I realize this video was made five years ago, but damn you explain this better than any other video I have seen. I have had so many problems ending my baseboard. I understand the concept, but I cannot get that last piece right you were the first person to show how it is actually done on that little return piece, when you move the saw to zero for that last cut. thank you so so much my husband will be happy. I can get my molding finished now. He’s sick of looking at it.
@joannalayne8688
2 жыл бұрын
I'm smiling and clapping my hands...didn't even know the term was "return"...I'm a first time floor molding installer.....thank you!!
@t0chen06
Күн бұрын
Thank you! Best explaination ever!
@Stylist4less
2 жыл бұрын
FINALLY a simple straight forward easy to follow method that actually works!!! Thank you!
@jameshoffmann6881
4 жыл бұрын
i am so glad i found your channel. my miter saw skills increased greatly by watching your easy methods & explanations. thank you very much.
@dougthomasmusic
8 ай бұрын
I totally agree with J. He worded it perfectly for me as well. Thank you and thank you. 😀
@alexcortes8054
3 жыл бұрын
Thanks for the easy and straight forward tutorial!! Much appreciated without having to watch a 15 video. Great work!
@toddharvell7937
Жыл бұрын
Thanks man. You made it simple. I watched another video that did nothing but confuse me.
@yakittyyeah7649
4 жыл бұрын
Wow, what a great job teaching this technique. Finally, a molding video that isn't complicated,and shows each step up close. Thank You
@ordenna768
5 жыл бұрын
What I needed to know in under 4mins. Excellent!
@CherylJosie
2 жыл бұрын
Short, sweet, and to the point. Much appreciated.
@ehudsonification3811
3 жыл бұрын
Thanks for the vid! Showed what you needed to with no bs or filler. Great job 👍. Thanks from Ottawa, Canada.
@Robert-jo8ij
Жыл бұрын
Thanks, simple, clean and it works.
@joeferrucci
5 жыл бұрын
that second return just blew my mind 🤯 thankyou!🙏🏼 California
@themeat5053
5 жыл бұрын
Thanks for always keeping it simple. I like your down-to-earth approach. I watch alot of you tube carpenters who just make things too hard. Keep up the good work .
@SawdustandWood
5 жыл бұрын
The Meat thanks for watching and the kind words!
@kimoigarta5642
5 жыл бұрын
Great video. Your patience and explanation of your step by step process is very appreciative. Thank you!
@SawdustandWood
5 жыл бұрын
Thanks!
@serafinarecalcitrant3869
5 жыл бұрын
This was the best explanation I have seen. I'm storing this video in favorites.
@vanna13v
Жыл бұрын
Best video ever! Thank you!!
@MKx5288
5 жыл бұрын
Your vid is one of the best I’ve seen. It’s easy to understand the 1st time watching it compared to others that takes a few viewings. Very nicely done.
@tpatschorke
Жыл бұрын
Short and sweet! Thanks
@stephenjowell7733
3 жыл бұрын
Speed just right. Explained clearly. Great video. Thanks
@somedaymaybe9112
5 жыл бұрын
"S" and "W", you The Man!!! To copy Orden na, "just what I needed to know and understand" but in only under 1 mike, 51 seconds because I am going to use the first example of a return since that is what I prefer. The second example was just as clear and easy to understand as well, and perhaps I shall use the second example "Someday Maybe..." Thank you very much!
@r.shelton7793
3 жыл бұрын
Thanks.love the info and and technique...I used to do a bit of trim work and use to just cut the ends at 50 to 55 degrees to give the end a little detail.dudnt look too bad .but this looks waaay better.Thanks again.Can't wait to practice and perfect the return technique.
@troy5150
4 жыл бұрын
Finally! Someone who explains it straightforward and simple. Good grief there are so many vids out there that make this look way too complicated. Thank you 🙏
@josechavez5950
5 жыл бұрын
Thanks for the video, simple to the point and easy to follow! Cheers from Chicago!
