Thx I have been looking for how to use my laptop screen as a monitor for my Pi and this video really helped a lot :) Finally I can run my Raspberry Pi from my laptop!!
@TastyLier
5 жыл бұрын
First time a KZitem video has given me solution with no problem
@bhavikprajapati9526
5 жыл бұрын
I have tried VNC viewer many times. but it doesn't work. After using your method, I have received RPI screen on my laptop. It was amazing!! Thank you for the video.
@DiyintheGhetto
5 жыл бұрын
You will have to go into raspberry pi config in the SSH to enable remote vnc. by using this command sudo raspi-config i do it all the time. once in there you have to find it. Sense i use a Raspberry pi 3B it is in the interface area. Not sure for other pi boards.
@hakansezen2019
5 жыл бұрын
@@DiyintheGhetto i cant use wi-fi at rasp. I get attention no wireless no found
@jatingoyal4947
2 жыл бұрын
i am getting connection timed out noificatn on mobaterm, how to resolv it ?
@harish_varadarajan
6 жыл бұрын
Awesome.. Its working for me. Initially I tried with NOOBS connecting to BRAVIA TV via HDMI but didn't work. This is working Flawlessly. A Big Thank you ! Great Video !!!
@kellyfrances9435
7 жыл бұрын
So thorough! There's literally nowhere you can get lost with your instructions. Perfection! Thanks a lot!
@abhishekrenjan3391
7 ай бұрын
A real hero who helped me ....this video is the one i was searching for
@refuzion1314
4 жыл бұрын
Thank you very much I've been trying to get my raspberry running for so long
@karthie003
7 жыл бұрын
Do you know me?I was the small guy who came to your shop to buy things for my project..And you taught me that basic blink programme in arduino....And I bought a Raspberry pi....And Im from ooty....
@samiksharaviraja3631
6 жыл бұрын
I'm from Mysore!!
@roaam78
6 жыл бұрын
Asgardian here
@suyashchandra5431
5 жыл бұрын
Mars here :)
@deepakthondapu9225
5 жыл бұрын
My simulations on humanity are going wrong!
@user-qi6ig6gb8x
5 жыл бұрын
We need more indians to do this kind of tutorials. Great work. Big thanks!
@TheControlPhilosopher
4 жыл бұрын
Thanks sir! Everything looks easy, but we all owe you credit for that.
@naturebreeze7825
2 жыл бұрын
this video was the most helpfull video to resolving the network issue thank you very much saravanan
@swaroopr2424
5 жыл бұрын
This helped me for 3b+. Thanks
@prof.anandsrivatsa2887
7 жыл бұрын
Thanks Dear Saravanan..your video helped me to get going on Raspberry PI.
@giorgiomoralesluna
7 жыл бұрын
You, sir, deserve a medal
@wbadry
6 жыл бұрын
Thanks Saravanan for this great tutorials. I guess the only trick was to add ssh file to SD card. You can even add it using explorer but make sure you remove any extension. This is the solution to connection refused. I also used IP address instead of host name
@tushargarud4230
3 жыл бұрын
Very useful when you don't have a USB keyboard. Thanks!
@Muzkaw
6 жыл бұрын
Thank you very much for this awesome tutorial ! Doesnt work with NOOB, but flawless with official raspbian build
@arunimakalasanjay7916
2 жыл бұрын
why does it not work with noob?
@MrEraflav
7 жыл бұрын
Thanks... i saw few videos before this one and only you were able to set a pretty good procedure that actually works!
@zorrochileno
5 жыл бұрын
For those who couldn't detect the ip through the ip scanner, I found the answer here raspberrypi.stackexchange.com/questions/11684/how-can-i-connect-my-pi-directly-to-my-pc-and-share-the-internet-connection -Go to network and sharing center. 1) share net through your wireless connection, sharing (allow..) etc 2) Fix a static IP eg 192.168.137.1 /* You will need to install terminal emulation software (Putty) if you are using Windows and also USB drivers for the Console Lead. The Raspberry Pi uses its built-in serial port to allow devices to connect to its console and issue commands just as if you were logged in. You would also need PL2303 Drivers to do so. I have been using my Raspberry Pi this way for quite a while and have no issue so far. It merits mentioning that Raspberry Pi Console Cable drivers (Pl2030) wouldn't work if you are using Windows 8 ( I tested that too). */
@adrienisnard5879
7 жыл бұрын
Best video on that topic! Working for me! Thanks Saravanan AL Raspberry Pi 3 Model B
@abhijeetsaraf2328
5 жыл бұрын
best video ever for begineers
@ammarofficewala7661
4 жыл бұрын
Thank you so much, it's save my so many hours of R&D
@rajmrithul9521
3 жыл бұрын
thanks a lot it worked but i used putty and vnc server
@AhmedGadd
6 жыл бұрын
Good tutorial. Everything is OK for me when connecting Raspberry PI to the router. Because the Ethernet interface in my laptop is not working, I use USB to Ethernet connection. But it does not work when connecting the Raspberry PI.
