda1094
7 ай бұрын
what screw size or is it to unscrew it im losing my mind trying to get them out
@handlepersonthing
2 жыл бұрын
I had to use a T9 on mine for the back, not a t8
@NeiborhoodBoysPotato
6 ай бұрын
the triggers are very hard to get the covers on
@mikecathosequest8595
Жыл бұрын
is the trigger motor the same size or the left one is bigger?
@sO_RoNerY
Жыл бұрын
Probably the same size. I know the controller rumble are not the same size
@jeffreyvanschouwen3637
2 жыл бұрын
One of the best tutorials
@rdsjankee8532
6 ай бұрын
I had a house fire and my xbox power button melted from the inside now i cant turn it on by pushing the console power on button i opened it up and its the spring clip thing that melted do you have any for sell or know where i can get it?
@captainrobots1
8 ай бұрын
My jou stick actual broke when playing an fps it's not even connected to the controller at all.
@Bowinger
11 ай бұрын
I've bought a new motherboard for my series Controller, and -Tada- theres is no software on it. Where can i get this for the Motherboard and hoe can I install it? Cheers ❤
@JeebusCrys
Жыл бұрын
Are those T8’s security bits? I can’t seem to get any grab.
@efsooff-duty4539
2 жыл бұрын
Motherboard with analog bases costs more than most new series x controllers. Better to look for a sale and then just buy a controller for parts (or just use it as is)
@SkulsterDulster
2 жыл бұрын
Found a listing for like 30 bucks each on ebay for the boards with the sticks. The controllers are double the price.
@chancewindham1718
2 жыл бұрын
@@SkulsterDulster used controllers are about 30 bucks and you get all the other extra shit with it
@SkulsterDulster
2 жыл бұрын
@@chancewindham1718 True as shit fr
@Tetragramix
2 жыл бұрын
@@SkulsterDulster New controllers are $50. At least right now.
@webby6944
7 ай бұрын
I came to see how to put the sync button back in but you didn’t even touch it
@captaincalamari7451
2 жыл бұрын
The charger case won't even open for me, idk why
@Mr.BC777
4 ай бұрын
Question does the top sync button come off too? (The button on top in between the LB and RB button) I am interchanging the white series S controller and the black series X controller to mismatch the color and buttons. I also see that the RB and LB buttons are still one piece like the older controllers. I wont be changing the trigger buttons just the bumper buttons piece. Can please someone that works on these let me know if that sync button comes out too. Thanks! 😀
@Kenooman
4 ай бұрын
Yes it does!
@avia4281
2 жыл бұрын
Batteries leaked acid i used alcohol and white vinegar button y working again. Will the board or y button damage soon? I notice on test when i press y the red win 10 led gamepad tester app its showing red led a tad dim compared to other buttons.
@samanfz6812
4 ай бұрын
Hello sir I have problem with my controller it wasnt calibrated my analogs didn't stick to the calibration wall and right ananolg in cod wouldn't stop just moving right and left I took it to a so called technensian and he changed shocks for 3 or 4 times last time I tested it and everything was normal but when I returned home and wanted to play after 5 min controller got crazy left analog only want to left d pads jumping 2 up and down I recalibrated it fixed but 5 min later it got crazy again this time right shock only fast turning to left and left and right sides were changed.after every successfully calibration its goes crazy again Please help me is this issue from board or shocks.its been 10 days and not fixed yet.
@Greystone
Жыл бұрын
Can't find the video of Elite series 2
@slitzworld
Ай бұрын
the triggers are impossible to put back on
@slitzworld
Ай бұрын
nvm I did it after 30 mins
@zeroxbox443
9 ай бұрын
When i press my bumpers the triggers go down to can anyone help me?
@ethanwesley4734
Жыл бұрын
My screwdriver won’t work
@DillFill-oi7hc
5 ай бұрын
Are you sure you didn't press r3 while in the process. If so you have too press control alt delete to reset the screwdriver.
@ethanwesley4734
5 ай бұрын
@@DillFill-oi7hc 🤣🤣lmao I thought you were being real
@DillFill-oi7hc
5 ай бұрын
@@ethanwesley4734 👀 sus
@markusg.9749
8 ай бұрын
Hello, I have a question. Is the button to pair the controller a loose button or is it tight? The same button on the Elite Controller is a loose button. Why i ask that? The button on the Elite Controller rattles when shaken. Thank you for the answer.
@beeumber1985
8 ай бұрын
The finish should be tight
@81stCommander
2 жыл бұрын
You didn't show how to remove the sync button.
@AlexisSaavedra-q3g
10 ай бұрын
I don't get it I have a t6 and t8 same controller.and.did not work
@yahirgarcia4386
Жыл бұрын
Does anyone know how to fix right joystick so I can Crouch/prone
@iddocacete
Жыл бұрын
Thanks so much!
@ALAYZA1000
2 жыл бұрын
I just want to swap the a b x y buttons from my Xbox one controller. Would they fit in the new series s/x controller?
@CockyDiesel
5 ай бұрын
If they don't just sand them down
@MGlennan
2 жыл бұрын
0:39 YOU MONSTER
@fabiocelesia51
Жыл бұрын
Ciao ho smontato il pad perché non dà segni di vita ma quando stacco l'antenna sinistra riprende a funzionare sai il perché? E che funzionalità avrebbe questa antenna? Grazie
@bekahc4376
Жыл бұрын
My triggers aren’t working now. How can I fix? They aren’t sticking just not working.
