❤ help the channel get better! 🚀 share this video with your friends ❓ ask your questions
@sat9m
27 күн бұрын
Beyond Bike mechanics and maintenance this is professional quality video and sound effects.
@GoodBicycle
27 күн бұрын
Thank you for your feedback! 😘
@tuber7853
5 ай бұрын
this is a DAMN detailed video on dismantling of bb bearing for servicing...every of the video angle are well documented and his servicing skillset is marvelous👍
@GoodBicycle
5 ай бұрын
Thank you for your comment! 😍 if you liked this video, share this video with your friends ❤️ it will help the development of the channel! 📈
@paulgrimshaw8334
4 ай бұрын
It is very well photographed but some of the methods shown in refurbishment are incorrect.
@kenzulumovski892
5 ай бұрын
I desperately want this gentleman to perform this on my bike. How satisfying to watch!!
@GoodBicycle
5 ай бұрын
Thank you for your comment! 😍
@UtubedatShit
7 күн бұрын
I'm a little confused. You didn't install your own bottom bracket?
@-Steve-01
7 ай бұрын
Great to see something being restored rather than thrown away and replaced (as seems the norm in this era before we’re finally forced to look after our planet). Would have loved to see/hear the cranks spinning on the bike before/after.
@GoodBicycle
7 ай бұрын
Thank you for your comment. Sadly, not the entire repair process was captured in the video😿
@krissk77
7 ай бұрын
I only throw away broken ones... if it can be salvaged. Will do that first but will hv a new one on the ready. The old one can be used on another old bike that u can give away in working condition.🎉
@leoszilard3998
6 ай бұрын
Hexagonal Boron Nitride powder with Molybdenum Disulfide grease.
@furivno
8 ай бұрын
Remember, if the bearings are not glowing red after the ride then you are not outputting enough power and you need to train more
@GoodBicycle
8 ай бұрын
😍😍😍 👍
@ndrewx
2 ай бұрын
Geez Man! You're an artist! Your videos are amazing! And it's a very good approach to sustainability, not to immediately buy new and throw away the old, but to save, renovate and repair what we can. Of course I share.🤘
@GoodBicycle
2 ай бұрын
Thank you for your comment! Share my videos with your friends, it will help the development of the channel! 😘
@cosmefulanito5933
7 ай бұрын
Maintenance is excellently explained. Unfortunately, those bearings have a lot of play and they have to be changed.
@GoodBicycle
7 ай бұрын
thank you for your comment! 😘
@ryancraig2795
8 ай бұрын
Servicing sealed bearings that have corrosion like that in them seems a bit pointless to me. I would have sourced new bearings. Fully sealed ones.
@GoodBicycle
7 ай бұрын
you don't always have a new part on hand to replace it.
@roddas26
7 ай бұрын
And pitted bearings and races feel bad even after all this hard work.
@tonyjuliano1
7 ай бұрын
This…
@paulgrimshaw8334
4 ай бұрын
Agree. Reinstalling a bearing that has been pressed out isn’t a good idea. Also, a full contact sealed bearing is suitable for this application because the old bearing operated in dirty and wet conditions. While on the subject of bad ideas… Never, ever, spin a dry bearing. Especially with compressed air because the rotational speeds can be very high. Zero lubrication means metal-on-metal contact. When un lubricated, cages can score bearings and races. Most bearing manufacturers specify a 1/3 fill of grease. Anything more than that will add drag and squeeze out past the seals during use… and attract dirt.
@eric-janh.ted.8880
4 ай бұрын
And probably a new bearing of a higher quality. Standard they're mostly of a mediocre quality. Bearings that are in a shape like this one, most of the time are having to much slack after cleaning. And that is costing efficiency too. And then there are the bearings in the pedals too. Most of the time they can't be serviced at all.
@fredpomi851
7 ай бұрын
Impressive video production! One day maybe, when I am retired with a proper workshop. I have built a few home-made bearing presses and it is an absolute headache to find the right parts (let alone for the extraction process which always requires specific dedicated parts).