@victorshpalianskij3928
3 жыл бұрын
Thanks Saravanan, it"s are best solution....
@mohammedal-shaboti7939
7 жыл бұрын
Very helpful, especially the step of enabling ssh connection, and mobaxterm tool. Thanks
@thevarunfactor
7 жыл бұрын
Perfect tutorial sir, thanks. Managed to connect to the Pi.
@IoTLearner
6 жыл бұрын
I am getting an error with startlxde that "cannot open display: localhost 10.0"
@aman72kamboj
5 жыл бұрын
@@IoTLearner same here
@ramsabarish9011
3 жыл бұрын
@@aman72kamboj now u fixed?
@aman72kamboj
3 жыл бұрын
@@ramsabarish9011 Yes and tks for reply. i asked a question for my 14 yrs son. since then he has advanced and able to make few programms like touch less thermal camera and now learning deep neural network..
@testingshanu
6 жыл бұрын
Thank you very, I had struggled hard for this before watching this video!
@sreeraj1980
6 жыл бұрын
it works!! I used M0baxterm personal edition as my GUI!
@anirbaanmukherjee
3 жыл бұрын
Dear Sir, Following your tutorial I had successfully used the laptop as the monitor for my raspberry pi 4 . However, of late when I am trying to do the same after connecting to the MobaXterm it is saying Connection refused. The raspberry pi is booting has the power LED on and on connecting the LAN to USB on my laptop and after disconnecting the wi-fi using the Advanced IP scanner it is showing the IP is alive and is pinging successfully. Could you say what could be the issue here
@nehashaw7196
3 жыл бұрын
Same problem. I worked yesterday and it was working fine but today it is showing connect timed out
@nehashaw7196
3 жыл бұрын
Any updates how you solved this problem?
@nithishpaul2446
3 жыл бұрын
indeed a really great video with the info being shared.
@comrade531
3 жыл бұрын
Thank you. I have been looking for this video👍 informative video for beginners.
@VisaliniKumaraswamy
5 жыл бұрын
Good explanantion.. And I was searching for this video..
@shoaibshaikh4574
4 жыл бұрын
i appreciate your efforts, however ater discovering ip from ip scanner, instead of using moba maxterm you can use vnc viewer and put that ip, it will work
@rmpcustomersupport6430
4 жыл бұрын
The more easiest way is to use Remote Desktop connection☺️
@ManideepPabba
4 жыл бұрын
You can use whatever viewer you want to. The instructor has used his preferred viewer. If you feel like there are more benefits with the other viewer. You should make more videos and enlighten us.
@aviralrg
4 жыл бұрын
Thank you Saravanan for this video.
@mayankshigaonker7725
5 жыл бұрын
Thanks worked for me on the raspberry pi 3b+
@Ken-rn2nw
7 жыл бұрын
thanks for the video but you should also put a tutorial video and teach us how to enable ssh by connecting raspberry to monitor via hdmi cable...
@himanshudadrah
6 жыл бұрын
Thank you for this video, though Advance ip scanner was unable to detect my pi so I used bridge connection to get my raspberry pi's ip on advance ip scanner.
@lavanyajakka4129
5 жыл бұрын
can you please tell me how to use bridge connection. I have the same problem, IP scanner was unable to detect my raspberry pi's IP
@vinvonvin2
6 жыл бұрын
Thank you so much. Worked with Raspberry Pi 3b+ connected to new Dell laptop with ethernet connection. Keyboard and mouse work fine too. Could you please write a small note in the video instructing to power off before removing the SD card from the Pi to create SSH file?
@shrajanbhandary6336
6 жыл бұрын
Wonderful tutorial. Thank you so much.