@SawdustandWood
5 жыл бұрын
Jose Chavez you’re welcome
@JavyJav01
3 жыл бұрын
Pure clean cuts ! You did your thing 👍🏽💯
@hersonlamolli6162
Жыл бұрын
Thank you so much! I really appreciate sharing your skills and knowledge!
@gabriellequinn5811
2 жыл бұрын
Great video! Straight to the point, getting it done 🦾 thanks!
@ryannastaj
2 жыл бұрын
Exactly what I needed to learn today!! Saved my day brother!!
@dougruwe288
3 жыл бұрын
Fast and to the point. Thank you!
@johncontos9577
Жыл бұрын
Excellent sir! Been trying all morning to figure this out! Cheers 😊
@MUFFDIVER4U
3 ай бұрын
You are the man. Thank you very much.
@jasonk1746
3 жыл бұрын
Watched a few videos before yours. I liked your explanation and video the best. Thanks!
@SawdustandWood
3 жыл бұрын
You're welcome!
@mjk8292
3 жыл бұрын
Very good teacher. Thanks for sharing
@rockinvida1960
2 жыл бұрын
Excellent video...very helpful. Thanks!
@objective_evaluation
2 жыл бұрын
Perfect explanation and walk through, Thank you!
@michaelmcalpin6144
5 жыл бұрын
Thank you for a very clear explanation. I just wasted half an hour trying to figure out a handyman exclamation for a miter return. They made way too many assumptions in their instructions. It was great
@SawdustandWood
5 жыл бұрын
Michael McAlpin thanks for watching!
@gabriellozano6347
6 ай бұрын
Thanks 🙏 for helping us out brother you were very clear on explaining it
@SawdustandWood
6 ай бұрын
You're Welcome
@chefh3556
4 жыл бұрын
You don't move too FAST you move too PERFECTLY!! Great vid🤓🤓
@aavocadoToast
Жыл бұрын
Exactly what i was looking for. U rock man
@joemomma7661
5 жыл бұрын
This helped me out today. Thank you much.
@aliciamackey8213
3 жыл бұрын
This was very helpful
@keithmarlowe5569
Жыл бұрын
That was perfect explanation. I didn't know there was two ways. I only knew about the 2nd way you did it, but didn't know how to do it.
@RobertCornell464
3 жыл бұрын
Thank you so much I used your video to do some returns on some simple but expensive chestnut backsplash trim in my kitchen and saved me from the dreaded butt ends showing.. Now have a new skill, thanks again. Subscribed
@SawdustandWood
3 жыл бұрын
Your welcome! Thanks for the sub
@lisakukla459
2 жыл бұрын
Brilliant. So simple!
@yairacherman
Жыл бұрын
Excellent! Very well explainded. Just what i needed.
@laurelglenn
3 жыл бұрын
Thank you. Another good lesson
@AnthonyBalletta
4 жыл бұрын
Awesome! Quick and simple, thanks!
@bxp1696
3 жыл бұрын
Love your channel. I learn so much.
@SawdustandWood
3 жыл бұрын
Thanks!
@braddeem4998
Жыл бұрын
It took me quite a few tries. But I finally got it thanks for the help
@hjong8830
2 жыл бұрын
This is exactly what i needed. Thank you!
@rvd4lyfe
Жыл бұрын
This is exactly what I was looking for. Thanks!
@colomacountry
Жыл бұрын
I love the last part.."it would fit tighter on the wall..." NOT as he pushes it together. That cracked me up, thanks for the video however, it took me 20 cuts to figure this out a year ago, and then I forgot what I had done. I like the end return a lot instead of running it directly into say a cabinet.
@dundundata7603
2 ай бұрын
might need a little sanding first
@cousincarl288
6 ай бұрын
Thanks for the education. Needed that
@SawdustandWood
5 жыл бұрын
Thanks for watching!
@bananasnblow5434
4 жыл бұрын
Excellent video. Thank you.
@cdb989
2 жыл бұрын
Love the first one. That’s the one I would use. Great video
@kodiham7532
3 жыл бұрын
Nice! Quick and to the point!
