To configure the #TP-Link TD-W8970 ADSL2+ modem, follow these steps:
1. Connect the Modem: Connect the modem to your ADSL line and power it on. Use an Ethernet cable to connect your computer to one of the LAN ports on the modem.
2. Access the Configuration Interface: Open a web browser and enter the modem's default IP address (usually `192.168.1.1`) in the address bar. Log in using the default credentials (username: `admin`, password: `admin`).
3. Set Up the ADSL Connection:
- Navigate to the "Quick Setup" or "WAN" section.
- Choose "PPPoE" (or the required connection type as per your ISP).
- Enter your ISP credentials (username and password) provided by your service provider.
4. Configure Wireless Settings (if applicable):
- Go to the "Wireless" section and enable the wireless network.
- Set your desired SSID (network name) and security settings (WPA/WPA2 recommended).
5. Save Settings: Click "Save" to apply all changes. The modem may reboot.
6. Test the Connection: After the reboot, check your internet connection by browsing a website.
7. Update Firmware (optional): It's recommended to check for firmware updates in the system tools section for improved performance and security.
Your modem should now be configured and ready for internet access.
-------------------------------------
🌐 www.fastmodem.ir
-------------------------------------
#router #nas #san #storage #modem #adsl #vdsl #wireless #ptmp #ptp #ftth #isp #internet #network #dlink
Негізгі бет How to configure Tplink TDW-8970 | step by step
Пікірлер: 4