Thank you very very very much. I was able to play " The House of the Dead 2" for pc with my wiimote as a light gun. You just saved me at least $300 I have a Frankenstein set up but it works beautifully.
@OldsXCool
7 жыл бұрын
There's absolutely nothing wrong with a Frankenstein setup. That's pretty much the only way I roll.
@ArtificialFear
7 жыл бұрын
Howdy! I just wanted to say thanks for this video. I knew about Touchmote, but I couldn't get it going for anything! This was very helpful. Cheers!
@DungarooTV
5 жыл бұрын
Get a Dolphin Wii Bar and run the wiimotes this way.
@Eurocar-yz4kv
8 жыл бұрын
Wow big big thanks to you for doing this... I finally got it to work:) works great the only flaw im noticing is when i play area 51 the shoot of the screen reload takes a while to reload... Everything else works great... Thanks again i much appreciate you!
@OldsXCool
8 жыл бұрын
You're very welcome. I'm always happy to help :)
@Omn1Slash
6 жыл бұрын
Thank you so much! I fought with this for hours and watched your video and figured it out. Touchmote saved the day on this one. Gonna try and setup 2 wii remotes for dual guns!
@OldsXCool
6 жыл бұрын
Glad I could help ☺️
@papas7104
4 жыл бұрын
Thanks a lot for your guide.
@neogeoaes1627
2 жыл бұрын
awesome video thank you!!! now its time for some crypt killer!
@karlmee1234
4 жыл бұрын
Legend, thanks for the help mate. One question though, my cross hairs seem a little jumpy, does changing the deadzone in MAME fix that and does that affect my arcade cabs sticks if I mess with the deadzone?
@Patrick19833
4 жыл бұрын
It's not working for me. I push a button on my wii remote for p1 Button 1, but it's not registering.
@georgeherman856
4 жыл бұрын
I just watched your video and got everything working. Thanks for the video it helped a lot. I have one issue, if you can imagine a big plus sign on the screen...everytime my crosshairs get to that invisible plus sign the crosshairs stop even if I keep moving the gun, up or down. Then once I keep moving the gun enough the crosshair catches up. Do you know why that would happen. It happens in other games as well. Thanks
@bmontano71
3 жыл бұрын
Thanks 🙏 for the tutorials, much appreciated. I am having trouble setting up reload on Mame games. Trying to play, INVASION THE ABDUCTORS, have it working good minus the reload. Using a Wii mote with the mayflash dolphin bar running from a desktop pc. Any ideas on how to set up reload?
@nyrand8249
3 жыл бұрын
There is no input at all in Mame. I press the trigger, I move the Wiimote, I try more than one Wiimote, I try dolphinbar and a regular Wii sensor bar... nothing. I'm using Mame 0.224 on Windows 10 btw. Also, under "Pointer Settings" in Touchmote sometimes "Monitor" says "Requires driver". I've tried it on my laptop monitor and my television screen and the results seem to vary.
@jacake
4 жыл бұрын
My crosshair on Area 51 ( haven’t tried other games) is stuck in a cross motion. Like if I try hard enough I can get it moving freely but then it gets stuck in a up and down and left in right straight motion
@charlesyates159
7 жыл бұрын
Can you use two WiiMotes as lightguns for MAME? If so, how?
@ragetasticgames5105
7 жыл бұрын
it is possible, but the information is scattered so good luck.
@joeclifford2896
7 жыл бұрын
www.google.com.au/url?sa=t&rct=j&q=&esrc=s&source=web&cd=5&ved=0ahUKEwid6Jrb-oXUAhWFoZQKHSg6B2gQFggxMAQ&url=http%3A%2F%2Fforum.arcadecontrols.com%2Findex.php%3Ftopic%3D89378.0&usg=AFQjCNEoroIaE4cHSLzEo5kgAgln6ZmyPA&sig2=ngQvV_NT--ZZSbdRjqOsPQ This help?
@JohnSmith-qn3ob
7 жыл бұрын
You should be able to, turn on "multi mouse" in Mame
@DungarooTV
5 жыл бұрын
@@joeclifford2896 I've tried everything. It's not possible. If you discovered how please let me know too!
@KennyD3215
6 жыл бұрын
Would you know how to setup the wiimote the same way for ps1 and ps2 emulator? Thanks
@khmerdogg71
7 жыл бұрын
I follow the step and it worked fine, but the sensor and crosshair are way off. I'm pointing in the center of the tv but the crosshair is about 5 in below that. any way to correct the aiming?
@ozltorres
6 жыл бұрын
Whats up! Dude!... Nice Tuto, very well explained and it worked for me.... NOW i Have a question, HAVE YOU TRIED TO PLAY WITH 2 PLAYERS (2 WIIMOTES) ? In case yes, could you explain what is the settings that you used in TouchMode please.
@OldsXCool
6 жыл бұрын
ozltorres Yes. And it's super simple. All you have to do is sync up another Wiimote to the Touchmote software. Then when you go into MAME just use the second Wiimote to program the controls for player 2.
