Oh my gosh, who else had anxiety through out the entire time she was applying it? Lol 🙋🏻♀️🙈 She did an amazing job! 😍
@southernwondernc
5 жыл бұрын
Haley Leal lol I had anxiety the whole time I was applying it! 🤣 thank you for watching!!
@shhers3317
4 жыл бұрын
Wow! I could never accomplish that! Great job
@jessicamarolf6023
4 жыл бұрын
I discovered today that if you leave the image in the water while you're applying it, it helps so much with a full coverage image!
@soniaortega4329
3 жыл бұрын
Please elaborate on the method you use to apply full waterslide. What do you mean leave in the water when applying? Do you put your tumbler in the water waterslide and apply? Thank you
@carmenrios4081
6 жыл бұрын
OMG... I m watching this and holding my breath...lol, wow, that is amazing. I was thinking to myself, I would have done it in sections because I would have broken the paper by now. Thank you for such a well done video. Love the cup.
@southernwondernc
6 жыл бұрын
Carmen Rios thank you so much! It’s not an easy thing to do, but it can be done!! 😁
@BloodSweatnBass
6 жыл бұрын
Nice set !
@taynacarter9992
6 жыл бұрын
Have you applied a full cup water slide to a 30 oz. RTIC or one that has a center ridge?
@shantelljex-cruz3575
4 жыл бұрын
Omg... I’m holding my breath for you.. your amazing
@kevinaldcroft6291
5 жыл бұрын
Measure the out side circumference and height of the cup or use the formula 2 * pi * r (Pi = 3.141) (r = outer radius of the cup) and print using the closest print size available on your printer software
@southernwondernc
5 жыл бұрын
Kevin Aldcroft thank you for the info!! ☺️
@bigd7364
4 жыл бұрын
You are so brave!!! Nice job!!
@totemmechanics1
2 жыл бұрын
If you spray more varnish/sealer on at the start, does it slide off more easily with big A4 ones? I have tried 6 times and it's like thin flimsy plastic, and it scrunches up and folds up and sticks to itself. (Hayes paper, Plastikote Clear Super spray done 3 times with an hour to dry for each coat, and the very edges trimmed in case the edge got sealed by the spray. Lukewarm water - all done like all the videos say...) Its impossible!!. Or have I bought the wrong spray?
@sagikerius
5 жыл бұрын
That is really cool! Brave.... Lol... But very nice!
@chloe_ee3798
6 жыл бұрын
What is the brand/model of the printer you used to print this watercolor painting?
@southernwondernc
6 жыл бұрын
Chloe _ee it is a HP Envy 4500 inkjet printer.
@mandiholmes69
5 жыл бұрын
Me again with another question. After I have placed the water slide on and it's dried can I then epoxy resin the cup ? Thank you 😀
@southernwondernc
5 жыл бұрын
Ladymandi69 xx yep! After it’s on the cup and dry you can epoxy!
@demonicangel139
6 жыл бұрын
can you cut the image in half and do 2 separate images into the cup? just lime them up
@southernwondernc
6 жыл бұрын
Elise Pontano yes you can.
@mpetterez3573
6 жыл бұрын
What setting to you use on your printer to print on the waterslide?
@southernwondernc
6 жыл бұрын
M Petterez normal setting just like you would print for paper. That’s what I use.
@larrybaril3728
6 жыл бұрын
Thank you for the video. I’m wondering where one would go to find different pictures to use for this purpose. Sherry Baril
@southernwondernc
6 жыл бұрын
Larry Baril I found these images on Etsy. You can use any image you want! Yahoo or google images. Even pictures of your family!! Happy crafting!!
@michmali4376
6 жыл бұрын
Girl! You are talented and generous for sharing! Thank you!
@southernwondernc
6 жыл бұрын
Mich Mali awww thank you so much! I like to help out!
@SarahandFam
3 жыл бұрын
I want to put a waterslide on an Ozarks cup.. is it necessary to paint it first or can I just get the white cup and start there? Is it NECESSARY to seal it after? I normally do coffee cups and bake the slide on but I cant bake an ozark...
@southernwondernc
3 жыл бұрын
Sarah and Fam the ozark cups have a slippery coat to it, the waterslide paper will not hold to that. You need to spray a flat paint on it. Then you can add your waterslide paper. Make sure to seal with a clear sealer spray and then you can add epoxy.