@GoodBicycle
7 ай бұрын
Thank you for your feedback. May your dreams come true😽
@ГеоргиСтоянов-ш4т
2 ай бұрын
Very nice video - just what I was looking for. It might be cheaper to buy a new BB than to pay for full servicing but it sure is fun to do it yourself and feel satisfied with your work on your own bike.
@GoodBicycle
2 ай бұрын
Thank you for your views and comments. It is indeed sometimes easier to replace the entire bottom bracket, but we have shown one of the repair options
@OjStudios
8 ай бұрын
Good to know as a hobby thing, in the shop all that labor is so expensive that you can get 5 new bottom brackets with that price.
@GoodBicycle
8 ай бұрын
it's for the soul.)
@iancho9587
7 ай бұрын
@@GoodBicycle Soul and skill, all those comments for cheaper to buy can't fix a broken chain without master link on their never flat carbon wheelsets... In fact, freshly packed BB is a must-to-do on a brand new rig, don't have to believe me just take it apart and find yourself Why? little recommendation at your procedure, at the very last step with the external protective coat try to spray some dry silicone instead of grease - it should last till next interval with the added benefit of no dust collecting. Cheers
@kersh4w
7 ай бұрын
You'd be surprised at inadequate level of grease in brand new bearings on suspension pivots and bottom brackets. I think it's good practice to always at least disassemble to check the grease for new bearings.
@richardggeorge
7 ай бұрын
@@kersh4wI pull apart every Shimano BB and add grease and adjust cones
@brunodecenzo8092
7 ай бұрын
ottimo lavoro. Apprezzo anche la scelta di non rovinare il video con inutile sottofondo musicale. Grande!
@GoodBicycle
7 ай бұрын
Thank you for your comment! 😍 if you liked this video, share this video with your friends ❤️ it will help the development of the channel! 📈
@xXjoehotXx
7 ай бұрын
great vid ! no bad music in bg and good pics !
@GoodBicycle
7 ай бұрын
Thank you for your comment! 😍 if you liked this video, share this video with your friends ❤️ it will help the development of the channel! 📈
@selimiye22
8 ай бұрын
👍👍👍👍👍mükemmel bir işçilik,çekimler süper ve herşeyi gösteriyor,sizin gibi işinde uzmanlaşmış,teknik insanlara bisikletimin bakımlarını yaptırmak isterdim,,,
@GoodBicycle
8 ай бұрын
Thank you for your comment! 😍 If you liked my videos ❤️, support the channel financially 💰🙏. Use the "Membership" / "Sponsor" function on KZitem ✊😘
@billyshakespeare17
5 ай бұрын
Very nice video. Also the greatest advertisement for BB30 bottom brackets (provided your frame is within tolerances, unfortunately many are not).
@GoodBicycle
5 ай бұрын
Thank you for your comment. For some reason, BB30 is not such a popular standard and it is not always easy to find cranks for it
@jerry2wheels618
8 ай бұрын
Very good show how to maintain crank shaft. 🛠️👍 But is cheaper to buy new.💰
@GoodBicycle
7 ай бұрын
What about romance?)
@GoodBicycle
7 ай бұрын
I agree with you!
@krissk77
7 ай бұрын
It just shows they can be repaired.
@jackiegammon2065
2 ай бұрын
I've always used brake cleaner on something like that, the cleaner will do a great job at cleaning and evaporates quite quickly.
@GoodBicycle
2 ай бұрын
Thank you for your advice. I really don't like the acetone smell of brake cleaner
@nashgawri4869
8 ай бұрын
The sounds that everything made in your video made me laugh, very well done👌👌🙏🙏
@GoodBicycle
7 ай бұрын
thank you! but what kind of links are we talking about?)
@krissk77
7 ай бұрын
Most u can get online...
@Cycle-Tourer
7 ай бұрын
Not necessary to release the bearing outside. Just remove one rubber. Put all the area in a fluid to clean. Shake it to release the dirt. Dry it and lubricate it. Easy! Alternative buy 2 new bearing for 3-4 dollars and change.
