Thank you for the ideas. I have worn seats by thinning the inside of the plastic in order to preserve the texture. Your idea is great as well.
@robgsouth2293
4 жыл бұрын
I just found this video. I wanted to say Thank you for sharing this. Great tip!
@DansScaleModelCreations
4 жыл бұрын
RobG South hope it helps you out Rob.
@MapleLeafCustoms
4 жыл бұрын
Hi Dan, that was an excellent tutorial on weathering interiors and I'll be using that in an upcoming build. I do mostly 1:64 stuff, much smaller, but now and then there's a piece that lends itself to this kind of detail. You're very skilled and a good teacher. I'm subbing to you now (#7.4K +1) and hitting the notification bell for future updates. Be safe, brother. Greetings from Switzerland - Andrew
@chrisreynoldsartwork
10 ай бұрын
I find makeup sponges work good for seat foam poking through holes. Just stain them with watered down paint and it looks just like the seat foam...
@dennisshappka2440
3 жыл бұрын
Hi Dan, wow, Im so thankful i came across your page. Great tipps
@dixonhayes7504
Жыл бұрын
Great video Dan! Plan to use this on an unstalled project soon, depicting a car mentioned in a song.
@DansScaleModelCreations
Жыл бұрын
Thanks, and good luck on your build.
@BigAsDiecast
4 жыл бұрын
Awesome video my friend! Thanks for sharing your talents with us. Count me in as a loyal subscriber. Take care and God bless you and your loved ones during these challenging and uncertain times my friend. 👋😃
@styrenereplicas53
5 жыл бұрын
Super how-to Dan. Thanks for taking the time to make this video. Dave
@flyingfortressrc1794
2 жыл бұрын
Wow I've never seen this technique before. Very cool.
@kerryadams8922
5 жыл бұрын
I was one of the guys who asked for a tutorial on the interior and you did not disappoint thank you so much Dan as others have said I have missed your videos so happy your back.. Kerry.
@DansScaleModelCreations
5 жыл бұрын
Thanks Kerry, glad you liked it.👍
@CarDreamsinStyrene
5 жыл бұрын
Hi Dan.... just great to see you back .... fantastic tutorial .... thanks for sharing
@DansScaleModelCreations
5 жыл бұрын
Thank you my friend.
@twistedplasticfanatic9534
Жыл бұрын
Great video Dan!! Very informative and will have to try this on future builds. Thanx for sharing!!
@stevedubuc9082
2 жыл бұрын
Thanks for all the great information Dan! You 🎸 🤘
@wwkdiecastmore5647
5 жыл бұрын
This was great Dan, thanks for showing us!...Bill
@shawngulzow1968
3 жыл бұрын
Thank you. Great techniques!
@BloodyHatchetz
2 жыл бұрын
I subscribed. Nice video. I have also used the wire from a bread tie and made a spring sticking up through seats. Also using ground cinnamon for rust powders. I left a like
@doozersmodels3193
5 жыл бұрын
Very cool tips... appreciate your time... thank you
@DansScaleModelCreations
5 жыл бұрын
Thank you for watching. Cheers
@poppysrcandmodels
5 жыл бұрын
Fantastic tutorial Dan! Great technique!👍😎👍
@DansScaleModelCreations
5 жыл бұрын
Thank you, and thanks for watching
@thomasseifried4445
5 жыл бұрын
Many thanks for the show and the tips
@ronstewart9792
5 жыл бұрын
That is great Dan, Ron
@thomassoltis5862
5 жыл бұрын
Awesome brother keep up the awesome work
@MrsuperJerbear
5 жыл бұрын
Thank you for the video. Great job.
@DansScaleModelCreations
5 жыл бұрын
You got it Mr. Jerbear. Fun fact, we used to have a local radio announcer here that went by Jerbear. His real name was Jerry Lawerence. Trust story 😆
@chrisbontz9265
4 жыл бұрын
I been doing it wrong for years. Always used. Regular tp. But the stuff rips really easey. Going to deffently try this next time. Thanks for sharing.
@BloodyHatchetz
2 жыл бұрын
I used tp alot , works good
@ODGColornChrome
5 жыл бұрын
Great tips bud!
@montydavis6046
5 жыл бұрын
Dan, Thank you so much. I will give this a try soon.
@garyparker2969
5 жыл бұрын
Thank You Sharing These Wonderful Tips Sir n God Bless All
@DansScaleModelCreations
5 жыл бұрын
You are very welcome Gary, thank you for watching.
@garyparker2969
5 жыл бұрын
Y W Sir
@deakonschlicker3700
5 жыл бұрын
Thank you soooooo much i really needed this video and you helped me out sooo much really appreciate it man
@samuelvasquez8170
5 жыл бұрын
Thanks for the tutorial
@nastarannaserpour711
2 жыл бұрын
👍👌🌹❤
@BullmanBuiltRC
9 ай бұрын
Great video. One question though. Is there a rave or dance party outside your workshop? Lol😂
@olegnazarko9762
3 жыл бұрын
also can add some cotton to immitate filling of the chair,sorry for my bad english..
@oldmancrow6676
5 жыл бұрын
Hey man thanks for the helpful tips. I do have a request. Can you do a tutorial on how to get the exposed foam look on the sides of the seats? Maybe an exposed seat frame?
@DansScaleModelCreations
5 жыл бұрын
Just use the same process on the underside of the seat and paint it a flat yellow/brown. Or you could just use colored tissue paper as well. Let know how it turns out
@zyairemax3808
3 жыл бұрын
I know im asking the wrong place but does any of you know of a way to get back into an Instagram account..? I was dumb forgot the account password. I appreciate any tips you can give me!
@camdyndash6000
3 жыл бұрын
@Zyaire Max instablaster =)
@zyairemax3808
3 жыл бұрын
@Camdyn Dash I really appreciate your reply. I found the site thru google and I'm in the hacking process now. Looks like it's gonna take quite some time so I will get back to you later when my account password hopefully is recovered.
@zyairemax3808
3 жыл бұрын
@Camdyn Dash HOLY **** IT ACTUALLY WORKED! Literally got access to my IG account details within roughly 30 mins by using the site. Thanks so much you saved my account :D
@dondrury9957
2 жыл бұрын
This is awesome! One question: how do you make the color of the seat look old? I love this weathering method and plan to use it but still not sure about color.
@DansScaleModelCreations
2 жыл бұрын
Hi Don, once i apply the color that I want the seat to be I will then apply Tamiya black or brown panel liner and this will stain the paint and make it look weathered, I will also use thinned Tamiya flat black as a wash after I clear coat the paint and panel liners. I would suggest just practicing on some scrap until you get the results you are looking for. Good luck and have fun 😆
@kenpoist7
5 жыл бұрын
Hi Dan, awesome stuff. I'm new to this art (haven't done this for 50 years), what do you do with all of these projects once completed? Due to the size and real estate of your hobby room, storage constraints must be horrible between finished projects, projects in the works and new kits still in the box not to mention the work area required. Thanks
@DansScaleModelCreations
5 жыл бұрын
kenpoist7 Hi Ken, my builds are in display cases and really do not take up too much space. New kit are all stored on shelves in my build room, I currently have approximately 100 unopened kits that take up approximately 5 shelves. I always only have one project on my bench at any given time. Welcome back to the hobby.
@rinchannel1101
5 жыл бұрын
👍😍‼️
@gottabsleeved
3 жыл бұрын
do you do 1:18 diecast for people if they send you the cars along with your fee ofcourse?you on FB ?
@HartRaver
3 жыл бұрын
If you know a guy with PLA 3D printer,then PLA can be treated the same way for stretching
Пікірлер: 57