@ozltorres
6 жыл бұрын
OldsXCool i tried to do that but first of all i dont know which key configuration use in TouchMote for the player 2... should i use the same key condig as the player 1? because when i will chech the input options in touchmote just appears one xbox control. is it normal or should appear 2 of them (one for player one and one for player 2)?
@OldsXCool
6 жыл бұрын
ozltorres Yes that is normal for there to appear 2 Xbox controllers because the Touchmote software is emulating two of them when you sync up 2 Wiimotes. You don't need to change anything in Touchmote at all. Just sync up both Wiimotes and program your controls for each in MAME.
@ozltorres
6 жыл бұрын
Ok, thanks dude! I have to check why in my TouchMote just Appear ONE xbox controller, not 2 as you said. Regards
@OldsXCool
6 жыл бұрын
I just double checked by syncing two Wiimotes up to my computer and I indeed have 2 XBOX 360 controllers listed in my "Devices and Printers".
@ConversusVans
7 жыл бұрын
Do I need a Motion Plus adapter (or a newer Wiimote with M+ built-in) to use the Wiimote as a mpuse/for light gun games? I have ordered a Mayflash Dolphin Bar to use with my laptop.
@J-shelby
6 жыл бұрын
Hi, wich versión of mame do you use? I can put the layout of joystick in touchmote and do not move mouse in desktop, but do not recognice in mame. I have to put something special in mame config like mapping control like lightgun or mouse ? Because input in this machine do not responde nothing of Wiimote inside mame. Thanks a lot
@Vidal2021
7 жыл бұрын
Thanks for doing this video. I used a dolphin bar as the Bluetooth dongle was dropping the more and would only sync one. It works, but It's nowhere near the ps2 gun on setup I used years ago on my original cab. I'm your other video your setup seems to work flawlessly. it would be awesome if You could do a video taking us through the steps to get our setups working like yours or close. thanks.
@OldsXCool
7 жыл бұрын
VD2021 Sorry it took so long for me to respond. I have switched to a newer computer and had to set it up in order to confirm some things. In order to use more than one Wiimote all you have to do is sync up a second Wiimote with the software. You have to sync them up at the same time though. You can't simply add a Wiimote when you hit "pair" because it disconnects all current connections with any Wiimote you had previously paired. So select pair and pair them both when the software is scanning for Wiimotes. You don't have to do anything other than that because MAME will see each Wiimote as different controllers. As for having to sync them up every time, you should not have to do that unless you've unpaired them by pairing the Wiimotes with something else like Wii console or if you've rebooted the computer. My. Computer runs 24/7 so I never have to pair my Wiimote again unless I did one of the above mentioned things. Even if you close the Touchmote software you don't have to pair the Wiimote again. Just simply open the software and then hit a button on the Wiimote and it will connect automatically. Another thing is that you can leave the software open and the Wiimotes will stay connected and go into a sleep mode if not used after so long, but this sleep mode will still kill your batteries so I don't recommend it. I don't know anything when it comes to the Dolphin Bar because I don't have one. I'm using a cheap Bluetooth dongle and my actual Wii sensor bar. I know that the Dolphin Bar has 4 different modes and you need to have it set to the correct one, but I don't know what that is. If you need more illustration after this post I'll try to get around to making a video showing my setup, but my time is limited when it comes to making videos.
@OldsXCool
7 жыл бұрын
VD2021 Sorry it took so long for me to respond. I have switched to a newer computer and had to set it up in order to confirm some things. In order to use more than one Wiimote all you have to do is sync up a second Wiimote with the software. You have to sync them up at the same time though. You can't simply add a Wiimote when you hit "pair" because it disconnects all current connections with any Wiimote you had previously paired. So select pair and pair them both when the software is scanning for Wiimotes. You don't have to do anything other than that because MAME will see each Wiimote as different controllers. As for having to sync them up every time, you should not have to do that unless you've unpaired them by pairing the Wiimotes with something else like Wii console or if you've rebooted the computer. My. Computer runs 24/7 so I never have to pair my Wiimote again unless I did one of the above mentioned things. Even if you close the Touchmote software you don't have to pair the Wiimote again. Just simply open the software and then hit a button on the Wiimote and it will connect automatically. Another thing is that you can leave the software open and the Wiimotes will stay connected and go into a sleep mode if not used after so long, but this sleep mode will still kill your batteries so I don't recommend it. I don't know anything when it comes to the Dolphin Bar because I don't have one. I'm using a cheap Bluetooth dongle and my actual Wii sensor bar. I know that the Dolphin Bar has 4 different modes and you need to have it set to the correct one, but I don't know what that is. If you need more illustration after this post I'll try to get around to making a video showing my setup, but my time is limited when it comes to making videos.