@leesahcage3297
6 жыл бұрын
Can you oven bake theses to seal the image onto the mug or do you spray sealer on it after the decal is applied to the cup?
@southernwondernc
6 жыл бұрын
Leesah Cage I have never baked the image on. I seal with a clear spray. I think the image would melt if you put it in the oven. Hope that helps 😊
@callimcclendon3085
5 жыл бұрын
Does the water slide need to be sealed after applied before epoxy? Should we spray the whole cup once we have the waterslide on THEN epoxy it?
@southernwondernc
5 жыл бұрын
Calli McClendon no the waterslide just needs to be sprayed before applying to the cup. Then you can go straight to epoxy.
@xxicegirl19xx3
6 жыл бұрын
does the paper need to be sprayed? and what do you spray it with?
@southernwondernc
6 жыл бұрын
xXIceGirl19Xx yes you need clear sealer spray. You can find it at Walmart or Lowe’s hardware. Spray it and let it sit for a little while so it seals the ink on the paper
@anitalau5226
5 жыл бұрын
I’m new to your channel... loved the cups, though wished you could have finished your entire cup on this tutorial...
@sarahlou5777
5 жыл бұрын
Would you be able to do a picture doing the epoxy? Also you could keep a water mister with you to keep it slightly damp? How did you add the glitter?
@southernwondernc
5 жыл бұрын
Sarah lou I no longer do these cups. But there are many videos on how to mix and apply the epoxy.
@sarahlou5777
5 жыл бұрын
@@southernwondernc is there a reason you don't do them anymore! They looked really nice!
@southernwondernc
5 жыл бұрын
Sarah lou I sell more welcome front porch signs than anything and it has taken over my time. I just didn’t have time to do the cups and signs.
@mychellederosin
4 жыл бұрын
How did you get your printer to print the entire page. my printer cut off about 2 inches from the edge of the right side of the page.
@southernwondernc
4 жыл бұрын
Mychelle Derosin you have to go into your printer settings and make sure it’s set to A4 size paper. Then that should print the whole page.
@taraht.5689
6 жыл бұрын
is there a way to remove the waterslide if you've applied it and then realized there are a lot of creases and bumps?
@southernwondernc
6 жыл бұрын
Tarah Tobias you would have to do it while it’s still wet. Once it’s on, then you would have to print another and apply again.
@chasingkans
4 жыл бұрын
After I spray mine with clear sealer I also spray with plastic dip a couple times it will help it not tear as easily
@wendypemberton7708
4 жыл бұрын
Where do you get photos or fonts to print names for the water slides on your computer?
@southernwondernc
4 жыл бұрын
Wendy Pemberton most of the time Etsy. ☺️
@deedriawoods9301
6 жыл бұрын
hello, so after you have the water slide on the cup you just put epoxy on it and that's how it stays?
@southernwondernc
6 жыл бұрын
Deedria Woods yep that’s it! I wait for the waterslide to dry all the way and then epoxy! Happy crafting!!
@Csi807
6 жыл бұрын
Amber Johnson is it safe to drink from the cup after putting krylon?
@southernwondernc
6 жыл бұрын
Ramona R I seal my cup with a FDA approved epoxy. I do not leave them unsealed. It is fine to drink out of them after about 3 days of curing.
@mamamacgyver
6 жыл бұрын
Most cups have lids that you drink from or a straw. I never drink straight from the cup anyways.
@shondajohnson3787
6 жыл бұрын
Did you get your photo from Google. What program Did you use to get your photo into before you started printing.
@southernwondernc
6 жыл бұрын
Shonda Johnson no I didn’t get it from google. I like to make sure I pay the artist that does the work. I got this image from Etsy. In another comment I posted the link for the image. I also use photoshop. I’m sure any program is fine to use. I just have been using photoshop for over 12 years now. Happy crafting!!
@christinesawvell9447
5 жыл бұрын
@@southernwondernc I am not seeing the post where you shared the store on Etsy for the image
@southernwondernc
5 жыл бұрын
Christine Sawvell it’s somewhere in the comments.
@mahonnajames6931
5 жыл бұрын
Hello I am having a issue with sizing my picture correctly so it can fit I have 4a paper but can’t seem to get the size right
@southernwondernc
5 жыл бұрын
Mahonna James if you scroll through the comments, a couple people have gave the formula on how to size it.