@GoodBicycle
7 ай бұрын
Thank you for your feedback! 😘
@michaelparreno5391
Ай бұрын
I love the BB puller tools😍
@GoodBicycle
Ай бұрын
thank you for your comment!
@macducati2304
8 ай бұрын
He knows what he's doing but......just go and buy a new bottom bracket they aren't that expensive, plus there will be wear on those bearings anyway.
@GoodBicycle
7 ай бұрын
thank you for your comment! 😘
@pedrocalixtooficial
7 ай бұрын
🇧🇷 Fazer manutenção na bike é muito importante para durabilidade dos componentes, like merecido tmj assistindo aqui em São Paulo Brasil
@GoodBicycle
7 ай бұрын
Obrigado pelo seu comentário! ❤️❤️❤️ Partilha este vídeo com os teus amigos, isso ajudará no desenvolvimento do canal! 📈😘
@pedrocalixtooficial
7 ай бұрын
@@GoodBicycle Ok 👍🏾 Vou compartilhar sim
@ZeevKovalsky
7 ай бұрын
I have a brilliant idea! Just change to new ones! 😀😀😀 Better faster and the proper way to do it!
@GoodBicycle
7 ай бұрын
thanks for the advice 😘
@s.j.5850
8 ай бұрын
Just add a small piece of pipe to that threaded rod & you won't have to wind the nut all the way down. Great video. You are very meticulous!
@GoodBicycle
8 ай бұрын
Thank you for your comment! ❤️❤️❤️ Share this video with your friends, it will help the development of the channel! 📈😘
@tefltoulouse
4 ай бұрын
Wow I didin't even know you could take these things apart! Nice trick at 3.15 using crankset! I haven't got any of the other tools to do the job though.
@GoodBicycle
4 ай бұрын
glad to be of service! thanks for your feedback 😘
@MarcelReinieren
7 ай бұрын
Bearings with rust do always have small damage, dents, and play. New ones are widely available. But if you have an old bike, you could do this. I would not recommend.
@GoodBicycle
7 ай бұрын
Thank you for your feedback! 😘
@julianrogers63
7 ай бұрын
To all the people who say just replace bearings i live in NZ cant get bearings alone have to replace whole crank set $1200 i think ill clean mine out !
@GoodBicycle
7 ай бұрын
Thank you for your comment! ❤️❤️❤️
@haughie61
7 ай бұрын
Find a good bike shop
@CharlieMetcalf
6 ай бұрын
Good video on how to repair the new BB's. Thanks!
@GoodBicycle
6 ай бұрын
glad to be of service! thanks for your feedback 😘
@yellowveedub
7 ай бұрын
My new BMX race bike uses this type of bottom bracket. Bearings got swapped out immediately for ceramic units 😁
@GoodBicycle
7 ай бұрын
😸👍
@bobwilliamson5574
8 ай бұрын
I tap the bearings out with a screwdriver, i don't have that special tool. Nice video.
@GoodBicycle
8 ай бұрын
Thank you for your comment! ❤️❤️❤️ Share this video with your friends, it will help the development of the channel! 📈😘
@wagwanyute
8 ай бұрын
im pretty sure you are destroying bearing life by tapping it out like that
@bobwilliamson5574
8 ай бұрын
@@wagwanyute I replace with new bearings and press them back into the housing.
@ludekdo3817
5 ай бұрын
If the bearing is pressed out only by the inner ring, it is destroyed. Then it makes no sense to clean and lubricate it, it is better to put a new one. As you can see in the video, the new one is pressed behind the outer ring and that's right.
@GoodBicycle
5 ай бұрын
Thank you for the clarification 👍
@abderrahmanegouasmi7556
20 күн бұрын
very good job! je souscris!
@GoodBicycle
18 күн бұрын
glad to be of service! thanks for your feedback 😘
@peterwillson1355
5 ай бұрын
This is why I prefer square taper spindles with serviceable cups. They spin a LOT better.
@GoodBicycle
5 ай бұрын
Thank you for your feedback! 😘
@Mr.Leeroy
21 күн бұрын
how are they serviceable? Can you name suck models?