@Vidal2021
7 жыл бұрын
Thanks. I had ordered some new Bluetooth dongles. The new dongles came with the blusolei and I can sync two wiimotes without issue. I have a 4-player arcade cab that I use with a jvc crt I purchased back in 2003. I also added a setup to my HTPC which uses a 55" Samsung or Acer projector. Here's my latest, as I try to get both arcades working with the wiimotes. I am using the dongles and not the dolhpinbar. The crt setup is more accurate relative to the onscreen cross-hairs. The setup on the Samsung is off. the shot lands to the left of the cross-hairs. In touchmote sw pointer settings, the sensor bar potion does not do anything. The aim is only accurate if I place the sensor bar at the center of the crt. With it on top, the cross -hairs are below the aiming point and with the sensor bar below the cross-hairs are above the aining point . I have three different, battery operated, independent of wii sensor bars. All of them give the same results. Have I missed something? I noticed that the touchmote sw pointer settings, on the crt, doesn not give a "monitor selection" in the drop down. Its blank. On my Samsung it's there and selectable.
@OldsXCool
7 жыл бұрын
There is absolutely no way in the Touchmote software to adjust the pointer position in MAME. This is because in MAME you are not using a real pointing device such as a mouse, but instead using joystick input so the cross-hairs in MAME will always be at the center of the screen when pointing directly at the sensor bar. The only way to remedy this as you have found is to place the sensor bar in the center of the screen which is actually doable on a projector setup and not so with a direct view CRT or LCD screen. Not even the sensor bar position adjustment does anything for MAME lightgun games. The sensor bar position only makes a difference for the mouse and touch modes. If you want arcade type precision you'll need something like an Aimtrak gun that works exactly like the Wiimotes but has software to be able to calibrate the aim outside of MAME. I'm not sure what the reason is for the shots landing to the left in your projector setup. It could be the distance in which you're away from your screen in each respective setup. You can try adjusting the analog joystick sensitivity in in the ini file to see if that helps. One thing to consider is that other light sources can be interfering when ever you have inaccurate aiming with a Wiimote. I've found the morning sunlight from my windows in the basement to be a huge problem and that is with the blinds closed. Even the overhead lights in my room cause issues. As for the Touchmote software not seeing your CRT, if you're using an s-video or composite output it won't see it. If you're using a computer monitor hooked up VGA theirs a chance that it still can't see it. Whenever using DVI or HDMI you should always see it.
@Vidal2021
7 жыл бұрын
Thanks. The CRT is using the S-video input. I may try to add some tilt, to the wiimote, relative to the wiimote gun holder. If I played by only looking at the cross-hairs it wouldn't be an issue, but I actually look over the sights, to aim, and its takes away from the experience having the cross-hairs separated from the sight's aim.
@dmcalonan1359
5 жыл бұрын
you didnt mention what you have your mame default set at for lightgun, etc. for wxample MameUI, default controller for each input set as mouse by default. I didnt use touch remote at all, I set dolphin bar on mode 1, set mame to use mouse for lightgun games and it works without doing any of this. the mouse is to fast though so you slow it down. thats it.
@OldsXCool
5 жыл бұрын
That doesn't work if you want a second lightgun as your computer recognizes only one mouse input. You would need 2 completely independent mice which Windows does not nativlely support. I still don't have a Dolphin bar because I've never really needed one, but the method that I show here might work without the Touchmote software using mode 3 on the Dolphin bar. That's just speculation though.
@hamzasale2651
5 жыл бұрын
I can get wiimote connected to touchmote, but when i get to the button input config bit, i push wiimote trigger and nothing happens in mame. Cant map wiimote trigger! And what has the xbox 360 control have to do woth this?
@danieldostalik656
7 жыл бұрын
Nice work, got a question. In Xbox controller mode I cannot reach far left and right areas in MAME. Tried to make work the Mouse Mode, but MAME refuses to map to this mode. Any idea why is that? Mouse seem to be accurate in Touchmote and on Windows desktop. Im puzzled :) PLZ help
@michael-707
5 жыл бұрын
Yes!! Thank you.
@fg1998
5 жыл бұрын
Sadly but does not work for me on 0.179 - I dont get 'Joy 1 x rotation' but 'Joy 1 RSI' and never work.
@LordBarko
6 жыл бұрын
I still cannot get this to work. Windows 10 doesn't seem to recognise the device as an Xiput controller.
@pattonthompson4781
7 жыл бұрын
Im using MAME .174. I followed the instructions precisely. It works but the cursor jumps all over the place. Is there some setting or calibration I am missing? I dont think light interference is an issue, on the appropriate dolphin bar setting the mouse motion is smooth in windows.
@OldsXCool
7 жыл бұрын
Patton Thompson Sorry I just looked at the video and it says that I'm actually using MAME 0.171. That doesn't matter though because this should work on either version. I think I've seen someone else make a comment here on the same thing and they were using the Dolphin Bar just like you. I'm not sure which one of the settings on the Dolphin Bar is best to use with Touchmote. You may have conflicting inputs between Touchmote and the Dolphin Bar causing the irattic behavior. That's all I can really think of.