@mahonnajames6931
5 жыл бұрын
Yeah I did someone said silhouette but can’t load it to long so I canceled it u have the same machine as I do how did you size it
@Csi807
6 жыл бұрын
Mine is not printing in color.. not sure why.. I am using an inkjet waterslide decal.. it only prints on white paper in color but not the decal.. any suggestions?
@southernwondernc
6 жыл бұрын
Ramona R not sure why it would do that. What software program are you using? When you print make sure all settings are checked. All you should do is enter the waterslide paper like regular paper.
@Csi807
6 жыл бұрын
Amber Johnson I am not using a software program.. I was just printing from my printer settings.. what software program should I use?
@southernwondernc
6 жыл бұрын
I use photoshop, but you don’t have to have it to print photos. Photoshop is $10.66 a month if you do want to use it. I would go through your settings on your computer and printer to make sure they all say print in color.
@lburdettro
6 жыл бұрын
Do you use glossy or matte seal for image?
@southernwondernc
6 жыл бұрын
lburdettro I use a matte seal.
@carmenrios4081
6 жыл бұрын
When you purchase the image, can it be resize?
@southernwondernc
6 жыл бұрын
Carmen Rios yes I resize in photoshop
@mahonnajames6931
5 жыл бұрын
How can u resize in photo shop can’t find it what size are you doing
@southernwondernc
5 жыл бұрын
I just used the size of the paper on this one. When you go into photoshop you can customize the paper size. Then hit print and you should be good. To resize to fit on a cup, I’m not sure how to do that. There is a link or someone had posted something to help with that.
@mahonnajames6931
5 жыл бұрын
Amber Johnson Hello that’s my issue how do you resize in photo shop I do t see where I can put in the number of the size I maybe overlooking it thanks for answering
@wandagassaway1693
3 жыл бұрын
OMG! It's so beautiful Where did you get your imagine if you don't mind me asking. Thank you in advance.
@shondajohnson3787
6 жыл бұрын
What to you spray your photo with before using it and placing it in the water
To make sure you I am right you pray it 3 times right on the photo.
@southernwondernc
6 жыл бұрын
I do just to make sure all the ink on the paper is sealed. It doesn’t need to be thick coats each time you spray on the paper.
@shondajohnson3787
6 жыл бұрын
Thanks you so much.
@southernwondernc
6 жыл бұрын
Very welcome! 😊
@dublintoo
4 жыл бұрын
Where do you find the pictures to even print out?? Do you just go to google with an idea and choose one or do you have to go to a certain website??? Can you use your own photos? I'm new to this waterslide/tumbler making process. This is awesome. I like the whole picture process. You were very patient!!
@southernwondernc
4 жыл бұрын
dublintoo the image I got in the video I bought off of Etsy. Somewhere in the comments is a link to that. You can go to goggle but I like to shop small businesses since I am a small business myself.
@elizabethbell6747
4 жыл бұрын
Where do you find a full image on the watercolor for a tumbler
@southernwondernc
4 жыл бұрын
Elizabeth Bell it was on Etsy. Somewhere in the comments I think I left a link for someone else.
@carrieneville2001
4 жыл бұрын
You may have already answer but what brand of water slide paper do you use?
after you applied the waterslide did you protected with something?
@southernwondernc
5 жыл бұрын
Katia Lizet I sealed it with epoxy.
@dedered6958
6 жыл бұрын
how do you actually trim the excess off?
@southernwondernc
6 жыл бұрын
Dede Red I use either scissors or box cutters.
@BigGuyCustoms
6 жыл бұрын
What are the dimensions you used for the slide?
@southernwondernc
6 жыл бұрын
MrRealGoodMan I believe this was 8.25 x 11.5 almost a full size paper. I wanted to make sure I covered the whole cup.
@teresaptp59
4 жыл бұрын
How did you put the glitter on it and thank you so much for sharing with us
@southernwondernc
4 жыл бұрын
Teresa Phillips I used mod podge and a paint brush. Dip the brush in the mid podge add where you want on the cup and then sprinkle the glitter!
@elljn4510
4 жыл бұрын
What is the lil brush called that you are using? Thank you
@southernwondernc
4 жыл бұрын
el ljn it’s actually a mod podge brush that I got at a craft store. But I never used it for that lol. I find it easier to move the water out with that brush. Not for sure if it has a name to it. I found it at Micheals craft store
@shondajohnson3787
6 жыл бұрын
What waterslide paper did you us and what do you like best
@southernwondernc
6 жыл бұрын
Shonda Johnson I found waterslide paper on amazon. I haven’t tested any other paper. I will find the link for you.
