You are a freakin life saver! I was about to smash several pieces to bits out of rage and your quick clear tips just saved me a lot of cleaning. I saved this video and will watch it a few more times before attempting to cut again!
@joanpepping7764
2 жыл бұрын
Thank you for this video. I learned some new techniques. I will try to draw the cutter towards me now to see if I can get a better cut. I also like the reminder to apply pressure from the shoulder. I never knew about the set screw on the running pliers.
@larryfarr
3 жыл бұрын
Wow. Very in-depth tutorial of glass cutting and glass cutting tools. Thank you very much! So well done!
@CalorieRebel
10 жыл бұрын
Great video! Love all the close ups and the presenter was very clear and concise. I wish all how-to videos were this good.
@smokinone951
10 жыл бұрын
thank you this is the best tutorial i have been able to find, clear description and examples. i was kinda scared bout attempting this but have much more confidence now
@conniehudak2894
2 жыл бұрын
Thank you I am just learning the art of stained glass cutting I have my materials but have not cut a piece of glass yet because I don't know how so this is very helpful to me but the love is there thank you
@anonymousmie2829
9 жыл бұрын
Wow! Two thumbs up for you. This was a very well done presentation. You are one of the finest presenters I have seen regardless of venue. The amount of information, overall video length, quality of information, videography, and presentation combine to make a very enjoyable video. Keep up the good work. I take that back.. Keep up the great work. A star is born!
@DelphiGlass
9 жыл бұрын
Anon Ymousmie Thank you so much for the feedback. I'm glad you found it enjoyable and informative.
@typhannieiglesias9859
9 жыл бұрын
Delphi Glass Creativity Center i agree 100% with the before said commenter.
@nomanmcshmoo8640
9 жыл бұрын
EXCELLENT presentation!!!! Well done!
@MilwaukeeMax
9 жыл бұрын
Thank you for the very helpful and thorough instructions!
@patleo123
9 жыл бұрын
Excellent presentation. Appreciate the instructions.
@chriss4727
9 жыл бұрын
Very informative tutorial, thank you for uploading, this has helped me understand which tools I need and the various methods I can use, and a very beautiful presenter I might add.
@VikkiiBabessx
7 жыл бұрын
Very useful for a newbie like myself, I hope to start making masterpieces soon!
@pamelavroman1820
8 жыл бұрын
A very finely done video...I am inspired !
@safebeauty9162
5 жыл бұрын
Very well done, exactly the information I was looking for!
@sarahmason4804
9 жыл бұрын
Thank you! Very helpful for a newbie!
@AnujChamara
10 жыл бұрын
Excellent explanation.Thanks.
@vmsa100
7 жыл бұрын
You are the best! Conngratulations!
@amberwebber5385
2 жыл бұрын
so helpful! learned so much! thnx
@raydunakin
3 жыл бұрын
Thanks for this, it's very helpful!
@liankyson9161
3 жыл бұрын
i guess I am kinda randomly asking but do anyone know a good place to watch new series online?
@joeltrevor3257
3 жыл бұрын
@Lian Kyson Try Flixzone. Just search on google for it =)
@brodietaylor7467
3 жыл бұрын
@Lian Kyson Lately I have been using flixzone. Just google for it :)
@leonardterrance5987
3 жыл бұрын
@Lian Kyson lately I have been using Flixzone. Just search on google for it :)
@usaearthling
4 жыл бұрын
Great tutorial. Thanks for sharing.
@elizabethlogsdon7078
9 жыл бұрын
Thank you for this video! So informative and well made!! I have subscribed!
@DelphiGlass
9 жыл бұрын
Elizabeth Logsdon Thank you for the wonderful feedback. Good luck with all your projects.
@norabishay2888
9 жыл бұрын
It was very useful.Thank you
@Windragon76
6 жыл бұрын
So much new and useful information. Thank you for making this video.
@flyurway
9 жыл бұрын
Damn, that was informative. Even a jack-of-all-trades, know-it-all like me learned a good deal here. Nice job...you look like you've done this before! :)
@DelphiGlass
9 жыл бұрын
Thank you for the great feedback. That makes my day knowing that I've helped someone.