@gamedude6322
4 жыл бұрын
How would i make it so if i was running a frontend to launch emulators it would the right profile for that emulator?
@Vidal2021
7 жыл бұрын
Thanks for the great instruction. Hoping you can help me with an issue. My pointer pauses or gets stuck at the dead center when I cross the center line. It doesn't matter if it is high, low or somewhere in between. It still gets stuck for a moment. Is there a fix?
@OldsXCool
7 жыл бұрын
Yes there is a fix for that. Go into your MAME.ini file, scroll down to where it says "joysick_deadzone" and change the value to 0.
@xpectz
4 жыл бұрын
I can't program Light gun X and Y. The wiimote is nonresponsive. The buttons work however. Any idea?
@OldsXCool
4 жыл бұрын
Make sure your sensor bar is on.
@xpectz
4 жыл бұрын
@@OldsXCool Yeah it had to be on mode 4 for the dolphin bar. Now I am having a problem with touchmote...it keeps assigning the wiimote a different gamepad # and messes up all my configurations. Any idea how to fix/prevent this?
@OldsXCool
4 жыл бұрын
@@xpectz Sorry I don't have a Dolphin bar.
@yogurtstand1776
4 жыл бұрын
So I accidentally Disabled The pointer and now I can't slide the left xbox360 configuration input into the program. Can someone plz help me.
@Machelloo
5 жыл бұрын
Hi Mate, I followed your tutorial and got almost everything working. The shooting button works but I can't set X and Y axis with swiping my controller (gun). I use a dolphin bar in mode 4. What am I doing wrong? Thanks in advance!
@OldsXCool
5 жыл бұрын
I don't have a Dolphin bar, but I've looked up the modes and mode 4 is for using a Wiimote with the Dolphin emulator. From what it looks like you want mode 3 where it emulates a gamepad. Try mode 3.
@Metalvain4
7 жыл бұрын
Hello, I got it "working" but when I shoot something, it is off by about 5" from the reticle. The games are unplayable. It seems to do this even when using a mouse so I think it's a MAME issue. Any idea? Thanks!
@OldsXCool
7 жыл бұрын
Chad Linthicum What version of MAME are you running?
@chrissre7935
Жыл бұрын
my touch mode says only EXIT when it is at the taskscreen really shity app if it dsnt tell you what your doing wrong.
@chiefflash
5 жыл бұрын
hey brother. thanks for the video. so i'm trying to get this to work with Terminator 2 arcade, but i cannot get the X and Y analog to work like you did for Lethal Enforcers. I press ENTER and do the sweep motion, but pressing ENTER doesn't do anything. please advise.,
@chiefflash
5 жыл бұрын
hey i figured it out thanks! my sensor bar was not working properly! this shit is awesome!
@fielrg01
5 жыл бұрын
What version of mame are you using? Touchmote is working, but whenever I'm in mame and push a button on the wiimote it turns off. What can I do to fix this? I'm using Mame .208.
@OldsXCool
5 жыл бұрын
What turns off? The Wiimote?
@fielrg01
5 жыл бұрын
@@OldsXCool Yeah my wiimote completely shuts off and disconnects from the pc. I've tried a wiimote with motionplus and it stays on, but I'm not able to configure any buttons.
@OldsXCool
5 жыл бұрын
It sounds like you may have a conflict of some kind. That sounds like what happened to me when I was trying to use Dolphin with Touchmote open. Dolphin does its own syncing and Touchmote was fighting for connectivity. You need to check all of your connected Bluetooth devices and make sure that there are no doubles and no other program trying to take control of the Wiimote. MAME itself does not control any of the Bluetooth devices. You also may want to shut off any other Bluetooth controllers if you have multiples just to eliminate them as being a problem.
@TaylorMade085
7 жыл бұрын
I followed your instructions and everything works as intended until I attempt to remap a control in Mame. It won't register the Wiimote's buttons of directions when I try to remap controls. Are there any other steps involved? Thanks!
@ArtificialFear
7 жыл бұрын
I was having the same problem. Apparently, I had downloaded the Windows 8 version of Touchmote (I'm running Windows 7.) I uninstalled the wrong version of Touchmote, downloaded the Windows 7 version, and then it worked like a charm. Give it a shot, and see if that works for you!
@TaylorMade085
7 жыл бұрын
Thanks for the tip. I'm running Windows 10. Not sure if that's an issue or not. I don't see a Win 10 version (using Win 8 version). Curious if anyone else has been successful with this in Win 10. Thanks again for the response.
@manlydesmond4925
7 жыл бұрын
SAME ANY LUCK
@davegrams7375
7 жыл бұрын
Followed the instructions. Works... but... the cursor when using the wii remote in a game wants to pause when hitting center of screen. Like if I am moving up and down ... the cursor will stop or pause at the center half of screen... I have to move gun around to get it to go up. Then when I move the cursor back down and hit the center area of the screen, the cursor then again pauses or locks at the half way point of the screen before it lets me go down. thoughts?
