God bless you!! Straight to the point, clear instructions & you actually demonstrated the video topic instead of just talking about it!! Thank you so very much!
@Sewmuchquilting
13 жыл бұрын
finally a video that shows how it rolls through! I have seen so many that only explained what it does, but never showed anything. Thank you.
@chrisbutler9158
4 жыл бұрын
I agree, I've seen many of the Accuquilt videos but none that showed in depth how to actually use the cutter and placement of the fabric.
@shirleykennard3571
Жыл бұрын
Is it better to place fabric longways or bias way down on cutter
@lucirandall4051
3 жыл бұрын
I rcvd the Accuquilt Go! as a gift. Today I cut my first jelly roll strips with it. I'm so excited! I had a little more waste (due to not being able to add 2-1/2 x 3 successfully in my head-lol!); however, way better at cutting the strips than I ever would've been with my mat and rotary cutter, etc. And, better than jelly rolls purchased in the store as most of them have that pinked edge that's confusing, AND, yardage is so much cheaper than pre-cuts. Thank you for the video on giving me confidence to make the first go!
@spye007
9 ай бұрын
THANK YOU! I was wondering how on earth to cut long strips.
@lori32556
11 жыл бұрын
Hi Chris, I was having the same problem as you. I wanted to see how the fabric was rolled through. I finally found it, lol. I was looking to see all the comments and when I saw yours, I said finally, someone knows what I am talking about. Happy Quilting, Lori
@kimworkman2425
5 жыл бұрын
Wow! What other shapes can you cut on it?
@conniebrown2054
10 жыл бұрын
A + for simple tutorial....would be nice to note that with the GO, it doesn't cause the 'v' in the center that sometimes happens with rulers
@LottieSue
12 жыл бұрын
How long does that long die for 2.5 inch strips last? How often do the dies have to be replaced.
@sonnyle1523
5 жыл бұрын
I need a cutting machine that can cut 4 inch fabric circles. The material is heavy duty PVC fabric, same material that makes inflatable bouncies. Can anyone suggest such a machine.
@pamelakitchens5549
7 жыл бұрын
What are the yardage you used??
@chrisbutler9158
4 жыл бұрын
Oh, so that's where I've been going wrong? I kept putting the fabric over the end guidelines. Now I have my Go, I'll have better cuts, thanks!!
@o0oMysticdragono0o
11 жыл бұрын
when I cut with a cutter I have to be very picky about folding the fabric or I will get a V in it where it was folded. She wasn't very picky and kept moving the strip when she took it out...is it easy to get that V if the fabric isn't folded right?
@DLR310
11 жыл бұрын
WHY DOESN'T ANYONE ANSWER ABOUT THE LIFE OF THE DIES = I UNDERSTAND THE MORE THEY ARE USED PROBABLY THE SHORTER LIFE SPAN = BUT = WHAT IS THE AVERAGE LIFE OF THE CUTTERS ~ TY
@annethompson4886
Жыл бұрын
This is a new one my dies are not that wide!
@accuquilt
Жыл бұрын
Hi Anne, we have 18 different sizes of strip dies; some come on a 6 x 24 die board, while others cut on a 10 x 24 die board!
@nancypark4979
8 жыл бұрын
I have the 3" cutter which is suppose to make a 2 1/2 in strip but I keep getting a 3" cut. What am I doing wrong?
@chldbl07
8 жыл бұрын
+Nancy Park The 3" cutter cuts the strip to be 3" and after you sew your strip (1/4" seam allowance on each side) your strips will be 2 1/2" wide.
@lindafriend9392
8 жыл бұрын
A 3 inch strip is 2 1/2 inch finished - it includes the quarter inch seam down each side. A 2/12 inch ( like a jelly roll) strip is 2 inches finished. I get really confused with the names of the dies😕
@kookykaren1
14 жыл бұрын
The sound is so bad I can hardley hear you. Is is possible to record it again? Thanks!
@bevemerson2438
6 жыл бұрын
Poor volume
@bettyjosusin7944
7 жыл бұрын
something wrong with volume...not my machine as everyone else is fine volume wise
@carolynlaug
11 жыл бұрын
You need to be careful how you put in the fabric...love Accuquilt but you should show them how to put in the fabric so they do not got the u or v in the middle of the strip.
@Chicadita
6 жыл бұрын
Carolyn Lauginiger Yes, please! I’m getting the strange joint at the fan fold.
@jamknitting
3 жыл бұрын
Can you speak in to the mike. No help for the hearing impaired👎🏻
@accuquilt
3 жыл бұрын
Jeanne, this is one of our original videos, you can find a newer video where we have better technology here kzitem.info/news/bejne/lYaZy4WcgpGUhqg
Пікірлер: 27