STEPS TO FOLLOW TO CONNECT ONE HD DSTV DECODER TO EXTRA TVs WITH RF MODULATOR (MODEL 5s Usually doesn't come with RF OUT)
Prepare your connecting cable wire by exposing the internal coaxial copper and silver spikes prior to attachment of your F-connector. The F-connector is the screw-mouthed silver-colored small nut that connects cable wires to decoder ports. In preparing your cable wires, ensure that the silver tiny metallic shreds do not come in contact with the bigger central copper spike. After insertion into the F-connector, only the copper spike should protrude from the center while the silver shreds form strong internal attachments with the body of the F-connector. Remember both ends of your cable wire should be prepared this way.
Single Extra TV Connection (Apart From the Primary Main TV)
-Connect one end of the cable wire to the RF - OUT port of your RF MODULATOR and connect the other end of the wire to the Ariel antenna port behind your TV.
-Connect one end of your RCA connector to the AV in at the back your Dstv decoder and the other end to the RF MODULATOR yellow to yellow, red to red and white to white.
-Your decoder must be switched on before proceeding to the next stage. While the DStv decoder and the extended extra TV and RF MODULATOR
are switched on, run a channel scan on your TV to search, find and save the signals received from the DStv decoder. After a successful search and save, the DStv decoder can henceforth be viewed from that extra TV on that particular channel number as saved.
How to run dstv installation wizard
• How to run Dstv Instal...
Convert Dstv decoder to universal receiver to watch FTA channels
• convert DSTV Decoder t...
Satellite finder pro| how to use| satellite finder app
Негізгі бет How to connect Dstv HD Decoder to two TVs|| how to connect RF modulator||Televes simply RF modulator
Пікірлер: 192