@southernwondernc
6 жыл бұрын
Shonda Johnson 20 Sheets A4 Size Inkjet WaterSlide Decal Paper Sheets Transparent Clear www.amazon.com/dp/B01GU0NPZK/ref=cm_sw_r_cp_api_xEBPAbHGAKV5Z
@shondajohnson3787
6 жыл бұрын
Thanks
@leighannromo5703
3 жыл бұрын
Hayes waterslide is good
@mahonnajames6931
6 жыл бұрын
Hello what size paper is that ? I have a beach cup I would like to do this with
@southernwondernc
6 жыл бұрын
Mahonna James it’s a little bigger than a letter size paper. 11.8x8 I think it is. Good luck and happy crafting!
@mahonnajames6931
6 жыл бұрын
Where did you buy this from
@southernwondernc
6 жыл бұрын
Amazon 20 Sheets DIY A4 Inkjet Water Slide Decal Paper Sheets Transparent Clear for Inkjet Printer Transfer Paper www.amazon.com/dp/B06XP7NZ62/ref=cm_sw_r_cp_apip_jrfkC8LTeauTU Make sure you read the label. There are clear and white water slide paper. I have both. The white water slide paper is for dark backgrounds.
@montseaguilar5266
4 жыл бұрын
What printer did you used? Can we use deskjet printer ?
@southernwondernc
4 жыл бұрын
Montse Aguilar yes you can use any inkjet or laser jet printer. Just make sure you get the right paper for what printer you have.
@ashleyarmstrong8289
6 жыл бұрын
Is this a cost effective way? How much do you charge for them? TIA
@southernwondernc
6 жыл бұрын
Ashley Armstrong I’m not sure what you mean cost effective way? Are you talking about doing one whole sheet of water slide paper? Just depends on your cost for the cup, paper and epoxy you use. After you add all that and then your time spent making the cup, that’s the price of your cup. Each persons price is different. If I had a person ask for this one I would prob charge now $50 or so.
@starrspoter
6 жыл бұрын
what typr of paper u print on?i see some print on tissue paper to is that easy?or they use the pattern from napkins
@southernwondernc
6 жыл бұрын
vicki jen I use waterslide paper. You can find it on amazon. I have never used tissue paper before. I have seen people do that before, but I haven’t.
@tracijudge657
6 жыл бұрын
What did you spray the paper with?
@southernwondernc
6 жыл бұрын
Traci Judge I have the rust-oleum matte clear enamel. You can use any clear sealer though.
@SweetT--
6 жыл бұрын
I use Krylon Triple Thick Crystal clear glaze
@Csi807
6 жыл бұрын
Can you tell me the name of the sealer.. I am searching for a safe one but it’s difficult to find? Thanks...
@southernwondernc
6 жыл бұрын
Ramona R FX is one or Pro Marine is another. You can find them on amazon.
@Csi807
6 жыл бұрын
Amber Johnson I couldn’t find these on amazon, are these sprays or epoxy? Not sure what comes after the names..
@southernwondernc
6 жыл бұрын
Ramona R Crystal Clear Bar Table Top Epoxy Resin Coating For Wood Tabletop - 1 Gallon Kit www.amazon.com/dp/B01LYK2NAG/ref=cm_sw_r_cp_api_QNtMAbZBRYSEQ
Hi Amber fantastic video thank you for sharing. I have a question for you. Could I use a laser ink printer to do this and still seal it? , would it work just as well ? Thanks again for your creativity 😀
@southernwondernc
5 жыл бұрын
Ladymandi69 xx yes you can use laser ink. You just need to read on the water slide paper if it supports for laser ink printer.
@mandiholmes69
5 жыл бұрын
Thank you for replying Amber x The hunt is on for a laser printer 😀
@southernwondernc
5 жыл бұрын
Good luck!! And happy crafting!
@Lv24whl
5 жыл бұрын
what about using a sublimation printer? would that work also?
@southernwondernc
5 жыл бұрын
sandi Lovitt it might. I don’t have one so I don’t know if it would work or not. I also wouldn’t want to break the seal with the heat.
