How to setup 2 different door stations like a front and back door, and 3 indoorstations 1 per three floors.
@sayhongtan8993
Жыл бұрын
Awesome video! Is it possible to view the Door unit KH8003-IME1 via HikVision mobile app if the PoE switch is not connected to the router? Meaning to say, the Door Unit KH8003 and the KH6320 are in a network by themselves with no connection to the Internet.
@DCEDistributionSdnBhd
Жыл бұрын
sorry cannot. cannot get any notification at the mobile apps, when ur device no connected with the router. but, if ur mobile and device in the same local network, and you didn't leave that environment, u can through the local area network get the notification, on condition that you can't leave that place.
@sayhongtan8993
Жыл бұрын
@@DCEDistributionSdnBhd okay thanks for the detailed reply bro.
@engHazemRaafat
2 жыл бұрын
Can 2 intercoms (Door station) be connected to this indoor unit?
@DCEDistributionSdnBhd
2 жыл бұрын
sure, can Max can connect 2 outdoor.
@mcRafen
3 жыл бұрын
Hi, very interesting video. Do you know if is it possible to remove the audio message "The door is opened" when unlocking the door? . Thank you
@DCEDistributionSdnBhd
2 жыл бұрын
hi, you can try adjust the prompt sound volume in the Volume Settings.
@Stop-asking-for-handle
Жыл бұрын
My model/version had a switch to enable the verification code but it didn't show any. Turns out there is an input box right next to the switch where you have to manually input a code. It's invisible so just press a little to the left of the switch. Nearly lost my mind over this
@DCEDistributionSdnBhd
Жыл бұрын
Great, Thanks for sharing, let people who don't know know better
@farhodsaidahmedov1225
Жыл бұрын
Can you clarify how to get verification code? Mine either not showing the verification code
@Stop-asking-for-handle
Жыл бұрын
@@farhodsaidahmedov1225 you have to type one yourself. Like I described, there is an input box but it's invisible. It appears to have a toggle switch all the way to the right of the display on the same line as the verification code. Tap just a little to the left of that switch and if correct, an input keyboard should appear where you just type whatever you want.
@gye4660
2 жыл бұрын
Hi! Can i do this without poe switch too?! I built in the indoor and outdoor unite yet…. By Wired connection… everything is working just a cant use the system with app!!! I can use it onlie!!!
@DCEDistributionSdnBhd
2 жыл бұрын
sure, indoor & outdoor units can work without PoE Switch, but u need find 12VDC to giv device power. outdoor station must connect with RJ45 cable connect to network switch, indoor station can support Wifi or RJ45 connection.
@daviddelew
2 жыл бұрын
Hi, does this unit or any of the Hik indoor stations work on Wi-Fi. Looking to connect the external intercom doorbell via cat 6 but didn’t hardwire where internal station will be situated. Will connect all to my Hik NVR
@DCEDistributionSdnBhd
2 жыл бұрын
hi, if indoor station, DS-KH6320-WTE2 this model supported wifi.
@anahenriques8870
6 ай бұрын
@DCEDistributionSdnBhd ,hi I have the exact one on the video but can't get it configured, I'm missing SIP don't know what letter or numbers to put down to register it...also I got my device in uk but installed it in my house in Portugal does that impact its functioning? I'm desperate help me.
@amedeetje
8 ай бұрын
the device is all of a sudden no longer visible in the hiksconnect app. I have to add it again but if I go to the indoor station, the button ‘Hik Connect Service Settings’ is not there so I cannot find the QR code to scan it in order to add the device. What can I do?
@DCEDistributionSdnBhd
7 ай бұрын
indoor station connection by wifi or wired?
@amedeetje
7 ай бұрын
@@DCEDistributionSdnBhd I believe it’s wired.
@rabihsaghbiny4143
Жыл бұрын
hello, how do i can open my sliding door form the indoor unit please? it is going to be a free voltage contact?
@thegeneral9370
2 жыл бұрын
Does this system have motion detection ? Can you improve the quality of the image as my picture quality is not very good.
@DCEDistributionSdnBhd
2 жыл бұрын
hi, device cannot support motion detection, i think model this 2mp video quality is good enough already.