@TheTriangle444
7 ай бұрын
the internal working of the bb looked well greased anyway, didnt need that much dissection
@GoodBicycle
7 ай бұрын
Thank you for your feedback! 😘
@SauronsEye
5 ай бұрын
9:30 Greasing your bearings. An effective but messier method to ensure you get grease to all parts of your bearing is to put some grease on the edge of your non dominant palm. About the mid point between your small finger and the heel of your hand opposite your thumb. Then using your dominant hand, lay the ball bearing part of the bearing on the grease and then press down and drag the bearing towards you, using both the pressing down and dragging of the bearing, while also pressing back with the edge of your non dominant palm, to press the grease into the bearing. Then rotate the bearing slightly and repeat till you've done the whole bearing and you can see grease coming out of all parts of the bearing on the side facing you. Repeat for the other side of the bearing and you should have grease applied to all parts of the bearing that need grease. Replenish the grease as required during all stages of the above process.
@GoodBicycle
5 ай бұрын
Interesting technique, thanks for the advice.
@madmax2069
3 ай бұрын
Yes, the old bearing grease packing method.
@Darchful
4 ай бұрын
Retirando de esa forma el sello, aplicas demasiada fuerza, retiralo con una pequeña aguja o pinza de electrónica redonda plana, no se dañan los labios de esta manera.
@GoodBicycle
4 ай бұрын
¡gracias por el consejo ! 😘
@johonnyquinatoa5011
7 ай бұрын
Me gustó es truco de el tubo de llanta para proteger el pedal . En mi país ecuador no encuentro el extractor de rodamientos de pedalier😊
@GoodBicycle
7 ай бұрын
¡Gracias por tu comentario! 😍 si te ha gustado este video comparte este video con tus amigos ❤️ ¡ayudará al desarrollo del canal! 📈
@claudiopamparato2733
5 ай бұрын
Great Job bro! Great pro service!
@GoodBicycle
5 ай бұрын
glad to be of service! thanks for your feedback 😘
@dperreno
8 ай бұрын
Those bottom brackets are not intended to be serviced, they are intended to be replaced. As others have noted, it isn't worth the labor to service them, and replacements are cheap.
@flexxx222
8 ай бұрын
When the bearing shells are fine then you can even replace the bearings to quality items from a reputable manufacturer like skf.
@GoodBicycle
8 ай бұрын
for the sake of content, you can serve)
@samteks125
8 ай бұрын
@@flexxx222Exactly, that would be the best compromise between throwing everything in the bin and reusing an old bearing which probably won't last long especially after pushing it out via the inner ring (as it will likely damage the bearing)
@matiasspesot7884
6 ай бұрын
Dont promote that thinking
@dperreno
6 ай бұрын
@@matiasspesot7884 Yes, I agree that it is wasteful.
@damirkolar5197
7 ай бұрын
At least metal parts (bearings) as they are 100% recyclable, should be replaced. Ones refurbished are still rusted. If you can hear them spinning, they are no good.
@GoodBicycle
6 ай бұрын
interesting comment 👍
@izaak.salomon5048
7 ай бұрын
Kotek jest cudowny! ❤️😼❤️
@GoodBicycle
7 ай бұрын
Dziękuję za komentarz! 😍 jeśli podobał Ci się ten film, udostępnij ten film swoim znajomym ❤️ pomoże to w rozwoju kanału! 📈
@antoniomora8487
7 ай бұрын
Está muy bueno el vídeo pero me gustaría saber que ingredientes usa para limpiar los rodamientos. El nombre de cada líquido que usa por ejemplo alcohol o algo así por el estilo. Por qué en cada país tienen nombre diferente. Saludos desde Cúcuta Colombia 🇨🇴🚲👍 Ya tienes un suscriptor más 👍
@GoodBicycle
7 ай бұрын
Gracias por sus comentarios. Efectivamente, hay algunos problemas con la disponibilidad y las traducciones de distintos componentes en diferentes países. Utilizamos combustible de camping para limpiar componentes muy sucios y grasientos. Para desengrasar (en el vídeo, una lata con pulverizador), utilizamos isopropanol.
