Don't forget eye protection, I had a piece of metal go in my eye while blowing the shavings off the car and have a scar on my eye now.
@antscaledesigns
8 жыл бұрын
Glad someone is concerned about keeping the work in shot! Nice one!
@Mycustomhotwheels
8 жыл бұрын
Cheers bro! 🍻
@visedbarbecue6633
7 жыл бұрын
This looks like a pretty wicked hobby to get into. I used to have hundreds of hotwheels when I was in elementary school. Who'd've thought I'd still think hotwheels were still cool all these years later.
@DaKoalaBoi
2 жыл бұрын
I hope your doing good mate
@luckydog20
7 жыл бұрын
That is sweet, I've never done a swap myself. Would love to try it, and thanks to you you've taken the fear of making a disaster of it. I will seriously thing about giving it a shot. Thanks again, great video, look forward seeing more.
@5cbst
7 жыл бұрын
I just picked up a couple of Hotwheels 180 SXs from big w today and plan to customize one of them. I liked you fast video mate. Subscribed! 1:64 collector
@ShovelTownRC
7 жыл бұрын
good stuff man! just started customizing so this helped a lot!
@kristainsandoval5640
3 жыл бұрын
Thanks for actually providing a video where we can actually see what you are doing! great job!
@samkoopmann8833
4 жыл бұрын
Where do you get your rims
@elliotredding6164
8 жыл бұрын
good to see no glue haha keep up the good work!
@CaliToys
7 жыл бұрын
I add a like in addition, thank you
@saltyyy964
8 жыл бұрын
your still inspirering
@Mycustomhotwheels
8 жыл бұрын
respect man! thank you👍😊
@tunerworkscustomdiecastgar1938
8 жыл бұрын
Sick Glad to see you got the channel back up. Cheers
@pukeoid
3 жыл бұрын
Where can i find the supplies Like the wheels and axes?
@MayorgasHotWheelsWorkshop
3 жыл бұрын
Great video, yes I have tried 3 different ways to swap wheel, this is the right way.
@kellybebenek
5 жыл бұрын
ima try to swap the rear wheels of a raptor for dualies
@Geeksiders
4 жыл бұрын
Man you make it look so easy. My drill must really suck.
@lesleygarforth7399
6 жыл бұрын
Where do you buy your time from
@Rattlehead17007
4 жыл бұрын
Couldnt u use a screw driver and take the bottom off, then slide a new pair of wheels into the hinges and screw it back on? Edit: i see now, there not screws
@levicoleman5312
7 жыл бұрын
where do you get the wheels from I can't find any that look like that
@RiverasHotWheels
8 жыл бұрын
Cool tutorial buddy. Subscribed 👍🏽
@Mycustomhotwheels
8 жыл бұрын
Thanks Rivera, much appreciated brother
@Utubecritic111
7 жыл бұрын
Rivera's Hot Wheels you stupid
@christopherkatz9484
6 жыл бұрын
Nice job, can't wait to try it.
@joshlee4472
5 жыл бұрын
How do you fasten the top back on?
@BillyCLeWorth
8 жыл бұрын
OK video but I have to ask what happened to your thumb nail ? I've crushed both of mine , had them die and grow back , ( thankfully ) but yours look really fucked up . I'm not trying to be mean , I'm just curious .
@Mycustomhotwheels
8 жыл бұрын
LMAO No offence taken my man - I bite my nails like a MOFO - that is all, and yes that gross look is the result of 38+ years of biting away. I have severe adult ADHD and dont think I will ever be able to stop LOL
@BillyCLeWorth
8 жыл бұрын
My Custom Hotwheels Sorry , I had to ask but I thought you might have hurt them with a power tool or something .
@felicitasdelgado5908
8 жыл бұрын
subscriber 232 thanks i made a badass custom lambo venom with monster wheels 👍✌
@Mycustomhotwheels
8 жыл бұрын
Damn that sounds crazy awesome - you on Instragram brother? Tag the pic with #mycustomhotwheels and I can find it (y)
@pizzatime9196
6 жыл бұрын
Guess there's no way I can start making customs until I'm old enough to use a drill.
@ketchupandfries5383
7 жыл бұрын
Thanks for the help😂 i love youre channel
@d.allasss6923
8 жыл бұрын
Nice Vid!. What wheels did you use?? They would look good on my old M3.
@Mycustomhotwheels
8 жыл бұрын
these are the 5 spoke real riders from ages ago - ones you find on the original 308GTO and 288GT Ferrari Garage and Retro series (for example)
@DatOneCat
7 жыл бұрын
Out of curiosity, if there was a chance that the pins broke in the process and the axles are very loose when the car is back together, what should I use to keep the axles stuck to the base and not moving about?