@acab94ful
7 жыл бұрын
Thank you sir, your tutorial very help me to connect raspberry PI 3 on my windows 7. :D
@calinlar1638
9 ай бұрын
Hello, please tell me why I don't see the wireless icon on the panel, I add wireless&wired network like in your tutorial, but wireless do not appear on the panel, just wired network, how can I add? I have a raspberrypi 4 B/4Gb.Thank you.
@kienkangcr7
6 жыл бұрын
Hello friends Why can not I share wifi with another IP address for Pi3? At 0:56 'can not be clicked on
@durveshvikhankar8589
6 ай бұрын
if you find solution plz tell me
@sigmaelectric4865
5 жыл бұрын
Thanks brother this tutorial helps me a lot.
@aman72kamboj
5 жыл бұрын
can u make video. i m getting error message
@syedabdulkhayyum9535
6 жыл бұрын
Thank you sir !! This method totally worked for me 👍
@ValsarajR
7 жыл бұрын
Super Cool Tutorial. Its quite simple. Thanks
@markepiscopo7558
5 жыл бұрын
Great job. Works with wifi too. I'd rather not use wifi so that I don't have to log onto someones network to make my setup work (simulated PdP11). But switching from CLI to GUI does not work as shown using either ether net cable or wifi. The server appears to start (CLI prompt goes away and a ctrl Z results in a message that the server stopped) but the display does not change to GUI. Neither startx nor startlxde work. Does the GUI require the use of VNC?
@Timmygobang
5 жыл бұрын
Thanks for the tutorial. Worked like a charm! :)
@codydowling1120
7 жыл бұрын
Thank you- excellent video! A few comments: - Perhaps you can put a text overlay on the video that explains how to set up the ssh file via the GUI, since some of us would prefer to control remotely, but DO have the rPi connected to an HDMI monitor. It will save some unnecessary steps. - For some reason, I show several Raspberry Pis when I do the scan, but only the one that shows the manufacturer name works. when I expand the other, it just shows an FTP folder (I"m not sure what that means) I wish KZitem had a "tip jar" tied to videos, as I would definitely pitch a few dollars in, just to say THANK YOU!
@fritznansen2328
6 жыл бұрын
well done man! Thanks for the good description!
@padmalayarawal3091
4 жыл бұрын
Thank you so much sir 😇
@kpyang2010
7 жыл бұрын
By far one of the better and simple Tutorials. Thank you SA!
@ramwagh2103
5 жыл бұрын
Nice Video...But I'm not getting Desktop Screen after "startlxde" command. Kindly Help
@AmandeepKamboj19jan
3 жыл бұрын
I am facing same problem. It's says command not found
@nihalsn5200
6 жыл бұрын
It works fine after doing it can't access the picamera it shows out of resources
@aneesanazmemon6534
Жыл бұрын
we are using raspberry pi4 B, should we follow the same process?
@mikailgeorge
5 жыл бұрын
on the first try everything worked well, but then when i tried connecting the pi for a second time it created a duplicate IP address and i could no longer remote login. please help
@charugera7931
7 жыл бұрын
thank you for providing the ssh file!! it worked finally
@PrashanthKR
6 жыл бұрын
for me also its required plz help me mailid-kodurprashanth@gmail.com
@Alfonso013
2 жыл бұрын
Hello dear... sorry for asking, can i use cat7 as an ethernet cable for raspberry pi 3b+?
@seso9698
2 жыл бұрын
Hi, I dont have sharing tab in my wireless network connection properties. How to enable it. I am with Win 11 Pro
@DissyWorld
2 жыл бұрын
My raspberry didn't setting for login, earlier it did. Now it shows network error: connection timed out. Can you help
@glynnbayliss5156
3 жыл бұрын
I followed your instructions right to the end, but I never got the Wifi symbol. I got to log in to my pi, but now when I try to login with MobaXterm, it either times out or connection refused. What's happened?
@nehashaw7196
3 жыл бұрын
Same problem. How did you solve it ?
@himchauhan1995
3 жыл бұрын
@@nehashaw7196 same problem, have you got any solution?
@plica06
Жыл бұрын
Will this work if you already set up your Pi with a fixed ip? Will windows still give it an ip address you can scan for? I don't think so?
@user-vp1zs3us3r
5 жыл бұрын
This worked like a charm.thanks.