@jmrcmama
6 жыл бұрын
What kind of paper do you use?
@southernwondernc
6 жыл бұрын
jmrcmama I bought it off of amazon. It just says waterslide decal transfer paper. Transparent/clear.
@BigGuyCustoms
6 жыл бұрын
Decalpaper.com
@jasavariraj3143
5 жыл бұрын
so super madam
@patrickprice9960
6 жыл бұрын
Can you post a link of the etsy shop you got it from I am only finding unrelated items to buy Thank you great work :)
@southernwondernc
6 жыл бұрын
Patrick Price www.etsy.com/shop/whiteheartdesignwww.etsy.com/shop/whiteheartdesign Thank you for watching! Happy crafting!!
@southernwondernc
6 жыл бұрын
Not sure why it won’t connect to the page, but type in Whiteheartdesign and it should come up.
@patrickprice9960
6 жыл бұрын
Thank you Amber I found it I have an Etsy Shop so I figured the link out Thank you so much Happy Crafting
Can I ask how the waterslide paper actually stays on? I keep watching tutorials and I'm not understanding how it doesn't just peel off! 😂 Oh and once it's been sealed how do you wash it? Is it durable for washing with hot water and washing up liquid? :)
@southernwondernc
6 жыл бұрын
Abbie Jefferson Hi there! Ok so water paper on the back side has a film on it. Once dry it stays put on the cup or what ever surface you place it on. You can peel it off if you mess up. Once you have it in the place you like on your cup, you seal it with epoxy. It can only be hand washed. No dishwasher!!
@abbiejefferson5612
6 жыл бұрын
Amber Johnson thank you! It just seems bizarre that the thin plastic would stick to a surface at all,even with a sealant over the top! Really lovely cups though,I'm going to have to get some and have a go!
@southernwondernc
6 жыл бұрын
Abbie Jefferson it’s so much fun after you figure out how it works! If you have any more questions please ask! Happy crafting!!
@tinaaltenau6669
5 жыл бұрын
Where do you get your image from is it just any pictures you find on google or help lol I'm so new at learning this I'm trying to find video's from start to finish 😊
@southernwondernc
5 жыл бұрын
Tina Altenau I find my images on Etsy. I don’t pull them from google because of quality.
@tinaaltenau6669
5 жыл бұрын
Amber Johnson thank you do u just type in waterslide images ?
@southernwondernc
5 жыл бұрын
You can use any image you want. You can use pictures of your family if you wanted to. It’s not just pertaining to water slide paper. Like the image in this video, I just looked up watercolor themes. It’s limitless on what you can put on water slide paper!!
@michellewalters70
3 жыл бұрын
Where can I buy this image?? My son would love it 🥰
@sunnybunny222
5 жыл бұрын
this was awesome!! i've been wanting to do a full cup in a water slide but i didn't know if it could be done...now i know it can. thanks so much for sharing!! what size of cup is that? Donna
@southernwondernc
5 жыл бұрын
sunnybunny222 I think that was a 20oz size cup.
@sunnybunny222
5 жыл бұрын
@@southernwondernc Thank you for answering my question. how large did you make your water slide, if you don't mind my asking? your cup is gorgeous!
@southernwondernc
5 жыл бұрын
sunnybunny222 to be honest I don’t remember. It’s been sooo long ago. Sorry.
@sunnybunny222
5 жыл бұрын
@@southernwonderncoh....lol...i'm so sorry...i didn't realize... :-) I guess since i have just discovered tumblers, i thought everything was new...lololzz... ;-)
@southernwondernc
5 жыл бұрын
sunnybunny222 no worries, I am about to do a new video on the water slide paper I have. So keep a look out for that.
@milagrosarango5614
5 жыл бұрын
Ok I tried this did not work out so well lol just a quick ? How did you the edges off?
@southernwondernc
5 жыл бұрын
Milagros Arango I think this would work better with a cup that is not oddly shaped. If it’s one shape all around it would work well. I’m not sure what you are wanting to know about the edges.
@milagrosarango5614
5 жыл бұрын
Amber Johnson how do you cut them off?
@southernwondernc
5 жыл бұрын
I don’t cut the edges. Not on this image I didn’t. You can hide them with other images, vinyl or paint. How ever you would like. It’s all up to you on how you want to decorate your cup.