@antoniomora8487
7 ай бұрын
Muchas gracias por el dato sigue adelante con sus buenos videos. Muchas gracias y muchas bendiciones Bro 🙏🤗🚴🇨🇴🚲
@antoniiocaluso1071
4 ай бұрын
this video is...ART !!! sub'd/liked, cause anyone who can make DIS look so Good, than their others must-be-viewed-too!! thank you!
@GoodBicycle
4 ай бұрын
We have the best subscribers thank you very much for your feedback 😽
@markfletcher4605
7 ай бұрын
Threaded bottom brackets like this are often so inexpensive that it is better to replace the entire bottom bracket than attempting to clean the bearings.
@GoodBicycle
7 ай бұрын
Thanks for the comment, maybe you're right.
@profesor_artes
7 ай бұрын
Hola, me gustan muchos tus videos, siempre aprendo mucho de ellos. Me gustaría saber donde se consigue la pieza para desmontar las balinesas que mostraste en el video
@GoodBicycle
7 ай бұрын
¡Estamos encantados de ser de utilidad! Gracias por sus comentarios! 😘 Las herramientas especializadas siempre se pueden encontrar en mercados online o clasificados
@piotrkreczmar4347
7 ай бұрын
Bardzo dobra instrukcja. Bez zbędnego pierdolenia.!!!
@GoodBicycle
7 ай бұрын
Dziękuję za komentarz! 😍 jeśli podobał Ci się ten film, udostępnij ten film swoim znajomym ❤️ pomoże to w rozwoju kanału! 📈
@romaint.5273
6 ай бұрын
Très bonne vidéo sur l'entretien des roulements BSA, je pratique ainsi depuis des années sur mes VTT. Par contre les roulements dans votre vidéos ont trop subi de corrosion pour être rattrapés. Les billes sont corrodées et leur état de surface a été endommagé à jamais, elles ne seront plus jamais aussi lisses que des billes neuves même après un nettoyage / regraissage, et le roulement ne sera plus jamais aussi fluide qu'un neuf en charge. Vu le prix d'un roulement acier neuf, le plus simple est de changer les roulements par des neufs pour retrouver une vraie fluidité. Mais sinon merci pour votre vidéo très bien réalisée.
@GoodBicycle
6 ай бұрын
Merci pour votre commentaire ! 😍 si vous avez aimé cette vidéo, partagez cette vidéo avec vos amis ❤️ cela aidera au développement de la chaîne ! 📈
@bazingabert3346
8 ай бұрын
i like the way you "explain / show " this ... got a question, how do you see the difference between a dirty bearing of one thats been worn out ?
@GoodBicycle
8 ай бұрын
Let's just say that if the bearing is dirty, it is definitely already worn.) In fact, it should be replaced with a new one. but the theme of the video is that the bearing can still work for a while if it is well maintained).
@tomekborucki1120
8 ай бұрын
If it's dirty it's not already worn. It's work when it feels rough when spinning.
@thangknowa3288
7 ай бұрын
Or you can replace that sealed cartridge that comes with new bearings for only $20. One side is L.H. thread, other is R.H. thread, that state "Do Not Disassemble".
@GoodBicycle
7 ай бұрын
is also a good option😇
@Jose-bm9rf
8 ай бұрын
Fat overload Too much fat is not good for softness. only grease one side of the bearing I'm sorry for my English
@GoodBicycle
8 ай бұрын
maybe you're right.
@RVéSpecVW
8 ай бұрын
Ne možná ale určitě má pravdu 👍
@Jose-bm9rf
8 ай бұрын
@@GoodBicycle gracias por aceptar mi comentario BEST regards from Spain
@lonerbikes
4 ай бұрын
what tool is this for remove barings from bottom bracket bowl ?
@GoodBicycle
4 ай бұрын
This is a handmade tool, you can find something similar in online bike shops on request Bottom Bracket Bearing Removal Tool
@lonerbikes
4 ай бұрын
@@GoodBicycle thanks 😊
@vanjuniorce
7 ай бұрын
Apply grease to only one side of the bearing
@GoodBicycle
7 ай бұрын
what happens if it goes both ways?