@thegeneral9370
2 жыл бұрын
@@DCEDistributionSdnBhd apparently you can have motion detection if you connect a dvr or some sort of storage device to the doorbell.
@DCEDistributionSdnBhd
2 жыл бұрын
@@thegeneral9370 yah, if you connect with DVR/NVR as do, actually this device does not have motion detection function.
@captainzeppos
Жыл бұрын
Any idea if this has a web interface as the doorbell does? Trying to access it via IP doesn't work, it doesn't accept the connection. However it does appear online in Hik Connect, SADP tool etc
@davidsilveira198
2 жыл бұрын
Hey there, What would work for a rural setting. In which the gate is at the entrance of the property. We have a shed that has internet and electricity 30m form the gate, and our house is 150m from the shed ( 180m from the gate). We would like video intercom, with the option of locking ,unlocking the gate, mobile phone compatibility and a key pad at the door.
@DCEDistributionSdnBhd
2 жыл бұрын
this behavior is not recommended, because you are already over 100m away, i don't think the signal can reach so far.
@steveking5055
2 жыл бұрын
I set up a system for something similar, over 280m, using wi-fi
@DCEDistributionSdnBhd
2 жыл бұрын
@@steveking5055 If you are using WIFI, and the signal is sufficient and stable. i think is ok. pls try using computer and install hikvision SADP Tools, try can find Indoor and Outdoor station or not.
@carlosjuskoski7424
Жыл бұрын
Hola, en caso de corte de luz. ¿Cómo puedo alimentar el switch poe?
@DCEDistributionSdnBhd
Жыл бұрын
good question, please prepare a UPS for supply PoE switch power when power down.
@asatpteltd4563
Жыл бұрын
How many main units we can add into indoor station?
@DCEDistributionSdnBhd
Жыл бұрын
hi, 1 outdoor can link with 18nos indoor station.
@KeithButler
Жыл бұрын
Will the display be compatible with a Hik Vision NA-KB6013-WIP doorbell camera?
@ahadraza2299
Жыл бұрын
Can we attach an external bell with this device
@DCEDistributionSdnBhd
Жыл бұрын
In logic, there is no problem, connect ur bell to indoor station relay output.
@abdullahaygun8262
Ай бұрын
Hi, when check the door station live view from the indoor station, I meet the error "Connection time out , Make sure the video source Ip/Port is correct. Error code: 10200.When I unolug the socket on the poe switch and plug it again the live view is Okey. You can help me to solve this problem,
@kostpan7571
Жыл бұрын
Hallo with model that has wifi (2wire) with dhcp it does not get ip automatic...if i enter it and gate ip same..it connects but after some minutes it disconnects from the outdoor?
@alladyn21
2 жыл бұрын
Hi, Can you open a gate or door using this screen? I have DS-KV8213-WME1 intercom with two outputs but unfortunately from the display level I can open the door only
@DCEDistributionSdnBhd
2 жыл бұрын
hi, open door i think no problem, but a big issue is want open gate.
@mbzumzum500
3 жыл бұрын
very interesting video..thanks but please help me configure the system with 2 outdoor units and one indoor..I can't ... connect it ... I always have a call from one
@DCEDistributionSdnBhd
2 жыл бұрын
hi, you can waiting and follow the video below, thanks kzitem.info/news/bejne/p6mQ1matiYp2ZII
@JuliusKuk
2 жыл бұрын
@@DCEDistributionSdnBhd No its about two indor monitors. How about two door bels and one monitor?
@MrM1LL0
Жыл бұрын
Tu sabes como deshabilitar el aviso por voz cuando no hay nadie en casa?
@kajemberamadhan8317
2 жыл бұрын
how to I connect two monitors to one door station
@DCEDistributionSdnBhd
2 жыл бұрын
hi, u can watch my video link as below kzitem.info/news/bejne/p6mQ1matiYp2ZII&ab_channel=DCEDistributionSdn.Bhd.
@Mic0m4N
Жыл бұрын
I own two of these indoor units. Too bad that there is no option of changing background or theme. Text (Call, Message, Live View, Settings) is barely visible. White on white, come on.