@angiegonzales6505
4 жыл бұрын
Where do you get the image out it’s beautiful
@southernwondernc
4 жыл бұрын
Angie Gonzales somewhere down the line of comments is a link for the image.
@jessicamarolf6023
4 жыл бұрын
and spray it with plastidip glossifier it will make it SO much stronger
@lacherrie6166
3 жыл бұрын
Hello love your channel what type of printer do you use
@southernwondernc
3 жыл бұрын
Inkjet printer
@jimphalen6941
6 жыл бұрын
Amber, thanks once again for some great information. I thought I would pass this along to you. I'm not sure what type of template you were referring to on the 20oz tumblers but here is a tip. My daughter is able to use her Cameo machine for her pictures to any size she wants. I'm sure using the Cameo you could enter the dimensions of the cup and have them sent to your printer and not have to worry about having excess. Hope this helps out and thanks again for the info.
@southernwondernc
6 жыл бұрын
Jim Phalen oh that’s is great info, thank you so much! I don’t have a cameo, but I do have a cricut. It doesn’t give me much to go on since I need curve to my template. I can try photoshop, but just haven’t had time to create and play to make one. Thank you again for the info!! Happy crafting!
@mistyreagan5865
5 жыл бұрын
Amber Johnson you don’t have to have a silhouette. Just download the software. Use the warp feature and put in the dimensions and send it to your printer. You won’t be using print and cut, so you don’t have to turn those lines on.
@mahonnajames6931
5 жыл бұрын
Misty Reagan I have a cricut and having a hard time sizing what program do I need or how do I get it to make the picture fit the cup
@ashleeroserhine
5 жыл бұрын
wow you did that!!!!
@leighannromo5703
3 жыл бұрын
How do you get all the air bubbles out.
@southernwondernc
3 жыл бұрын
I would take a damp paint brush or even a paper towel and very lightly rub them out.
@mschantal9
4 жыл бұрын
what spray do you use to seal it.
@southernwondernc
4 жыл бұрын
chantal st pierre any clear spray paint.
@mschantal9
4 жыл бұрын
Amber Johnson thank you for responding.
@fawnnelson3369
4 жыл бұрын
I was just thinking that it might help to have your cup on the spinner (turned off) while doing this.
@southernwondernc
4 жыл бұрын
Fawn Nelson it’s easier for me to handle the cup and paper for me doing it this way. But I can see that the spinner may help others. Good tip!
@christfollower1029
3 жыл бұрын
You need to spray every 30 minutes with the clear coat, at least 3 times for the image to be sealed or it may run. You really don't have to wait an hour between coats, it dries pretty quickly.
@southernwondernc
3 жыл бұрын
Christine P many different ways you can go about it. I did I think two thick coats and it was fine.
@cindyroberts3171
3 жыл бұрын
Can you use ink jet instead of lazier
@southernwondernc
3 жыл бұрын
Cindy Roberts yes you can, but you need to make sure you get the right paper for the printer.
@yuselinmartin3502
3 жыл бұрын
I'm having a hard time with waterslides on dark color cups my waterslide comes out literary as see through and the image has no color pigment at all I'm getting frustrated I seal it with Rosteleum Matte just like you Idk
@southernwondernc
3 жыл бұрын
Yuselin Martin so if you are wanting to put a waterslide on dark, then you need to find the paper that has a white background. There are two different types of waterslide paper. There is transparent and then white.
@yuselinmartin3502
3 жыл бұрын
@@southernwondernc Thank you so much!!! That was my problem!!!! You're the best!!!!
@leighannromo5703
3 жыл бұрын
You can also spray the image white after you spray the sealer
@yuselinmartin3502
3 жыл бұрын
@@leighannromo5703 really? I have to try this!!! The whole section or just around the image?
@leighannromo5703
3 жыл бұрын
@@yuselinmartin3502 you would spray your whole waterslide with the white spray
@squirrelycreations
4 жыл бұрын
I think I would have to have 2 people to even attempt a full cup waterslide lol
@user-do5te2jf1t
6 жыл бұрын
Allowed in large measurements 50 cm width and 50 cm length
@ConnieCrochets
5 жыл бұрын
Use this to size your decal... www.templatemaker.nl/index.php?template=cone&source=dielines&lang=en
@forrester4323
6 жыл бұрын
Watching this gives me anxiety because of how she does this. Ugh.justnput the damn thing on already!
Пікірлер: 189