@Mycustomhotwheels
7 жыл бұрын
I find the easiest way is to hold the car together (upside down) and drop a small drop of superglue into the concave area of the drilled out rivet (assuming you didn't royally screw the drilling process and there is a mm gap around the hole in which case you're stuffed and have to drill a small hole and use a screw) but assuming this is not the case then hold the car for a minute or two until the glue sets and then it will hold just like a rivet. THe best part of this method is to remove it again you simply drill out the hardened superglue as if it was a soft rivet
@DatOneCat
7 жыл бұрын
Oh whoops, by "pins" I meant the axle clamps. Since I've been planning out a custom on a recent car, but the axle clamps broke off while taking the wheel axles off. So when I do put the set off wheels back in, the wheel axles wobble alot/don't stay in place when I put it back together. Is there a way to prevent this?
@Mycustomhotwheels
7 жыл бұрын
Superglue (again) OK but listen carefully ya Grumpy rabbit sonnova! :p ...First place the car so that the wheels can sit each side of the base and hang freely - I usually use a rubber (eraser) for this as the standard rectangle eraser is the perfect size...anyway. place the axle with wheels attached in the axle groove and let the wheels hang on each side. Then place a small ball of bluetac on each far end of the axle. This will prevent the superglue running down the axle and into the wheels stopping them turning. Then apply one drop of glue and let it set. Once set remove the bluetac and your axle is secured and your wheels turn freely ;)
@DatOneCat
7 жыл бұрын
Thank you. That's sounding a little fiddly but I'll give it a try.I think I'll go hunt for Bluetac tomorrow if ever they have it in hardware stores over here. By the way, when painting a car, do you need to scrape all the paint off? Or is it ok to leave the old paint on and spray over it? (I use spray paint). And after painting, do you need to clear coat the paint? Or could you leave it as is?
@Mycustomhotwheels
7 жыл бұрын
no always remove old paint as you will never get a decent coat going over an old one Just buy some Paint Stripper in a tin format and then hold the car with pliers and dip it into the top. Coat it in the stuff and wait 5 minutes. Then blast it all off with the hose and hey presto - no more paint
@belascott2406
7 жыл бұрын
i subscribed it was really helpful
@paperbag7137
5 жыл бұрын
My drill is a black and decker the hammer drill version.....i have a 3/16 drill bit but comparing it to your video mines smaller and also it took like 2 days to make it turn into a plate looked one.......please help
@HotWheelsPlayaz736OFFICIAL
8 жыл бұрын
Awesome! Thanks for the help! Are you aussie?
@Mycustomhotwheels
8 жыл бұрын
I am brother... sorry I mean maaaaaaaaate :D
@HotWheelsPlayaz736OFFICIAL
8 жыл бұрын
Haha! LOL
@IDk-we1dx
7 жыл бұрын
My Custom Hotwheels dude is there another way to remove the base..because I don't have that tool!
@davewalker3561
5 жыл бұрын
Looks like you learned about safety after you got your thumb. 😆
@fennexx5796
3 жыл бұрын
i might need help on what wheel to get, every good one with rubber tyres and everything ships from china which is too long, are resin wheels good? that the only thing I can get I n UK
@Mycustomhotwheels
3 жыл бұрын
Https://diecastmods.com - good mate of mine and I cannot fault his wheels. Incredible quality. Tell him I sent you
@Mycustomhotwheels
3 жыл бұрын
Resin is ok...3D printed with real rider rubber is the best and cheapest...huge variety too
@boykaramirez0523
7 жыл бұрын
Where did you buy the new tires...???
@mlite_33
4 жыл бұрын
how would u do this on a metal base?
@ChopsRocks302
5 жыл бұрын
Does this method also work on Hot Wheels w/ metal bases? I know that the plastic based cars can "snap" back on to the rivet (as long as the rivet head is drilled out/removed properly), but I'm wary of trying this on a car w/ a metal base. If possible, I'd like t avoid having to tap the rivet base for a new rivet or screw.
@ChopsRocks302
5 жыл бұрын
I guess as long as I get my drilling done properly, I can always superglue if the metal base doesn't want to snap back on to the drilled out rivet bases....
@kosmokat111
6 жыл бұрын
not a bad way of doing this, but I think I'm gonna go with BaremetalHW's method, more time consuming, but it's cleaner for sure.
@bodagger805
3 жыл бұрын
What type of BMW is that?