@joshwolff4223
2 жыл бұрын
what does it mean when DHCP wont stay on? thank you
@DCEDistributionSdnBhd
2 жыл бұрын
i think fix your IP will better u using DHCP, Because the ip priority depends on the connection order of the device, may indirectly affect the stability of your connection
@theonlypman
Жыл бұрын
@@DCEDistributionSdnBhd Any chance of a step by step for this? in simple language please.
@AndreasLeon82
2 жыл бұрын
For some reason door station unit is not found it says no device found. Although it is connected to port 6 and powered. Any ideas?
@DCEDistributionSdnBhd
2 жыл бұрын
may i know your indoor & outdoor unit distance between?
@AndreasLeon82
2 жыл бұрын
@@DCEDistributionSdnBhd Distance between indoor and outdoor units is approximately 10 meters. Also distance between indoor unit and power supply unit is 7 meters and from door unit 3 meters. Thanks for the quick response!!!
@DCEDistributionSdnBhd
2 жыл бұрын
@@AndreasLeon82 you can try to use Hikvision SADP Tools (PC) seacrh and configure indoor and outdoor unit. Because i'm not sure there is a problem with the previous steps.
@laveshtyagi4234
2 жыл бұрын
Please check IP address are they in network of same IP series, from laptop ping both units properly or not
@KeRatniK
2 жыл бұрын
You need to link indoor unit with outdoor unit. IP addresses need to match. From watching this video I'm confused on how the outdoor unit automatically rang. I have DHCP enabled.
@hyperspaced77
9 ай бұрын
Hello, how do I browse a simple web page?
@DCEDistributionSdnBhd
5 ай бұрын
hi, as i know hikvision indoor station cannot access by web page.
@swralas5229
2 жыл бұрын
Hello, what is the default password on the device?
@DCEDistributionSdnBhd
2 жыл бұрын
the number you entered when you first activated the device.
Жыл бұрын
@@DCEDistributionSdnBhd how can I reset that password?
@bolajibigj4214
8 ай бұрын
To reset if you forgot the password u changed initially, go to their nearest office for default reset
@anahenriques8870
6 ай бұрын
How to I know the SIP password to register??? Need help please
@DCEDistributionSdnBhd
5 ай бұрын
1. Tap Settings → → Configuration , and enter admin (activation) password. 2. Tap SIP Settings in Local Information Page. 3. Set SIP registration password. 1) Tap Registration Password. 2) Create a new SIP registration password and confirm the password. 3) Tap OK.
@MohsinBhaiDesi
2 жыл бұрын
Hi i don't found it verification code there only option for enable anf and disable how can i get it
@DCEDistributionSdnBhd
2 жыл бұрын
hi, did u find any QR code sticker in your device?
@grassrootsfives
2 жыл бұрын
@@DCEDistributionSdnBhd I have the exact same issue... No verification code is shown on the indoor station a a toggle enable/disable option... any ideas? there is no verification code on the back of the device either
@DCEDistributionSdnBhd
2 жыл бұрын
@@grassrootsfives hi, please make sure ur device already online, verification code will not show if ur devices no online.
@grassrootsfives
2 жыл бұрын
@@DCEDistributionSdnBhd thanks for the reply guys, worked it out in the end… the latest firmware doesn’t come with a preset verification code, you have to tap on the screen just to the left of the toggle switch to disable/enable and it then allows you to type your own verification code to use. Hope this helps others out there struggling to work it out as well
@endreszigethy5704
2 жыл бұрын
@@grassrootsfives thanks a lot, it works now. It must be a 6 digit code, 4 was not accepted to me.
@giorgiomaiolino1122
7 ай бұрын
ciao puoi fare un video su come collegare il mio citofono all’app grazie
@DCEDistributionSdnBhd
7 ай бұрын
hi, u can watch kzitem.info/news/bejne/1oKpqWGLg55ogGk this video, start from 1:48
@giorgiomaiolino1122
7 ай бұрын
@@DCEDistributionSdnBhd puoi fare un video anche su come reimpostare la password del citofono?
Пікірлер: 77