@OldsXCool
7 жыл бұрын
Go into the MAME ini file and change joysick_deadzone to 0.
@jamesferguson7800
7 жыл бұрын
this was very helpful!!!!
@pattonthompson4781
7 жыл бұрын
Awesome video. I am stillHaving trouble. Could you share what version of MAME you are using and your mame.ini file? Would be much appreciated.
@OldsXCool
7 жыл бұрын
I'm using version 0.182 in this video I think. What are you having trouble with?
@necropod5188
7 жыл бұрын
hey dude...no matter what i do my dirrections are all messe up ...left is going to top corner ect.
@jrobertsz71
6 жыл бұрын
Thank you.
@conejo013
4 жыл бұрын
What did you config buttons one and two
@aceuno
7 жыл бұрын
I just got a DolphinBar and the native mouse support shakes like hell, so I've been looking for a workaround. Your Touchmote method seems to work a lot better, Touchmode takes care of the shakyness, but I've encountered a new problem... the cursor tends to get stuck or stopped at the center axis of the screen in most games. Does this have to do with the "auto-center" function that MAME does when using analogues as lightgun? Is there a way around it?
@OldsXCool
7 жыл бұрын
Yes, I know exactly what you need to do. You need to go into the MAME.ini file and adjust the "joystick deadzone" to 0. I think it's defaulted to 0.3. That will fix your problem.
@aceuno
7 жыл бұрын
That worked perfectly, thank you so much! This singlehandedly turned my DolphinBar into something actually usable, I'm very very grateful! The only detail that's bothering me now is that offscreen reload doesn't work all that well for me on games that use it. Area 51 only registers my offscreen shot if I move rather slowly towards the edges (if I move to fast offscreen, the cursor stays behind). Any advice for that?
@aceuno
7 жыл бұрын
I realize there is a "offscreen_lightgun" property in the mame.ini, which should let you map an offscreen shot to a button, but I haven't been able to map it. Seems to be strictly reserved for devices that MAME recognizes as real lightguns, for some reason.
@fraserkinloch3765
6 жыл бұрын
azulo How did you set up your dolphin bar to work, what mode do you use? I have one and got the buttons to work but not the pointer.?
@buffalo7169
5 жыл бұрын
@@fraserkinloch3765 Same here.. was this ever figured out? Thanks
@MrZeus305
6 жыл бұрын
Hey I have dolphins bar from Amazon I dont have any software that came with it an am having trouble in mame the crosshairs move normally just when I shoot it doesn't follow crosshairs only shoots in same place middle of screen can you help
@OldsXCool
6 жыл бұрын
MrZeus305 I can't help you with the Dolphin Bar settings. However you still need the Touchmote software in order for the Wiimotes to work in MAME.
@05SVRACER
4 жыл бұрын
Hey Oldsxcool, Do you know if this works with windows 10?
@superhuman8897
7 жыл бұрын
hey yo that tutorial was legit, you also show model 2 input, can you explain how you set that up. I put it on mouse and it plays but when I set raw input on to use 2 wii motes nothing registers. it only works with raw input 0 but when I go full screen the mouse is still clicking things in the background and messing up the game. please help. also what about model 3 and naiomi, if you can?
@OldsXCool
7 жыл бұрын
As far as I know you cannot use two Wiimotes on Model 2 because your computer would have to have software which gives it the ability to have two independent mouse inputs. However there is a software that I haven't played around with yet that actually lets you do this and it's free. It's called Troubleshooter 2. Here is a video demonstrating this along with the link to where you can download the software. kzitem.info/news/bejne/w4-XwHWtsmOYf20 The cause for your problems with the mouse seemingly clicking things in the background is actually because the model 2 emulator's fullscreen is actually just a full size window with a mask that covers the borders of the window so you can't see them. If you pull the trigger too close to the outside of the screen you are actually grabbing the invisible border which causes huge problems. You fix this problem by running a program called "borderless window" that actually makes the borders disappear and inactive. What I do is program a hotkey on my keyboard to activate borderless window. When I start up the Model 2 emulator I hit the hotkey which makes the window the size of my screen, then hit it again to make the borders disappear. I then tell the emulator to go fullscreen. BAM! No more problems. About Model 3 emulation, unlike the Model 2 emulator the Model 3 emulator is all command line with no user interface. If you're at all familiar with DOS commands they won't seem so foreign to you, but there are instructions on how to install and use it here: www.supermodel3.com/Help.html When you download the Model 3 emulator make sure that you download one of the later unofficial releases also known as rSVN. The last official release is very hard to run at full speed. I use two versions currently. I use rSVN 274 for Dayton USA 2 and Scud Race. I use rSVN 460 for L.A. Machineguns. I use two different ones because the music sounds like it's a MP3 playing back at 96kbs on anything higher than 274. However in higher releases more textures to more cars have been added. The music is so good in Daytona 2 that I would rather have sound quality over some car missing their textures. However that was quite a while ago since I've played around with the Model 3 emulator. It looks like the latest release is rSVN 598. So playing around with different versions for different games will serve you better in the end. The Model 3 emulator takes a much more powerful CPU to run at full speed than the Model 2 emulator. My AMD Athlon II X2 240 was not up to the task though it almost ran it at full speed. My Intel Core i3 2120 was able to run the emulator with ease. When it comes to Naomi I know nothing. Most games that I like from the Naomi arcades I like have already been ported to other platforms.