@vanjuniorce
7 ай бұрын
@@GoodBicycle too much grease, the bearing gets a litle stuck, it is not completely free
@mikenimmick3920
8 ай бұрын
Just buy an EMTB...easier pedaling your looking for. Problem solved. You're welcome.
@GoodBicycle
7 ай бұрын
thanks for the advice ! 😘
@Crystalheard
2 ай бұрын
Nice vid! Is the bearing pulling/pressing tool self-made?
@GoodBicycle
2 ай бұрын
Thank you for your comment. The instrument is almost handmade, we bought it from a local craftsman
@gauravjain.indore
4 ай бұрын
Could you please mention, what exact grease you used to relubricate. cant find good grease for bearings here
@GoodBicycle
4 ай бұрын
For lube, we use thick calcium grease Divinol
@theunknownunknown3007
3 ай бұрын
Hallo, leidet das Kugellager nicht durch den axialen Druck vom inneren Ring beim Auspressen? Welches Fett verwendest Du bei den Lagern? Super Videos!
@GoodBicycle
3 ай бұрын
Hallo! Das Lager wird nicht beschädigt sein, aber es ist besser, es durch ein neues zu ersetzen
@黄辰旭
8 ай бұрын
The crankarm is prowheel, The manufacturer of SRAM.
@GoodBicycle
8 ай бұрын
possibly
@Mriver71
4 ай бұрын
I don't know! But, as a mechanic I have a lot of unnecessary protocol to clean simple bearings.
@GoodBicycle
4 ай бұрын
Thank you for your feedback! 😘
@antoniodepaduafortes3110
5 ай бұрын
Onde compro essa ferramenta para tirar o rolamento?
@GoodBicycle
5 ай бұрын
Infelizmente, não posso dizer-vos. É uma ferramenta que temos na nossa oficina há vários anos. Tente pesquisar por "ferramenta de prensagem de rolamentos Hollowtech II
@WhiskeyGulf71
7 ай бұрын
How stupid ! The bearings that were removed, cleaned & re-greased are known as *SEALED* bearings. We saw this seal being removed & also cleaned & refitted. The stupid part is that it was clear that the seals had failed as evidence by the dirt inside the bearings, so what will happen in a very short space of time is these cleaned & re-greased bearings will ingest dirt & water again & we are back to square one. NeXT time, just replace the bearings for a long term repair.
@GoodBicycle
7 ай бұрын
this service will extend the life of these bearings a little bit. Obviously, they are not new.
@ivanleyong4025
6 ай бұрын
Hola me ayudas tengo holotech no me gusta , rodamientos en constante mantenimiento. Tu crees que es mejor el antiguo mecanismo? Yo pienso que si
@GoodBicycle
5 ай бұрын
Hola. Si el pedalier es de Shimano, entonces el sistema hollowtech y el cuadrado serán más o menos de la misma calidad. Los ejes de pedalier hollowtech chinos serán de peor calidad que los cuadrados, pero depende de tu suerte
@davidhakes5141
8 ай бұрын
If you're not going to talk, and describe what you are doing, at least put some captions up, for that. Including for products, and tools. Thank you.
@GoodBicycle
8 ай бұрын
The video has subtitles. Acreate them.
@Godspeed961
6 ай бұрын
Very nice and detailed video ! I love the camera ! I open the BB to clean it and i found that is pressHand (it comes off with the chainrings) ! Its a new type? Lol i dont need that BB tools anymore :D
@GoodBicycle
6 ай бұрын
Thank you for your comment. Anything can happen 😹
@VladimirSz
7 ай бұрын
When the Horse is Dead - Dismount
@GoodBicycle
7 ай бұрын
😹
@irvvine
5 ай бұрын
Way too much grease in the bearing. But otherwise this is a fine job! Installing new bearings as soon as available would be better though because these ones are rusting inside.