@MichellesHandmadeCreations
10 жыл бұрын
Really well done tutorial! I can't tell you how much glass I've wasn't doing it wrong - too much pressure, etc. One question: Is that black mat pretty firm, or could I use an old mouse pad I have laying around.
@gothmorph
8 жыл бұрын
very informative ,i am trying my hand at dioramas and i would like to encase them in small glass cabinets . great video , going to subscribe..
@joesno406
5 жыл бұрын
Amazing teacher!!!
@lanzeharo8488
3 жыл бұрын
Thank you
@muhammadimranelahi9814
4 жыл бұрын
Zbardast, wonderful, A1+ 👍
@JordanTaylor-mc3jt
Жыл бұрын
Great video, thank you. It seemed odd though when the presenter talked about safety and then proceeded to cut and sweep up glass without gloves.
@alishadb
8 жыл бұрын
great tutorial... really useful. Thanks !
@DelphiGlass
8 жыл бұрын
+alishadb Thank you for the feedback. I'm glad you found it useful!
@jaimejimenezv4069
9 жыл бұрын
Nice. I learned a lot.
@DelphiGlass
10 жыл бұрын
The black breaking mat is a fairly firm surface that allows just a little bit of “give”. An old mouse pad is likely to be too soft to offer safe, firm support. Breaking mats are available at Delphi (www.delphiglass.com/glass-cutters-tools/glass-cutters/glass-scoring-and-breaking-mat) and can be used over your regular workbench surface. Some glass artists employ the technique of applying pressure to the reverse of the score with their fingertips over other firm surfaces such as a homasote board or grid work surface, and find that this works reasonably well also.
@shyzhx
9 жыл бұрын
Very nice work.
@barsfrommars8969
7 ай бұрын
Can someone tell me what happens if the traditional running pliers don’t come with a middle line? Should I ask for new ones? I’m not new to this kind of crafting, but I’ve received a set that doesn’t and I’ve never used one without before.
@amerusan3341
Жыл бұрын
please running plastic pliers does it work on mirror?? THANKS
@nickbotin4952
4 жыл бұрын
thanks for info
@smokinone951
10 жыл бұрын
question, i need to bevel the edges or round them off so they are not sharp, this is because its going to be applied to a fretboard and im going to be running my hand up an down the length rapidly, and again i dont want to slice my fingers off. how would you recommend i accomplish this?
@mailemoore5017
9 жыл бұрын
Hi Delphi Glass: Thanks for the very precise and useful video! What is the thickness of that glass you were cutting? Thanks
@DelphiGlass
9 жыл бұрын
Maila M The glass I used in the video is average for stained glass (approximately 1/8” or 3mm thick). The tools we show in the video can generally be used on glass up to ¼” thick without issue. Most glass that is more than ¼” thick is usually used in furniture/shelving production, and often is cut to size then tempered - which means it cannot be cut smaller (it will shatter if you try).
@riptorn8527
8 жыл бұрын
...well done...thanks
@morso2009
3 жыл бұрын
Hi please can let me know where to buy this set of plaiers
@realtalkrealtalkrealtalk
3 жыл бұрын
what home remedy is there for the use of running pliers.
@ssentongojackson1051
5 жыл бұрын
where do i get these pliers from coz in my country i do not expect them
@luct3731
3 жыл бұрын
What mat is it you cut the glass on?
@rajmehta9997
9 жыл бұрын
Can I cut think coffee table glass by this method?
@DelphiGlass
9 жыл бұрын
Raj Mehta The tools we show in the video can generally be used on glass up to ¼” thick without issue. Cutting glass ticker than ¼” with these tools is not recommended.
@vid21jgg
8 жыл бұрын
Have you ever or have had any thoughts on cutting wine bottles for hurricane candle lanterns?
@jamessonke4411
7 жыл бұрын
Score the wine bottle as straight as possible and use a thin pencil torch to heat up the score line. heat along the line a minimum of three times around. taking about 30-45 second per rotation. it may take practice, but using this method I am able to get a clean break on wine or liquor bottles 9 out of 10 times in under five minutes each. steady hand is key. feel free to ask me any questions. I've literally spent DAYS maybe Weeks trying to perfect this method. Sorry for the long message lol, also, the thinner the torch flame the better.