@kevalinehdusail6751
6 жыл бұрын
Hello! Would a pin vise work?
@xragegaming9299
8 жыл бұрын
where do you get your wheels at
@nestop.9892
8 жыл бұрын
what is the name of those wheels? where could i get them? they look fantastic, amazing job. thank you for sharing
@Mycustomhotwheels
8 жыл бұрын
they are the new real riders from the Japan Historics series... they are hellasweet hey 👌
@RiverasHotWheels
8 жыл бұрын
Look at your purple Mazda from the Japanese historics that I sent you. Now you know 😁
@nestop.9892
8 жыл бұрын
Rivera E Haha yeah bro thsnk you, that was long b4 o knew, i just kept seeing people with loads of those wheels.. thank you carnal
@datzed
8 жыл бұрын
+My Custom Hotwheels Where does one get these series of hotwheels? Your from Australia based on your accent (So am I). I've only ever seen the standard hotwheels range at my Target/BigW/KMart.
@RiverasHotWheels
8 жыл бұрын
+datzed eBay. Search hot wheels Japanese historics. These wheels are off the purple Mazda casting. Really cool wheels.
@RobertJohnson-vf8cl
8 жыл бұрын
well done….!!!!!
@oswaldvargas7294
6 жыл бұрын
Where can I buy the wheels?
@fennexx5796
3 жыл бұрын
Where can I get custom wheels
@charlesmclaughlin2281
5 жыл бұрын
Where can I get wheels from
@anupa_de_silva
7 жыл бұрын
Where can I get those wheels
@i3diamonds
5 жыл бұрын
Why not use a 5/32 drill bit?
@fennexx5796
3 жыл бұрын
How do you still thru so quick, it takes forever for me to still even at full speed full force
@bumble_rumbles
3 жыл бұрын
Bad bits and or drill then. Or it's on reverse
@sheltube
7 жыл бұрын
I have my project cars, just need the tools. Where do I find them and how much are they?
@Mycustomhotwheels
7 жыл бұрын
you will find all the answers to your questions in this one massive article I compiled: mycustomhotwheels.com/beginners-bible/
@SearchEast2069
7 жыл бұрын
so i just tried my first wheel swap and everything when wrong. what do you do when the tabs holding in the axles are metal? I tried everything to get the axles out without having to cut them, but I failed and had to cut them and ended up cutting them too short. Super discouraging
@masterson2546
5 жыл бұрын
It's been 2 years do you still have this as a hobby?
@puresomenessd2146
3 жыл бұрын
It's been 4 years do you still have this as a hobby?
@aimanishak4364
2 жыл бұрын
It's been 5 years do you still have this as a hobby?
@discordmykong4314
6 жыл бұрын
Good ways looking like real riders
@v1rgaa
7 жыл бұрын
Agreesive
@horsepowerenthusiast6933
7 жыл бұрын
How do you reassemble the car?
@matess3655
7 жыл бұрын
superglue
@horsepowerenthusiast6933
7 жыл бұрын
Matěj Předota Really? Just superglue? No button head screws? Could that be an alternative or that's the only option?
@F4collector
8 жыл бұрын
great video just subscribe to you I'm #212 Tom (F4collector)
@Mycustomhotwheels
8 жыл бұрын
Hey thanks Tom! Good to see you here my friend
@ruincam
6 жыл бұрын
How is the drill supposed to drill through that??????? Didn’t work for me
@박종진-n8d
7 жыл бұрын
bmw m3?
@miguelsanchez404
Жыл бұрын
Good video, but the way you cut your thumbnails makes mine hurt for yours
@lashgoshotwheels1127
6 жыл бұрын
Can u send me some real ride wheels plz
@erexotoribash7206
8 жыл бұрын
why the bmw
@Mycustomhotwheels
8 жыл бұрын
it just happened to be the car I was wheel swapping when the urge to video it came along I guess ;)
@felicitasdelgado5908
8 жыл бұрын
#323 my bad
@bahn2452
7 жыл бұрын
Don't forget safety glasses. If any of those bits get in your eye you'll be really sorry.
@pali_aha2781
3 жыл бұрын
Gosh, will you stop CHEWING your thumb nails? It's giving me the creeps.
@Mycustomhotwheels
3 жыл бұрын
Wish I could bro
@xTheNameisEthan
7 жыл бұрын
Where do you get tools and paint from
@Mycustomhotwheels
7 жыл бұрын
hey Ethan, you will find all the answers to your questions in this one massive article I compiled: mycustomhotwheels.com/beginners-bible/
Пікірлер: 103