@pattywaters4269
2 жыл бұрын
Thank you. Great tutorial 👍🏻😎
@stevelee5291
5 жыл бұрын
keep doin what youre doin, the way youre doin it! thanks a million! tucson
@SawdustandWood
5 жыл бұрын
Thanks and you're welcome!
@good5113
5 жыл бұрын
Perfect video. Using option 2 today. Thanks!
@SawdustandWood
5 жыл бұрын
Awesome let me know how it came out!
@mariusmartinsen2064
5 жыл бұрын
Thanks for your time, showing us tips and tricks
@SawdustandWood
5 жыл бұрын
You're welcome!
@MrKelly-ll1lx
Жыл бұрын
Man you made understanding this super easy!👌🏾
@danielpadilla6422
4 жыл бұрын
thanks so much now everyone thinks I know what I am doing!! I am definitely telling others about your channel and your skills!!!
@SawdustandWood
4 жыл бұрын
Thanks my friend! Please share it
@sasstewart1222
9 ай бұрын
Nice, thanks for posting
@jesusmendoza316
Жыл бұрын
Thank you, your video is so good and helpful
@vanillagoose4444
Жыл бұрын
Thanks for this i actually forgot how to do this 🙄 Cost of living brought me out of retirement, God bless you 🙏🏻
@lc1496
3 жыл бұрын
Great channel my skill has improved a lot.
@SawdustandWood
3 жыл бұрын
Thats awesome, thanks!
@zozojay4110
2 жыл бұрын
You make it very easy and simple thank you 😊
@mikesworld.
5 жыл бұрын
Great job buddy. Keep up the great work!
@misterm7086
5 жыл бұрын
Another top shelf video. I learned lots. Be well! -Nick
@SawdustandWood
5 жыл бұрын
Thanks for watching!
@imthemarsha7711
Жыл бұрын
Super helpful, thank you!
@Cornholeus
4 жыл бұрын
Great explanation. Thank you.
@pinballwizard8926
2 жыл бұрын
Thanks - I knew there would be a simple way to do this without measuring!
@mannymartinez1426
4 жыл бұрын
Very helpful video amigo thanks
@georgemartinez892
Жыл бұрын
Great cuts💪 thanks
@tracynshea1333
5 жыл бұрын
You never cease to amaze me with everything you help with! You’ve helped me over a dozen times! Who Dat?
@Tako2e
5 жыл бұрын
GREAT INSTRUCTIONAL VIDEO MY FRIEND... I KEEP THIS ONE PLUS OTHERS IN MY SAVED VIDEOS TO KEEP WATCHING IT... ALOHA🤙🏽🤙🏽🤙🏽
@SawdustandWood
5 жыл бұрын
Thanks
@RonnieRokkenrohl
5 жыл бұрын
Hey there! I like your videos... my only complaint is that I watched them AFTER I did some trim work - now I have to peel them back and use this great method for returns! Haha, thank you for posting your knowledge, sir.
@SawdustandWood
5 жыл бұрын
You're welcome! Thanks for watching!
@dukebarnes64
3 жыл бұрын
Thanks!! Helpful video.
@vtbakerbuilder
3 жыл бұрын
Very helpful, thank you.
@TimusPrime
4 жыл бұрын
Thanks for this video! You prob saved at least one of my fingers!
@janizz976
4 жыл бұрын
Thanks!!!! Perfect speed. I kept trying to get my brain to just think and I kept messing it up.
@corinacamacho5172
5 жыл бұрын
Thank you for teaching us
@cliveburnett6796
Жыл бұрын
thanks you for the idea how to cut return on baseboard
@Bigcee248
5 жыл бұрын
Good stuff. Keep them coming!
@SawdustandWood
5 жыл бұрын
Thanks!
@VictorSilva-hf2hr
4 жыл бұрын
Thanks for your video will do that on my next project.. Keep going
@teamkansloos7678
4 жыл бұрын
Nice video, thanks!
@robertblunt1314
4 жыл бұрын
Great video!
@nadinecius8747
5 жыл бұрын
This is awesome. I am learning a lot from you. Please do more videos.
Пікірлер: 188