Everyone give this man a like for such a straight to the point and helpful video
@nycprodigy485
2 ай бұрын
Agreed and done
@BCElginTex
6 жыл бұрын
Woo Hoo. I just made my first two connectors and the internet is working in our new out building. Thank you so much.
@JK-cn5fy
5 жыл бұрын
You forgot a MAJOR step in this video. You're supposed to waste the first 5-10 minutes telling use lots of pointless trash; i.e., where you went to elementary school, your dogs name.... You get the point. Instead, you got straight to the point and didn't waste my time. Get it together before you make another how to video!
@adamhussain3928
3 жыл бұрын
Just shut the fuck up oh my daze
@taufiqpurba
3 жыл бұрын
@@adamhussain3928 really?
@1165TheLeon
3 жыл бұрын
JK you’re gay, fuck out my way.
@rissandimo
2 жыл бұрын
This comment deserves more likes
@reddfloyd121
2 жыл бұрын
he also didn't try to do a bunch of corny improv for the camera, 0/5
@RRWOrtiga1
Ай бұрын
Thanks for demonstration, after a decade of being challenged on this task as a Colorblind (Difficulty with light color), I was able to verify with packaged ethernet cable on the coding. Please keep it up and thanks again for the tip. 🙇🙇🙇
@jamesshort5812
4 жыл бұрын
Brilliant video due to a house flood we are hard wiring our home. Your video was great and I especially like the graphic for colour order you put into nicely explained clearly and clear good focus video too. Thank you from the UK.
@alexf.3014
4 жыл бұрын
I bought a cheap cat 5e/6 connector kit on Ebay (tester, connectors and crimping tool) but had no idea how to use it. You just taught me how. Took me about 6 tries to get it right but I did it! I just hardwired my wife's home office and 2 bedrooms upstairs. With my new ethernet connector IT knowledge I also Added some Ethernet switches throughout the house. No more streaming issues. You are the man. Thanks for this extremely useful video 😁!
@Eleventy
3 жыл бұрын
Thanks for the video! Btw, the wiring shown in the video is for T-568B. In my case, I had to use T-568A where striped green and solid green are first due to the wiring of the cables to the jacks in my house’s wiring closet, otherwise my cable tester indicated the cable was a crossover.
@rothweiler
Жыл бұрын
As long as both ends of your cable are terminated the same, A and B can be used interchangeably. There is anecdotal evidence that the B standard has less crosstalk in certain implementations requiring very high bandwidth but nobody has been able to measure any difference. He does need to at least mention that there are two standards though - some organizations have their policies requiring use of a particular one.
@thomasappel2973
4 жыл бұрын
Very simple and straight to the point, great vid.
@Candifference
6 жыл бұрын
Very simple video, got straight to the point no unnecessary explanations. Thank you.
@RidinDirty86
3 жыл бұрын
Gave enough info during the first minute and a half to get me through the job. Very succinct. Keep up the good work on any future repair videos
@Joskapistanyaad
3 жыл бұрын
Very nice and straightforward instructions. Especially that picture about the correct wire order is very useful. The wire order is what one can't figure out by common sense.
@chazzd813
3 жыл бұрын
Thank you... I did my first two running a 100 ft of CAT6 and it worked!!!!
@HedelTorres
2 жыл бұрын
Funny how easy you made it look... other vids have so many steps that i feel like i have to pause it at every step.. this was so straightforward... thanks...
@Djacob_
2 жыл бұрын
Thank you. Prefect little refresher for the evening. Now I’m ready to instal that camera system tomorrow.
@thebaconbaba
3 жыл бұрын
Thank you for the simple clean video. Very nicely explained. Helps enthusiastic noobs like me to diy a home network. Keep it up
@ellecue
2 жыл бұрын
Thank you for posting this video. It helped me repair my ethernet cable.
@toastedzen
5 жыл бұрын
Hey thanks a lot, this video was concise and perfect for my needs. It’s been a number of years since I’ve had to do this so thanks for the how to!
@StephenJayGoodman
3 жыл бұрын
thanks for the video. Haven't made a connection in years so this was a great refresher.
@rishirathod31415
10 ай бұрын
Thank you. It helped me in my A+ preparation
@abdulhusseinabdulhussein8047
2 жыл бұрын
Nice and short. Up to the point. A big thank you to you
@benlefler6304
3 күн бұрын
Thanks this really helped
@ErikLiberty
3 жыл бұрын
According to the instruction kit I bought, you want to cut the little conductor wires to 1/2 inch (13 mm) long.
@MrSpodULike
2 жыл бұрын
Perfect instructions sir! SuperMegaFast internet connection in my garage - the other side of a 4 ft wall! Thanks :)
@Rockstars-Gig-Memorabilia
5 ай бұрын
Thanks for a great how to video...
@rajinikanth87
2 ай бұрын
It's clear and useful thank you🙏
@benlefler6304
3 күн бұрын
You're great keep it up
@seaskimmer
Жыл бұрын
Great video, especially the instruction on wire order, thanks.
@theflyinghamster8442
4 жыл бұрын
Thank you, that really helped me
@PTJEE
3 ай бұрын
thank you boss for making it to the point
@deoplo5988
3 жыл бұрын
Very concise tutorial. Thanks!
@rainbash81-ttv95
2 жыл бұрын
about to install survelience in my house and i have poe cameras, going to invest in a box of cable and crimpers and give it a go. will find out soon enough if im successful :) much appreciated.
@mickgatz214
3 жыл бұрын
Good and honest video bro!..... Greetz from Australia. :)
@steamdwarfjr5475
25 күн бұрын
Thanks. Very helpful.