@GoodBicycle
5 ай бұрын
thanks for the advice ! 😘
@pawelmay1055
7 ай бұрын
taaa... ceny nowego suportu zaczynają się od 10 euro
@GoodBicycle
7 ай бұрын
Dziękuję za komentarz!
@IldefonsoMartinNovicio
4 ай бұрын
list of materials used on this video, please, for easy purchase on our local hardware, thanks
@GoodBicycle
4 ай бұрын
was that a question?
@IldefonsoMartinNovicio
4 ай бұрын
@@GoodBicycle yes, please, thanks
@leicusezeo6757
7 ай бұрын
Appreciate the process and i felt ita therapeutic in someway. Would love to do this on my bike with the proper tolols.. I wish to know what is the tool called for removing the bearing or a similar product link?
@GoodBicycle
7 ай бұрын
tool - is DIY Thank you for your comment! 😍 if you liked this video, share this video with your friends ❤️ it will help the development of the channel! 📈
@MichMaison
4 ай бұрын
Quand les billes sont usées et qu'il y a du jeu, il faut changer le boitier pédalier complet
@GoodBicycle
4 ай бұрын
Voici ce qu'ils font le plus souvent
@kenssato
4 ай бұрын
Very impressive
@GoodBicycle
4 ай бұрын
Thank you for your feedback! 😘
@KingShingWong-n5i
6 ай бұрын
The amount of Chem and time to clean this out, is far cheaper just replacing the bearing
@GoodBicycle
6 ай бұрын
Thank you for your comment!
@clebercarvalho6944
3 ай бұрын
Vídeo muito bom.
@GoodBicycle
3 ай бұрын
Obrigado pelo teu comentário! 😍 se gostaste deste vídeo, partilhe este vídeo com os seus amigos ❤️ isso ajudará no desenvolvimento do canal! 📈
@lowlevelproductions8168
4 ай бұрын
i do it every day ✌️
@GoodBicycle
4 ай бұрын
👍😁
@qwertyazerty2137
3 ай бұрын
Where can I get this bearing removal tool from?
@GoodBicycle
3 ай бұрын
This is a handmade tool, you can find something similar in online bike shops on request Bottom Bracket Bearing Removal Tool
@aessio85
7 ай бұрын
Fantastico lavoro bravo.Che prodotto usi per pulire i cuscinetti e le calotte del movimento di centro?
@GoodBicycle
7 ай бұрын
detergente per il lavaggio di motori a combustione interna se ti è piaciuto questo video, condividi questo video con i tuoi amici ❤️ aiuterà lo sviluppo del canale! 📈
@aessio85
7 ай бұрын
@@GoodBicycle perfetto grazie mille,sarebbe petrolio bianco o sbaglio? Condividerò di sicuro
@arielgerlotti8936
5 ай бұрын
no creo que te laves los dientes ,luego con ese cepillo electrico..............jajaja saludos muy buen video.
@GoodBicycle
5 ай бұрын
Este cepillo definitivamente no se utilizará
@alexsandrolopes3113
7 ай бұрын
Perfect job!
@GoodBicycle
7 ай бұрын
Thank you for your comment! 😍 if you liked this video, share this video with your friends ❤️ it will help the development of the channel! 📈
@expert0509
7 ай бұрын
Very good!😊
@GoodBicycle
7 ай бұрын
thank you for your comment! Share my videos with your friends, it will help the development of the channel! 😘
@MellowBellow_
7 ай бұрын
Could you provide an itemized list of products/tools you’re using for this process?
@GoodBicycle
7 ай бұрын
It's a bit stressful, maybe we'll add subtitles later
@philipallen4230
7 ай бұрын
Two things, 1st the grease you are using looks like assembly grease and not bearing lubricant. assembly grease is far too viscous for bottom bracket bearings. 2nd, you have used far too much grease. When lubing bottom bracket bearings, you should not completely pack them with grease, you only need to fill the grease about 30%.
@GoodBicycle
7 ай бұрын
Thank you for your feedback! 😘
@oftankoftan
4 ай бұрын
7:33 just spin it in solvent. way faster and better.