@superhuman8897
7 жыл бұрын
thanks for the quick response dude, one more question I tried playing t2 the arcade game in mame and while moving the crossair across the screen it lags for a sec when it gets to the center, I tried to calibrate it but on the calibration screen the cross air wont go into the corners. is it just that rom dats messed up or am I doing something wrong?
@OldsXCool
7 жыл бұрын
Go into your MAME.ini file, scroll down to where it says "joysick_deadzone" and change the value to 0. That will get rid of the deadzone in the middle of the screen.
@hamzasale2651
5 жыл бұрын
In mame, i push trigger, but nothing happens! In the mame config bit
@DungarooTV
5 жыл бұрын
Hit enter then choose the trigger button (B)
@user-se2jd9kl6g
4 жыл бұрын
sensor bar or dophin bar?
@richarddonaldson330
11 ай бұрын
hey great video but if you can redo this video that would be awesome
@imherehaha8989
3 жыл бұрын
how do I do time crisis setup?
@miraclechild_502
5 жыл бұрын
when i try to set my X and Y inputs with the swipes it doesn't read it why is this happening
@RiseHomesElPaso
5 жыл бұрын
Any luck?
@gamedude6322
4 жыл бұрын
Does it have to be a wiimote made before 2011? I don't have any more made before 2011
@OldsXCool
4 жыл бұрын
Those were the guidelines for Touchmote when I made this video. I could have sworn I saw a comment that later Wiimotes worked fine. You can always try it because the software is free.
@J-shelby
6 жыл бұрын
hi, thanks for the tutorial, i can pair the wiimote on pc , but i can move the pointer of the led tv but when i enter mameui64 or regular mame in input for this machine do not recognize the control , can you help me? and when i enter in touchmote in config say in monitor that requieres drivers and is a tv led samsung plug with pc by hdmi, what can i do? thanks a lot
@OldsXCool
6 жыл бұрын
juan carlos corlet If you can move the mouse cursor before you enter MAME then you're doing it wrong.
@J-shelby
6 жыл бұрын
Hi again, i can move the Wiimote on desktop of Windows, and when i run mame can move it to, but do not respond when i put input (this machine). What i do wrong ? Thanks a lot
@OldsXCool
6 жыл бұрын
juan carlos corlet What you're doing wrong is using the mouse profile in Touchmote. Mouse emulation does not work in MAME. The whole reason why I made this video is to show you how Touchmote is supposed to be set up.
@J-shelby
6 жыл бұрын
But the touchmote do not recognice mi TV LED, Say that drivers requiere. And inside touchmote i have to put set x360 ? But i put with that layout and not work. When i pair the Wiimote with touchmote i can move like a mouse, i do not know What i am doing wrong. Sorry bother you and thanks a lot for your help.
@fraserkinloch3765
7 жыл бұрын
Did I miss something or how do you actually hook up a sensor bar to the pc?
@OldsXCool
7 жыл бұрын
You don't hook the sensor bar up to the PC. The sensor bar is nothing but an array of infrared LED lights. There are no actual sensors in it as the name might suggest. I am using my Wii sensor bar which is hooked up to my Wii. When I want to use it for my PC I just simply power on the Wii to turn the sensor bar on. If you don't have a Wii there are sensor bars that are powered via batteries or even USB. If you have a Mayflash Dolphin Bar, that is a different story, but the Dolphin Bar does way more than just emit infrared light and needs to be hooked up to the PC via USB.
@fraserkinloch3765
7 жыл бұрын
OldsXCool Is that just to keep a connection between the sensor bar and wii remote? I have a sensor bar powered separate from my old wii, was wondering if I could use that?
@OldsXCool
7 жыл бұрын
On a actual Wii sensor bar there is absolutely no connection between it and the Wiimote. The sensor bar's job is just to shoot light, nothing more. If you have a third party sensor bar that's powered separately from the Wii, that will work. The infrared camera in the Wiimote tracks the light emitted from the sensor bar to give it it's relative position. That's why the Wii as well as the Touchmote software has to know whether your sensor bar is on the top or bottom of the screen.