@Mercento
3 жыл бұрын
my wifi properties do not have 'local area connection'
@navidbakshi
5 жыл бұрын
thank you sir i have so many ways but this way is suppeeb
@r3idexe968
4 жыл бұрын
Your really smart sir
@alecjorquera7627
2 жыл бұрын
Does this use all 8 connections from the ethernet cable or is there extra for other uses?
@askinc102
5 жыл бұрын
Brilliant tutorial. Mad respect.
@davidbretz2159
Жыл бұрын
Man I love you !! Amazing tutorial!
@mohamedrizwan3410
7 жыл бұрын
after entering the host name SSH terminal is opening but it says CONNECTION REFUSED. help to clear this error
@sreeraj1980
7 жыл бұрын
Dont use NOOBS, use "RASPBIAN STRETCH WITH DESKTOP" and follow the instructions on the raspian offical site.
@CoderSprint
7 жыл бұрын
kzitem.info/news/bejne/uHiivqp9sJ2LlG0 Follow this tutorial, its very simple.
@IoTLearner
6 жыл бұрын
My SSH will work when I put the IP address alloted instead of the name in MobaXterm
@Ganigamorico
5 жыл бұрын
You must type exactly rapberrypi.mshome.net or RP ip
@comet1072
5 жыл бұрын
I had the same issue, but managed to solve it. I think the problem in the end was that my ssh file without extension didn't work. When I checked by putting the SD cart back in my laptop, it was never removed. To fix it, I connected my raspberry pi to the TV with a HDMI cable. (This means that you both have to have a TV with this input and a HDMI cable, the HDMI input in you laptop won't work since it is an output, thats also the reason why you need to do all these complicated steps) However, if you have a modern TV with a console, you'll probably have both. Once connected, I installed the NOOBS software, and went to settings, configurations, interface and then manually turned ssh on. (You don't even need to connect a keyboard to the raspberry pi for this, you can do everything with just a mouse, which might make stuff easier, since you might not have a keyboard since you have a laptop). After this, you can continue the video, but just don't use the ssh file. This worked for me, hope it will work for you as well :)
@rjobaanable
4 жыл бұрын
good tutorial, but when using startlxde i am getting error command not found. I am using OSMC. please help?
@AmandeepKamboj19jan
3 жыл бұрын
Any idea, how to solve this problem
@pallavisharma1207
6 жыл бұрын
It was genuinely helpful. Thank you.
@saravanker2634
6 жыл бұрын
Hi. I was wondering. After connect raspberry pi. Will I be able to disconnect and use laptop as normal?
@ashiyah4732
5 жыл бұрын
U got a point 🙌🏻... please reply Mr-saranavaran
@FreeOfRules
Ай бұрын
Thanks, but just one quick thing: Please do NOT show your IP adress, it may not look like much, but obtaining it could cause BIG trouble. But besides that, very good video!
@rozzz641
3 жыл бұрын
Thank you this is very very very helpful!!!
@DGNG2023
4 жыл бұрын
Fine Sir, But execution is very slow, sometimes session gets aborted. can you pl tell how to rectify
@adithyashankar6562
7 жыл бұрын
Very clearly explained
@rachanakulkarni2004
6 жыл бұрын
Really helpful video. Worked for us.
@lahiruudara3356
3 жыл бұрын
This is great!! I used this successfully for some time, but now advanced IP scanner cannot identify the pi. Any advice?
@anuradharavi8745
2 жыл бұрын
Same here. Did you find the solution to this problem?
@lahiruudara3356
2 жыл бұрын
@@anuradharavi8745 Unfortunately no. It is not consistant. Sometimes it happens, sometimes not.
@anuradharavi8745
2 жыл бұрын
@@lahiruudara3356 i found the IP assigned to RPi is from different network from the Ethernet used in laptop. This is why we cannot find using the ipScanner. I don't know how to get the RPi to assign the same IP from the laptop Ethernet.
@Ganigamorico
5 жыл бұрын
Thank you sir, this video is very helpful
@igernald5849
2 жыл бұрын
I successfully connected my Raspberry Pi 4 to my laptop. I am trying to figure out how to use the terminal with my laptop and live stream a camera feed. I hope you could help me. Thank you!
@prasannatabhange5934
6 жыл бұрын
Hello sir, i am new to Raspberry...from where to install command prompt?
@vinod1095
6 жыл бұрын
xD search for cmd on your computer, it comes preinstalled.
@MrRockfish01
5 жыл бұрын
I just want to connect the pie to the laptop for faster rom transfers. Not graphical use. Do I still have to do all these steps,?
