Wow!!! That is the orange "beast" Vasto. Can't wait to see your new projects with this machine!
@PawPawsWorkShop
2 жыл бұрын
It is definitely a great machine. Thank you very much
@hansjurgen9971
2 жыл бұрын
Thanks pawpaw
@PawPawsWorkShop
2 жыл бұрын
My pleasure
@mbennett3226
2 жыл бұрын
Is the Openbuilds software compatible with the Xcarve machine? I have the 1000 X 1000 Xcarve and Easel software, I like the versatility I see with Openbuilds but I dont want to downloaded it if it will not control my Xcarve.
@scottnovak6107
2 жыл бұрын
Yes. I have same machine as you (with the X-carve upgrades)and it works great. I just started using Openbuilds and so far, I love it.
@PawPawsWorkShop
2 жыл бұрын
Yes, it will work just fine. Use the same process to save you gcode. To make changes go back to easel then download a new gcode and you’re set
@mbennett3226
2 жыл бұрын
@@PawPawsWorkShop Thank you so much for the reply and the information.
@mbennett3226
2 жыл бұрын
@@scottnovak6107 Thank you so much for the reply and the information.
@scottnovak6107
2 жыл бұрын
@@mbennett3226 no problem. Happy carving
@charlesviner1565
2 жыл бұрын
Love your videos 👍
@PawPawsWorkShop
2 жыл бұрын
Thank you very much
@timgerman3340
2 жыл бұрын
Hello, I want to buy a CNC engraving with laser. I'm ready to spend good amount of money for a good CNC machine. Currently I am looking at FoxAlien 4040. Could you recommend me some good options from other brands?
@PawPawsWorkShop
2 жыл бұрын
The 4040xe is a good solid machine. I would suggest adding the laser and perhaps the rotary roller. You will need the Lightburn software for the laser. It’s only $60 and is excellent. One of the best software for the is VCarve Desktop. As far as a sender to control the CNC I suggest UGS (universal gcode sender) or the Openbuilds sender, both are free.
@bryanwiley7345
2 жыл бұрын
Wow
@PawPawsWorkShop
2 жыл бұрын
Thank you. Glad you liked it
@bryanwiley7345
2 жыл бұрын
@@PawPawsWorkShop and I really want a vasto now
@scottmeyer5912
2 жыл бұрын
will the dewalt 611 spindle holder work on masuter 4040?
@PawPawsWorkShop
2 жыл бұрын
No, the Masuter is a lightweight entry level hobby machine that cannot carry the weight of the dewalt 611
@Multiriddick007
2 жыл бұрын
Great video. I do have a question. Am i able to save gcode on Easel only if i'm subscribed? For some reason when i want to save a gcode it says free trial expired and brings me to their subscription page.
@PawPawsWorkShop
2 жыл бұрын
If you are getting that message then you will need the the Pro version. Please confirm with the Inventables team. I do not work for Inventables.
@johndiego3105
2 жыл бұрын
PawPaw, I have the 4040- xe. I was trying to set my exact carving area in UGS and easel using the PC. I hit the limit switches on purpose in both programs but couldn’t figure out how to reset the alarm so I could continue without shutting the machine down. What is the process to do it with out having to shut everything down?
@PawPawsWorkShop
2 жыл бұрын
Just hit the unlock in ugs then try and try moving the machine. It may trip again. Just repeat the process until the limit switch is free
@johndiego3105
2 жыл бұрын
@@PawPawsWorkShop ok will do, thank you very much!
@scottnovak6107
2 жыл бұрын
I tried using UGS (from GitHub) and it would shut off in the middle of trying to set it up. I searched KZitem for videos on UGS installation and set up and I “accidentally” found the Openbuilds program. I installed it and within minutes, I was able to carve my very first 3D project and it came out great. The only issue that I had was that the text did not carve. I don’t know what I did wrong. Could you possibly do a tutorial on using openbuilds? Thank you sir for another great video
@PawPawsWorkShop
2 жыл бұрын
Just a quick note, you also must have Java on your computer. Many do already, however, you need to check it out
@scottnovak6107
2 жыл бұрын
@@PawPawsWorkShop Yes sir. I downloaded Java and still had the same problem. I’m sure it’s operator error.
@RockinCrawler
5 ай бұрын
Can you do Portiats with Alien 4040-xe??
@PawPawsWorkShop
5 ай бұрын
Yes, it all in the software that you are using
@davidharris425
2 жыл бұрын
I would love to see a video on how to setup open builds on the xcarve 1000x1000 if you can Thanks
@PawPawsWorkShop
2 жыл бұрын
It will be exactly the same as I did with the FOXAlien VASTO
Пікірлер: 33