@fraserkinloch3765
7 жыл бұрын
OldsXCool ahhhh Right think am getting you now. Would need to set it up and give it a go. Thanks for the advice. Will keep you posted on progress:)
@OldsXCool
7 жыл бұрын
You're welcome. Have fun :)
@musicvideoenhancer
3 жыл бұрын
Eveything worked, except for the fact that, confguring a X360 stick to the wiimote pointer, the emulation of x360 controller means the pointer is supposed to go back to the center of the screen, so, everytime you cross the middle of the screen with the wiimote, the AIM acts strange, being "grab" by the center of the screen. If you try to change Touchmote to mouse pointer, MAME don't recognize the wiimote movements. So, it's pretty much non-functional, unfortunately.
@OldsXCool
3 жыл бұрын
You have to adjust the joystick dead zone to 0 in the MAME ini file. It's got a default dead zone of 0.3 I believe which is why your cursor gets stuck in the middle.
@musicvideoenhancer
3 жыл бұрын
@@OldsXCool It is exactly as you said, now it's working flawlessly. Finished Revolution X today, it was lots of fun, thanks for the reply man!
@OldsXCool
3 жыл бұрын
You're welcome. Thanks for watching and have fun shooting things in the face!
@KRIS__B
5 жыл бұрын
Hello plis tell me how to config or force 2 wiimote in mame model 2 etc i got dolphin sensor bar and bluetooth 4,0, i can't force emu 2 and more wiimote in any way
@OldsXCool
5 жыл бұрын
You don't need to force anything. Sync 2 Wiimotes with Touchmote and they will automatically be assigned player 1 and player 2 and MAME will recognize them as such. As for Model 2 you cannot have 2 Wiimotes as I used the mouse profile on Model 2, and you can't have more than one mouse unless you have special software to be able to do so.
@KRIS__B
5 жыл бұрын
@@OldsXCool Thank you for the quick reply, I didn't need to buy bluetooth, it may be useful for PS3, PS4: gamepads :P I just found a way for 2 Wiimotes I still need to test if it actually works, but on this guy's video it works, so great ;) Eh, these forums claimed that in addition to Touchmote I must have bluetooth yyyy
@dandyinn4326
7 жыл бұрын
hi thanks for the great tutorial. i am having cursor issues, however i cant find any mame.ini file anywhere so i can change the joystick deadzone value, i am using mame 0.139 - any ideas? thanks in advance :)
@OldsXCool
7 жыл бұрын
Thank you for watching :) The ini file does not already exist in the downloaded package. It must be created. The easiest way would be to move your MAME folder to the root of your C drive so the path to your MAME folder will be simply C:\MAME or whatever you named it. Next open a command prompt by clicking on "run" and type "cmd". Type cd\ to clear the current directory. Then type cd MAME (or whatever your MAME folder is called) and press enter. Now type mame.exe -cc You will then be able to go into your MAME folder and find a newly created ini file. Open it and find the joystick deadzone and set it to 0. Go to file and hit save before opening MAME to make sure the setting sticks.
@dandyinn4326
7 жыл бұрын
thanks champ!
@3d_dos452
5 жыл бұрын
it only works until the version of mame 0.174 after mame no longer recognizes the wiimote
@OldsXCool
5 жыл бұрын
That's not possible because MAME is not recognizing the Wiimote itself, but a XBOX 360 controller instead. If you are using the mouse profile in Touchmote it will not work.
@3d_dos452
5 жыл бұрын
@@OldsXCool works Now...use a touchmote software and aply correct map buttons and axis and works fine.in the last versión mame 0.208
@tomfritsche2656
7 жыл бұрын
Do you have your tilts mapped to anything?
@OldsXCool
7 жыл бұрын
No. They're not very useful because they're way too sensitive and there's no way to adjust their sensitivity.
@Boro87
6 жыл бұрын
Ive set my mousecursor to the wiimote pointer in touchmote. Everything works really well on my desktop. I configured mame so i can play the shootergames with my mousecursor. So why doesnt it work anymore when i point my wiimote at the screen when im in mame? :'( I really dont get it. So close to perfect emulation of a lightgun but its not happening sadly :/
@OldsXCool
6 жыл бұрын
Nils S Watch the video again, only this time, watch the video.
@Boro87
6 жыл бұрын
I did watch it and i got the thing with the rightstick to work, its just not so accurate n i cant get to the borders. I dont understand why mame isnt picking up my mouse when its controlled bye the wiimote, its a real shame it doesnt work
@OldsXCool
6 жыл бұрын
Ok. I think I know what's wrong. First of all, don't try to use the mouse mode in touchmote to control the MAME lightgun because it will not work which is the reason why my two videos even exist. Second, you need to go to your MAME config file (mame.ini) and change the setting called joystick_saturation located under core input options. If it's set too high it can cause the cursor not to go all the way to the extremities of the screen. I have mine set to 0.65. I think it's default is set to 1. Also while you're there make sure that joystick_deadzone is set to 0.