@bekahc4376
Жыл бұрын
Figured it out
@nickjones316
10 ай бұрын
What did you do I couldn't get mine to work either
@DefinitelyNotMyRealName
Жыл бұрын
Sounds like a combo of multiple Simpsons characters
@Afdog
Жыл бұрын
Damn guys you disassembled the whole controller, but didn't torn apart analog sticks module - the reason of the kost frequent problems with stick drifts. Well that's kinda... Odd I'd say. The video helped me remove the pads though lol
@Icy-Light
2 жыл бұрын
Thanks
@gsboonedox9883
Жыл бұрын
I love the speed of the actual assembly and reassembly. A tad faster please, I was 4 steps ahead the entire time. Oh wait, if I'm an expert, then why do I even need this video?
@Personthatexists23
Жыл бұрын
Don’t know about you guys but the back panels of my controller just will. Not. Come. Off. No matter what
@kingofthedarkarts599
2 жыл бұрын
i was doing a button/trigger replacement and now the triggers aren't working. any advice?
@bekahc4376
Жыл бұрын
Did you ever figure out how to fix it? I’m having the same issue.
@kingofthedarkarts599
Жыл бұрын
@@bekahc4376 for me it’s a stick issue, my controller had a lot of abuse by the previous owner. So now I gotta re-solder a new stick. Though if it happened after you you did the replacement, a bit of dust might have gotten in, I suggest you scrub it with 91% isopropyl alcohol and a new tooth brush.
@bekahc4376
Жыл бұрын
I ended up figuring it out. I was playing with the old pieces and realized the new piece didn’t have the magnets in it 🤦🏻♀️I’m just glad it was a simple fix!
@x115Outcastx
Жыл бұрын
Im hoping someone can help me. Ive taken apart a few xbox one and one s controllers with no issue. The series x on the other hand i have one problem. The 2 black antenna cable will absolutely not click back in place. Ive lined it up countless ways. Literally spent hours trying. Anyone have any idea? The one s controllers had the same cables and it was easy to click back in place. Thanks in advance. Without those in my controller cant hold a connection to the xbox.
@bxfinest271
Жыл бұрын
Hey I had the same issue. What I did was put the wires back onto the contact point and tape it it there with black insulation tape. Make sure it’s touching the contacts before putting the controller back together. If you can solder it back even better.
@charlbothma6265
2 жыл бұрын
How do I fix the antenna coupling.. Mine came loose
@klerzz
2 жыл бұрын
Same
@HunterM430
2 жыл бұрын
Hey man, my b button works but only with some decent pressure, any idea what it could be? I just got it refurbished thru gamestop and it has a really weird color pattern that id like to keep so i dont want to return it
@Tetragramix
2 жыл бұрын
Clean the metal contact on the motherboard. Worked for mine.
@vxpro1
Жыл бұрын
Probably some dust under the button
@q-him3163
17 күн бұрын
5:51 Nah, bro lives in a multimillion dollar masion
@Anjelmeno1979
11 ай бұрын
very good ❤❤❤
@biggoronmusic
2 жыл бұрын
Yes!
@tyleralexander5148
2 жыл бұрын
What else can I use besides some fancy screw driver that normal people don’t have to unscrew those first screws?
@Tetragramix
2 жыл бұрын
You have to use the Torx driver bit for Torx screws.
@T.J.GoOutside
5 күн бұрын
All for a headphone jack
@cronus8773
2 жыл бұрын
Does a t9 screwdriver work?
@dt4jt
Жыл бұрын
No
@nowa9346
2 жыл бұрын
ty
@mfloydj
Жыл бұрын
why do you sound like that
@FerlandiG
5 ай бұрын
Literally know until now that the T8 and T6 sized screws are SAFETY screws. What the f xbox.
@werther9698
7 ай бұрын
L and RB bottone are the most idiot buttons I've ever seen... always broken
@SubhrajyotiAcharyyaDSB
2 жыл бұрын
how do i remove the sticks? just pull it off?
@sechmachine
2 жыл бұрын
Yep
@majordime8926
Жыл бұрын
phhhht you poured a liquid on porpoise
@kimdyer2288
9 ай бұрын
Porpoises LOVE water!
@shoinmoox
2 ай бұрын
Bruh, need t9 not t8
@Zeketheeditbeast_TC
Ай бұрын
Fr
@MikeV671
2 жыл бұрын
So I’m having trouble finding the right tool. I supposedly have a torx T8 yet it seems too big for the nut. Idk but it seems like it’s a completely deferent nut than a T8. Any thoughts? Oh and my controller is a Xbox Series S
@Inuyuski
Жыл бұрын
Same, this problem is annoying, Microsoft needs to stop
@asmodeuso6
Жыл бұрын
Same here. Did you manage to open it?
@MikeV671
Жыл бұрын
@@asmodeuso6 actually it’s not just any Torx screw it has to be specific to the Xbox. The Torx tool it uses has a slight gap at the end tip of the tool, that’s why regular Torx tools are not fitting
@MikeV671
Жыл бұрын
@@Inuyuski I ended up just buying a new controller, since there’s no more Game Stop to buy a specific Torx tool for the controller
@YurymBR
Жыл бұрын
@@MikeV671 I used a standard torx screwdriver kit I bought from China :)
Пікірлер: 177