@Monasworld8500
2 жыл бұрын
Sir when I enter the user name pi and password as raspberry it says access denied both in mobaxterm and putty
@voltag1046
2 жыл бұрын
I have the same problem
@Bhakti_Sadhana64
7 жыл бұрын
Thanks for the effective video, though this process works for booting kali? // I mean creating ssh n all //
@Naveen-ef2dg
6 жыл бұрын
Thanks alot sir You deserved applause 👏👏👏👏
@sonokhan6101
5 жыл бұрын
in mobaxterm SHOW ERROR"NETWORK CONNECTION TIMEOUT" how can i resolve it pleas hellp
@comet1072
5 жыл бұрын
I had the same issue, but managed to solve it. I think the problem in the end was that my ssh file without extension didn't work. When I checked by putting the SD cart back in my laptop, it was never removed. To fix it, I connected my raspberry pi to the TV with a HDMI cable. (This means that you both have to have a TV with this input and a HDMI cable, the HDMI input in you laptop won't work since it is an output, thats also the reason why you need to do all these complicated steps) However, if you have a modern TV with a console, you'll probably have both. Once connected, I installed the NOOBS software, and went to settings, configurations, interface and then manually turned ssh on. (You don't even need to connect a keyboard to the raspberry pi for this, you can do everything with just a mouse, which might make stuff easier, since you might not have a keyboard since you have a laptop). After this, you can continue the video, but just don't use the ssh file. This worked for me, hope it will work for you as well :)
@doomframe9878
3 жыл бұрын
omg you saved my life
@SonOf_Monotheist_Supreme_Being
5 жыл бұрын
how to change the connection to Local Area Connection It is showing Ethernet 2? I am unable to change it in Windows 10.
@mushfiqurrahman1802
5 жыл бұрын
same here
@DiyintheGhetto
5 жыл бұрын
Hello i turn my raspberry pi 3B into a NAS system. I was wondering if it is possible to create a link to the PC through the network wire same way you did as a Local drive?
@mondirmomo2927
6 жыл бұрын
thanx you it Works perfactly
@ashiqrahman8372
4 жыл бұрын
i cant find the sharing option in wireless network connection
@lukenonyane587
5 жыл бұрын
worked like a charm.
@walter.h.clayton
4 жыл бұрын
Thanks this worked for me!
@aadhilakshmitraders7258
3 жыл бұрын
Saravanan Sir, I am new to Raspberry usage. I tried to connect to my laptop display, but mobaxterm terminal is showing network error: connection timed out. Any solution for this ?
@nappingpup105
4 жыл бұрын
When given the opportunity to initially login to either the network ip of the RPI or to use the name of the network device, which is raspberrypi.mshome.net, per the video, then use the long raspberrypi.mshome.net option. It is possible that a different ip address is assigned when you reinsert the SD card and power up again. At least this is what happened to me. Another note, I was unable to get beyond the command startlxde. The RPI reported Command Not Found. At this time I am simply taking some other steps, although I might return here later. I liked the video. Also, I am using this video on a RPI 4 Model B, sitting here at my kitchen table. Also, I installed Raspbian Buster Lite, and maybe this version does not directly support the startlxde command. I did learn a lot from this video. Thanks to Saravanan AL.
@hiteshgoyal2858
3 жыл бұрын
Hello Saravanan! Thanks for the video. However I am facing an issue while using this method the second time. So, as I understand and please correct me if I am wrong. 1) Every time, if I want to access the my raspberry pi desktop I will 1st have to create an SSH folder in the SD card. 2) I did the same. But this time when I tried to access raspberry pi desktop via MobaXterm I got a Network error: Connection timed out. 3) I tried finding out the error and ran advanced IP scanner to trace the IP of pi, but the scanner is not showing the IP address of the PI. Please advise what I am doing wrong. PS I cannot share the screen shots here but would be happy to share the same.
@ThanapongPhanthong
5 жыл бұрын
thank you so much, it is very useful for me, nice !!!
@extrabassyt1133
5 жыл бұрын
*SAME METHOD CAN BE USED FOR RASPBERRY PI 4???* 🤔🤔🤔🤔
@debiduttapradhan9260
4 жыл бұрын
Yes
@shan_singh
2 жыл бұрын
My laptop doesn't have ethernet port will usb to ethernet work?
Пікірлер: 385