@GoodBicycle
4 ай бұрын
Thank you for your feedback! 😘
@francescoiannucci1689
8 ай бұрын
Hai smontato il movimento centrale per pulire i cuscinetti due cuscinetti sigillati nuovi costano circa 25 euro non facevi prima cosi ? E' sei anche piu' sicuro?
@GoodBicycle
8 ай бұрын
è per l'anima e per la conservazione della natura))))))
@francescoiannucci1689
8 ай бұрын
La prossima volta prova a piantare anche qualche albero per la conservazione della natura
@jameerbasha3154
4 ай бұрын
what green gel or frease are you using please
@GoodBicycle
4 ай бұрын
If you are referring to a grease, it is thick calcium grease Divinol
@ricardo.a.escudero258
7 ай бұрын
A mi me gustarua saber cuanto cuenta este mantenimeinto .? Saludos
@GoodBicycle
7 ай бұрын
Hola. En nuestro país, este tipo de trabajo cuesta 6-10 euros, pero el desmantelamiento se cobra por separado
@edgargonzalez-nv3um
7 ай бұрын
Al título del vídeo cómprate una e-bike 😄
@GoodBicycle
7 ай бұрын
😸
@fabioeduardoribeiro5529
6 ай бұрын
Muita graxa amigo
@GoodBicycle
6 ай бұрын
obrigado pelo conselho! 😘
@yosacfc
7 ай бұрын
Good work 👏
@GoodBicycle
7 ай бұрын
Thank you for your comment! ❤️❤️❤️ Share this video with your friends, it will help the development of the channel! 📈😘
@ironman1518.
7 ай бұрын
Excellent video!! Thank you; where do I get the tool to pull the bearing out please??? TIA!!
@GoodBicycle
7 ай бұрын
Glad to be of service! Thank you for your feedback! 😘 Specialized tools can always be found on online marketplaces and stores.
@ironman1518.
7 ай бұрын
What grease are you using, please? TIA! What is the brand name of the bearing puller tool you use, please?
@mahermoussallati791
7 ай бұрын
Well done 👍
@GoodBicycle
7 ай бұрын
glad to be of service! thanks for your feedback 😘
@jmcbike
2 ай бұрын
Satisfying to watch, but spinning the bearings without oil via an air gun is not good for the bearings.
@GoodBicycle
2 ай бұрын
I haven't noticed anything critical yet, but it's possible)
@anka2866
5 ай бұрын
Super film! THX xD :)))
@GoodBicycle
5 ай бұрын
glad to be of service! thanks for your feedback 😘
@craigsmith5134
8 ай бұрын
just because you can, doesn't mean you should. those bearings are super cheap to replace.
@GoodBicycle
7 ай бұрын
I agree with you!
@gordiebrooks
6 ай бұрын
Always just replace. In the end it’s safer and you can never be sure you got all the rust out plus those seals looked suspect and will just let the water back in. These replacement bearing are cheap on eBay or Amazon.
@GoodBicycle
6 ай бұрын
thanks for the advice ! 😘
@hilltopper600
2 ай бұрын
what is the green grease
@GoodBicycle
Ай бұрын
Divinol Fett Top 2003
@wallyedmonds8199
5 ай бұрын
Oh , where you get those tools .
@GoodBicycle
5 ай бұрын
These tools were gradually accumulated over the years of the workshop's work😸
@grebelnik
8 ай бұрын
Haha, 1000$ in tools instead of 5$ new bottom bracket, come on :)
@GoodBicycle
7 ай бұрын
1000$ you are very overestimating our budget)))))
@tuanminhnguyen1492
8 ай бұрын
What type of bearing grease is it?
@GoodBicycle
8 ай бұрын
calcium-based grease
@isaiahwelch8066
7 ай бұрын
@@GoodBicycle: Marine grease, being used on boats and boat trailers, is better. The reason why is because marine grease repels water, which cuts down on corrosion.
@AugustoDeRamos
7 ай бұрын
Where can I buy this tool to extract bearings?
@GoodBicycle
7 ай бұрын
Try searching in large online bike shops or on Chinese marketplaces
Пікірлер: 405