That spade bit on my drill is the perfect way to go thanks man 🤣
@paulp1a
9 ай бұрын
Using a spade bit is so easy. Why did I never think of this! I just drill a bunch of holes in a line then bash it with a hammer! Thanksssss!!! 😂
@johnmacpherson4758
Жыл бұрын
I've been trying to cut this laminate floor all morning with my drill! Should I just make all of these holes closer and then pound the unwanted part off with a hammer or should I use screws or maybe a larger diameter bit? I'm almost at the point of returning this to the store and opting for a jigsaw.
@fixingexpertofficial
Жыл бұрын
It seems like you're facing difficulties using a drill to cut the laminate floor, and I can understand your frustration. Cutting laminate flooring with a drill is not the most efficient method, and it's not designed for this purpose. Instead, I'd recommend using the right tools for the job, like a jigsaw or a circular saw with a fine-toothed blade designed for laminate flooring. Here's what you can do to make the process smoother: Get the right tools: As mentioned earlier, a jigsaw or a circular saw with a fine-toothed blade is better suited for cutting laminate flooring. These tools will provide cleaner and more precise cuts. Measure and mark: Use a straightedge or a square to mark the line where you need to make the cut on the laminate flooring. Double-check your measurements to ensure accuracy. Jigsaw or circular saw: If you have a jigsaw or circular saw, use it to cut along the marked line. Be sure to use the appropriate blade for laminate flooring to prevent chipping or splintering. Cut in stages: For more precise cuts, you can cut the laminate flooring in stages. First, make a shallow cut along the marked line, and then gradually increase the depth with each pass until you cut through the entire plank. Protect the laminate: To minimize chipping or splintering on the top surface of the laminate, you can also place a piece of painter's tape along the cut line before using the jigsaw or circular saw. Safety first: Always wear appropriate safety gear, including safety glasses and ear protection, when using power tools. Using the correct tools and techniques should make the process much easier and yield better results. If you don't have a jigsaw or circular saw, you can consider renting one from a local hardware store or asking a friend or neighbor if they have one you can borrow. Remember to always follow the manufacturer's instructions for the tools and exercise caution while working with power tools.
@johnmacpherson85
Жыл бұрын
@@fixingexpertofficial Have you watched your own video? Start at 2:57 and tell us all what's wrong.
@K2teknik.
Жыл бұрын
@@johnmacpherson85 Translation with Google do sometimes goes a bit wrong, now and then it goes totally off the mark.
@phelpst
9 ай бұрын
You need to turn the laminate on its side and drill down through it!
Пікірлер: 16