@jenniferries744
8 жыл бұрын
Hello! I notice the table, are those ceiling tiles on top of the table? Or what kind of material is that?
@DelphiGlass
8 жыл бұрын
+Jennifer Ries The tiles you see in the video are actually Homasote boards which you can buy from us. They are available in three different sizes: 12” x 12” squares www.delphiglass.com/soldering-supplies/supplies-accessories/12-x-12-homasote-board 24” x 24” squares www.delphiglass.com/soldering-supplies/supplies-accessories/24-x-24-x-1-2-homasote-board 16” x 24” www.delphiglass.com/soldering-supplies/supplies-accessories/16-x-24-homasote-board
@cheseenlo
9 жыл бұрын
i have a question would be glass where you scored have a very sharp edge ? if so how do you remedy that ?
@erenjaeger3386
8 жыл бұрын
you sand it with sandpaper
@marvellu3477
10 жыл бұрын
you need a pair of glove in case get hurt by the glass edge. take care
@krisolivas1194
3 жыл бұрын
Demo diamond cutter pls
@FreshBeastieKid
7 жыл бұрын
Can this also be done precisely with plexiglass?
@gailkfrommaryland7598
7 жыл бұрын
I am fairly certain the answer is NO. You can cut plexiglass with a jig saw or a circular saw, but not with a glass cutter.
@jamessonke4411
7 жыл бұрын
no
@MrAutospec
9 жыл бұрын
Лучше бы про производителей стеклорезов рассказала,какие брать нужно.
@NathanThePrezPretlow
9 жыл бұрын
.Can this Running Pliers break 1\4 glass ?
@DelphiGlass
9 жыл бұрын
Nathan Pretlow With a good score it could work but it's not specifically designed for that. We recommend the Tap Wheel Supercutter to get a good score on thicker glass and the Power Breaker to run the score. You can get the Power Breaker & Tap Wheel Supercutter in a set - www.delphiglass.com/fusing-supplies/fusing-tools/power-breaker-and-tap-wheel-supercutter.
@NathanThePrezPretlow
9 жыл бұрын
Delphi Glass Creativity Center Thanks for the info.
@stephenreamer4323
9 жыл бұрын
Overall, this was a good video but it falls far short as far as I am concerned. No discussion was made of pressure, wheel material, or wheel angle. I have cut thousands of miles of glass from single strength to 1 inch thick and only need running pliers when the thickness is 3/8" or greater. Most of the time, grasping the glass between thumb and forefingers of both hands on either side of the score and simply bending the glass will break out the glass cleanly. I suggest always use a carbide wheel and make sure you use the correct angle of wheel. In my humble opinion the best glass cutters are made by MacInnes Tool Corp., Hudson Ave., Rochester, NY.
@greg6107
5 жыл бұрын
SR give yourself a pat on the back, please send link to your video.
@Strikeshotz
5 жыл бұрын
Look like you just woke up 🤤
@donnapagerie5295
7 жыл бұрын
Please show us what it means by cut one up, cut one down...
@rondenhollander4313
7 жыл бұрын
Oil best or for s no oil. I took a class and they did not use oil. Another place we buy glass they store the cutter in oil.
@jamessonke4411
7 жыл бұрын
it cuts best if you use constant pressure and constant speed. oil makes this easier but is not necessary.
@indrapurnama5734
7 жыл бұрын
cute..
@SaucyTreasures
2 жыл бұрын
A lighter background would have been easier to see the scoring and the detailed examples.
@BeninChurchil
9 жыл бұрын
I think they forgot to use gloves for safety from cutting your hand
@vickiekelley5253
4 жыл бұрын
I don't wear gloves. They are just too bulky.
@Bossim-et8pg
8 жыл бұрын
pleaseusing glove for safety
@billyandrew
3 жыл бұрын
Camera work needs addressing...it's too far away from both cutters and glass.
@yxhankun
Жыл бұрын
impracticable because your glass is too small to demonstrate any real scenario.
Пікірлер: 87