Love it, Thank so much. Please more tutorials like this one. Have a nice day.
@RVTPLUS
19 күн бұрын
Glad you liked it. Sure. If you would like to see any specific topic covered, let me know. 🌼
@russellbeaumont1172
5 ай бұрын
Super helpfull and so well narrated. Thankyou Ella
@RVTPLUS
5 ай бұрын
You're so welcome, and I'm glad you find it helpful.
@alisajjad1661
11 ай бұрын
Very helpful tutorial pls makes more tutorials on family creations
@RVTPLUS
11 ай бұрын
So happy it was helpful. Of course there are a lot to come
@alisajjad1661
11 ай бұрын
@@RVTPLUS thanks
@wickjon1844
11 ай бұрын
beautiful
@RVTPLUS
11 ай бұрын
Thank you
@maqsoodkhan2798
11 ай бұрын
Thanks a lot
@RVTPLUS
11 ай бұрын
Most welcome 🌼
@hanysmouel8597
4 ай бұрын
thanks a lot
@RVTPLUS
4 ай бұрын
You are most welcome
@NISHANTKUMAR_architect
5 ай бұрын
What if the bottom and lower have the different section, how to fix that
@RVTPLUS
5 ай бұрын
Well it could be possible if you consider the placement of the glazing in side the new profile.
@MsOldschoolone
3 ай бұрын
@RVT PLUS - do you know how to avoid a double profile in the middle?
@RVTPLUS
3 ай бұрын
By creating each loop individually and ensuring they are closed, you can resolve most of the errors. If you provide more details about the issue, I'd be happy to help you troubleshoot further.
@hu5tle-
11 ай бұрын
Ugh. I keep getting a "can't create sweep error".
@RVTPLUS
11 ай бұрын
Try to draw lines in one continuous loop and make sure they are long enough. Too small fillets also might cause this error.
@hu5tle-
11 ай бұрын
@@RVTPLUS will try that. I tried deleting all of my internal ones, but still no luck with that path.
@RVTPLUS
11 ай бұрын
I know it could be frustrating. Check if all of different loops are closed and trim them to be sure. Sometimes the error could be because of only a point. Also before using it in the main path test it on a straight line. I hope it works this time.
@hu5tle-
10 ай бұрын
@@RVTPLUS new question. Is there a way to apply a fill pattern or pattern to any of the line elements I create? For example, of an insulated component.
@RVTPLUS
10 ай бұрын
We can create lines with special Patterns, and also we can create the pattern itself too. If you want to change a line of a component, you can go to its category and change its line type or select it and from Modify tab and View section click on Override and change the Line Type. This video might also help. kzitem.info/news/bejne/16ujzYqasJapoGksi=ViuKmkTWVdvOacsD
@hu5tle-
10 ай бұрын
also, is it possible to only do an extrusion on 3 sides? I have a window with a flange on all sides except the bottom. Thanks
@RVTPLUS
9 ай бұрын
Sure You can. It is exactly like this, but you need to add more profiles around the main part. First draw it on AutoCAD or even on a paper and then try to model it in Revit.
@hu5tle-
9 ай бұрын
@@RVTPLUS I don't have or use auto cad. Not 3 sides of the profile, 3 sides of the window.
@RVTPLUS
9 ай бұрын
If you watch the video again, you will see that first we draw one side of the Window, and then we repeated it for the other part. You need to do the same for any part that you want to add. You can separate different parts with References and Parameters.
@hu5tle-
9 ай бұрын
@@RVTPLUS It looks like you have a window with more than 1 pane. I'm talking about a single paned window. See here >> kzitem.info/news/bejne/x6yfzpieoYilrI4
@RVTPLUS
9 ай бұрын
Well, it seems like you do all the parts correctly. Just instead of deleting the bottom part and drawing another one, First copy the sweep on itself and then delete the bottom part in one of them and in other one delete the other left and right and top part. This way their placement will be correct. But if I you do that, I think you will have extra parts where they reach to each other, so to fix it you can use Void Extrusion. Draw a cube and rotate it 45 degree and then apply it to both bottom corners. You must have 4 of them. Two for both sides of bottom part. One for the left side and last one for the other part.
@fouezdesign
11 ай бұрын
My god Ella... 😊
@RVTPLUS
11 ай бұрын
🙂🌼
@ahmadalmosa9397
11 ай бұрын
Thank you Could you raise this family for us?
@RVTPLUS
11 ай бұрын
You're welcome. I am looking for a way to share some files or families like this with you, but it is not possible now.
@fouezdesign
11 ай бұрын
@@RVTPLUSplease if so consider making a telegram channel, not just that YT is already integrated in it but also that it's Telegram and all the good features in it. My regards.
@RVTPLUS
11 ай бұрын
Good Idea. Sure I will think about it. Thank you 🌼
@laynerichardson2737
3 ай бұрын
I had to give up on this video as the narrator way too frequently just clicks through various things without saying what they are doing so you have to back up over and over again to follow the exact sequence of steps. It was frustrating.
@RVTPLUS
3 ай бұрын
Thank you so much for watching my video and for sharing your honest feedback with me! I'm sorry to hear that you had trouble following along - I understand how frustrating it can be when instructions aren't clear. I appreciate your patience and will make sure to double-check my video's clarity, providing more detailed explanations in the future. Meanwhile, I want to reassure you that those parts where I was moving quickly were just repetitive sketching, and I'll make sure to add more thorough explanations before and after those sections. If you have any specific questions or need further clarification, please don't hesitate to ask - I'm here to help!
Пікірлер: 39