@Boro87
6 жыл бұрын
Thanks a lot! i will try this out
@Boro87
6 жыл бұрын
It works so well now OMG! THANKS! U just saved me 200 bucks. IL BE BACK!! ^^
@GODCONVOYPRIME
5 жыл бұрын
@00:23 Show myself playin- *ROWOOF!!!*
@OldsXCool
5 жыл бұрын
Actually that's the game saying "OOPS"
@GODCONVOYPRIME
5 жыл бұрын
@@OldsXCool I thought it was your doggo lol
@AulesHammer
4 жыл бұрын
Thank you for this but for some reason I can't get it to stay centered !! I love it left or right and the cursor goes diagonally :(.
@OldsXCool
4 жыл бұрын
The only thing I can think of is that you need to reprogram the lightgun movements. If you don't move your hand really straight while moving it up/down or left/right then it could record a diagnal movement.
@AulesHammer
4 жыл бұрын
@@OldsXCool so I have to have a super steady hand? When I do it sometimes it'll say the proper axis on the controller mapping but itll hace it like 5 times with the word "or " between.
@OldsXCool
4 жыл бұрын
@@AulesHammer If you end up having multiple commands on one direction, all you need to do is hit delete and it will erase all of those and change it to "none". All you have to do is highlight the setting and hit delete. Do not hit enter after you highlight the setting and then hit delete because then you will program that setting to be the delete button.
@AulesHammer
4 жыл бұрын
@@OldsXCool okay that definitely helped a lot. Thank you very much. Now Is there anyway to adjust sensitivity and to fix the controller being off center?
@OldsXCool
4 жыл бұрын
@@AulesHammer As fat as sensitivity is concerned you can adjust "joystick_saturation" in the MAME ini. It's normally set to 0.85 by default. I have mine set to 0.65 to slow the cursor down a little bit. I assume when you refer to the controller being off center that you mean that in the vertical direction. Unfortunately the only way to get the cursor perfectly center in the Y axis is to have your sensor bar in the middle of the screen. Aimtrak guns have special software to adjust for things like this but Touchmote does not. So turning the cursor off and aiming down the site of your gun shell for your Wiimote will not work.
@DungarooTV
5 жыл бұрын
Do you think this will work with Pcsx emulators to run light gun games?
@OldsXCool
5 жыл бұрын
It does. I beat the light gun section of Diehard Trilogy using it.
@DungarooTV
5 жыл бұрын
@@OldsXCool I have tried everything with no luck. The cursor just moves so slow. Any chance you could do a tutorial? Thanks in advance.
@OldsXCool
5 жыл бұрын
@@DungarooTV What game are you trying to play?
@DungarooTV
5 жыл бұрын
@@OldsXCool Hi mate, PS2 games like Vampire Night, Dino Stalker and Time Crisis series would be great.
@midnight7373
5 жыл бұрын
Anyone tried this on newer versions of mame,been messin with it for 3 days now,wiimote works on windows so I know the controller and Wii bar are good,switch settings to xbox controller settings then go into mame wiimote wont set anything...
@midnight7373
5 жыл бұрын
After fighting with new dolphin bar 3 days,looked at it with my camera on my phone,one side wasnt even lighting up,then used an old wii. Spent couple days messing with it and finally started working after I reinstalled touchmote. Win10 mame .201
@OldsXCool
5 жыл бұрын
That is a very common problem with Dolphin Bars. Whenever I look at the reviews for them there are always way too many people complaining that they have LEDs that aren't working either right out of the box or just a few months down the road. I've thought about getting one myself but that always stops me from getting one.
@jeffrielly
7 жыл бұрын
Is there a software driver that works for newer wiiremotes? I tried to connect mine which had a motionpluss built in, and it doesn't recognize it :(
@05SVRACER
4 жыл бұрын
How do you set up player 2, same way?
@OldsXCool
4 жыл бұрын
All you have to do it sync 2 Wiimotes to the PC and then program it in MAME the exact same way under the second player control options. MAME will also recognize the second Wiimote as player 2.
@05SVRACER
4 жыл бұрын
@@OldsXCool awesome, thanks man! Can't wait to try it out this weekend
@OldsXCool
4 жыл бұрын
@@05SVRACER No problem. Have fun!
@jamescole5018
6 жыл бұрын
it lagging and hard to move
@OldsXCool
6 жыл бұрын
Check the following: -check your batteries in the Wiimote -make sure there are no other competing light sources interfering with the sensor bar -make sure that other blue tooth devices like wireless keyboards and mice are away from the Wiimote -move your blue tooth dongle to one of the front USB ports of your computer All of these things can cause erratic behavior. I actually had to get a USB extension cord and move it away from my computer because it was picking up interference from somewhere at or behind my computer. I also had a wireless keyboard at my brother's house that was interfering with the Wiimote signal and had to put the keyboard on the floor while using the Wiimote.
@JohnSmith-qn3ob
7 жыл бұрын
To get a better image you should just use video capture software (like fraps)
@OldsXCool
7 жыл бұрын
John Smith I did it this way on purpose. I'm well aware of screen recording methods.
Пікірлер: 176