@tristanpatterson3843
3 жыл бұрын
I just riuned 10 connectors, probably the hardest thing I've tried in my life.
@hamzapuris
2 жыл бұрын
Great video, straight to point!
@eviljav00
2 жыл бұрын
Thank you, I'll try!
@rissandimo
2 жыл бұрын
Super informative and straight to the point, thank you!!!!!!!!
@aldrichallenbarcenas6740
3 жыл бұрын
For some reason it always take me hours to do this to crimp them and I have a all the right tools with me.
@vinagnihotri
3 жыл бұрын
Will this order work for attaching cat6 cable from router to PC? Thank you.
@kqvanity
3 жыл бұрын
Great video
@SreedharSParigi
4 жыл бұрын
Thank you so much. It helped.
@louisp.3332
6 жыл бұрын
The tool u are using has a built in sheath stripper did u know this? So was no need to using the first tool AND u wouldn't have cut wires too short as the Trend Tool is measured for length. So u would insert cable, close, remove wire and the outer sheath is cut exposing the 8 smaller wires to the EXACT length:)
@TheRealCrappyGamer
6 жыл бұрын
In my experience in using these built in strippers, is that they end up cutting into the inner-wire as well. In theory, you put the cable through and cut it off on the one side, then when you release it it has scored the outer insulation so you can just pull it off. 90% of the time, the blade has also went into the inner-wire as well making it either 1.) broken, or 2.) brittle, exposed. It's best to use a dedicated stripper like he did in the video. After doing it for a while, you get a good feel for how long you need to make it.
@motomarmot6544
2 жыл бұрын
Thanks
@brabantstraat
5 жыл бұрын
Thanks, worked out perfectly on the first try! One thing you don't mention is that the individual wires are not always so clearly marked as in your example. In my case, I needed a magnifying glass and some imagination to identify the different color wires. But it all worked out.
@Matt-ve2xx
3 жыл бұрын
great video. Question - Are cat 5/6 wires the same colour in the UK and USA?
@adic8303
2 жыл бұрын
Thanks bro really helpful
@rectify2003
3 жыл бұрын
What connects the crimp contacts to the wires, as you didn’t strip the cable coloured wires?
@filmeezaan4237
3 жыл бұрын
VERY GOOD
@KM-gh3ob
4 жыл бұрын
Easy thanks again👍👌
@franklindiaz4411
4 жыл бұрын
Excellent video..👍👍👍👍👍.
@henninb
6 жыл бұрын
Instructions worked perfectly, thanks.
@jprhino6665
3 жыл бұрын
Damn awesome man, thank you
@chen831
3 жыл бұрын
Thank you.
@ChrisM-wv4gs
3 жыл бұрын
does untwisting the pairs cause any issues ?
@BUBBENVAN
4 жыл бұрын
Excellent
@bashmedia
3 жыл бұрын
thanks
@dmac5678
2 жыл бұрын
is this for a straight through or crossover cable? The other side of the ethernet cable would be the same color convention?
@MrSpodULike
2 жыл бұрын
I wired as he instructed - same colour layout at each end - and it produced a regular network cable (non switched/crossover). Unless something strange is going on in the cable itself, then for a regular network cable you could probably put the colours in any order you like! - although someone out there probably would tell me otherwise!
@MrRGBable
4 жыл бұрын
Thanks!
@walexsyfigueroa1146
4 жыл бұрын
nice cate5
@michellegrover8282
3 жыл бұрын
It's not working for me. My tool cost 40 euros. Is that considered a "cheap" tool? I've only tried twice, but based on other people's comments, I shouldn't have had a problem. Tips?
@juhanlami8920
3 жыл бұрын
what was the first device ? what it is called .. from which you cut strip off cover of the lan cable to trim ? @ 0:49 timeline
@Loki-gf5qw
3 жыл бұрын
A crimper and wire stripper I'm pretty sure.
@saile1011
2 жыл бұрын
my cable end was all melted and messed up so i did this, checked the pins were in the right order and my cable still doesnt work ); thanks anyways great tutorial
@PTJEE
3 ай бұрын
I am about make my first connection will update in a few minutes, omw home
@PTJEE
3 ай бұрын
it workeddd perfectly, i just my made my first 5ft ethernet cable. thank you boss
@Shotti_RG
4 жыл бұрын
Thx bro
@jprhino6665
3 жыл бұрын
Pause at 1:40 if you need to.
@abhijtdebnath6150
6 жыл бұрын
Perfect....
@malanalan1
2 жыл бұрын
Why did that guy use separate tool for wire stripping? That crimp tool can be used to strip wires? Hmm? Didn't he know that?
@NjabuloHadebe
6 жыл бұрын
Im not getting any link light.. please assist whats missing? I tried 568A and 568B but still no link light, my Cat ate the cable so i had to cut from where it was damaged and crimp using the crimping tool but IT JUST WONT SHOW THE LED LIGHT ON MY LAPTOP ANYMORE LIKE IT SHOWED BEFORE😢
@aaftech2147
6 жыл бұрын
Pious Hadebe make sure to fully inspect your cable from end to end. Also, check to see if the white/Orange is to the left with the jack pins facing up
@m.g.v.
5 жыл бұрын
That's why you have to have a Ethernet cable tester
@tikoblocks3224
2 жыл бұрын
Lining them up like that is horrible. Its way easier to put them in one by one, then crimp.
@webpro607
2 жыл бұрын
you cut it toooo short
@halotec1232
3 жыл бұрын
u cut the cable LAN too short bro
@dudds6699
4 жыл бұрын
your crimping tool has a wire stripper and cutter. You have failed your audience about differences. Still can't not give a like as you have successfully by passed my college pain.
Пікірлер: 91