Step-by-step Guide:
1. Wire the strip to the WB5 controller, and turn on the power.
2. Reset the controller first (long press "SET" key for 10 seconds till the red pilot lamp blinks) if you have had operations before.
2. Under the red pilot lamp blinking, short press "SET" key to switch to your led strip mode, white light pilot lamp for single color led strip, yellow light for CCT, red light for RGB, green light for RGBW, and blue light for RGBCCT. (It's necessary, related to your control page)
3. Turn off the power, then turn it on; Turn off the power, then turn it on; Turn off the power, then turn it on; Turn off the power, then turn it on.
4. Open your Tuya or SmartLife APP, click "add device" - "Lighting" - "Strip (WiFi)", connect to your network, and this time, the red pilot lamp will blink quickly. Click "Blink quickly", and you will pair the WB5 to your smartphone.
Other connection methods:
1) Use "SET" match key: • How to Pair LED Strip ...
2) Switch power 3 times to auto-find the device: • How to Connect WB5 to ...
Welcome to learning led strip lights knowledge here: www.superlight...
We provide free online and email technical installation instructions!
If you have any questions, please feel free to contact us.
www.superlight...
Amazon Store: www.amazon.com...
KZitem Channel: / superlightingled
FaceBook: / superlightingled
Our Website: www.superlight...
Негізгі бет How to Connect WB5 With Tuya & SmartLife? (Manual Connection By Switching Power) - superlightingled
Пікірлер: 3