Last Part of the build.
Showing how to configure the Pavo20 first time if you want to connect a DJI FPV remote controller 2.
Pavo 20 has a ELRS or a TBS receivers as standard that does work from the box, but to get a DJI remotecontroller 2 to work, then you need to change some settings.
First update firmware on both the VTX, if it's a caddx vista or Runcam link you use the DJI Assistant 2 (FPV series)
Also use this to activate the air unit.
Download Betaflight software from their homepage to connect to the FC with the included USB-C cable.
In ports tab: Change the Serial Rx to UART 5
In the Receiver tab: Receiver mode to Serial (via UART)
Serial receiver provider should be SBUS
CLI tab:
type:
set sbus_baud_fast = ON
type:
save
Now you should be able to get the controller to connect the the VTX and see inputs happen I Receiver tab.
remember to give this a like and subscribe if this helped you or you just found it interesting.
Негізгі бет How to Connect Pavo20 with DJI FPV Remote Controller 2, Night Eagle HD Betaflight - Build Part 3
Пікірлер: 78