First off allow me to say welcome and thank you all for clicking on this video; it means so much! It would also mean the world if you could smacked this video with a like and went ahead and gave the channel a good old subscribe. Anyways In this video I go in depth on how to properly take apart the center caps from a set of Audi rs4 wheels that will eventually go on my b7 audi s4. This DIY is extremely easy and can be done by almost anyone right in their own driveway or garage. Very little materials will be needed to complete this exterior mod/ how to/ paint job. The following list is all you will need, you'll need some sandpaper of your choice, I used 150 grit. Your preferred brand or shade of black paint as well as a good clear coat and primer. In addition to a pick tool you will also need a bucket for soap and water. This will allow you to give the wheel caps a proper cleaning and wash. Most of the materials needed for this automotive DIY can be sourced right from your house or local dollar store, this is where I found the majority of my materials. The other thing I had to purchase was black paint and clear coat but that was only because I had run out from a previous paint job I did. All in all this mod should only take a few hours or a day to complete and is far from being a difficult thing to do. Unfortunately I am far from perfect when it comes to spray painting, so I do hope you just take away the process in which the wheel caps are dismantled by and not my poor spray job. Thank you again I hope to see you all back for more videos! And I encourage you to leave a comment down below with what you may have liked or disliked with my video, and some video ideas you all may have!
- 4 жыл бұрын
How To Correctly Paint Your Audi Wheel Caps Gloss Black! Easy At Home DIY For Perfect looking Wheels
- Рет қаралды 6,777
Пікірлер: 13