We don't have phone books anymore. Dash looks good.
@doctorfeinstone6524
7 ай бұрын
I get two every year
@jassonco
2 ай бұрын
Where the fuck do you get a fonebook 1985?!
@H-Town_Rides
10 ай бұрын
What are phone books?
@georgemartin404
Жыл бұрын
Thanks for making the next best thing, I only watch the but it looks ez thanks!
@DashSkin
Жыл бұрын
Glad you enjoy it!
@rohn40
7 ай бұрын
I have some vibration rattle noise on my 2 piece dash by windshield and from the cracks. Will this stop the rattle noise from the two piece section and from the existing cracked dash? And will the new dashskin installation result in a rattle free result?
@DashSkin
7 ай бұрын
Totally depends on how diligent you are about seeking out the spots that rattle! Check out the advice in this video: kzitem.info/news/bejne/yY6asIaBknqarXY
@WalkerTexasplumber
8 ай бұрын
Who has phone books lying around 😂
@MrMannyboy329
Жыл бұрын
Only problem I had with my dash skin was that the silicone was way to hard to squeeze out of the tube, nothing like on the video. The silicone should come in a caulk type tube, would be a who E lot easier.
@tomm9860
6 ай бұрын
Sock the silicone in hot water for an hour or so tell its warm/hot then it's much easier to work with.
@annmariefuhrmann2633
Жыл бұрын
Too bad the dash still cracks to crap on 50 thousand dollar truck
@jackwright2203
9 ай бұрын
So what happens when you need to remove the cluster or something?
@TulsaDrones
9 ай бұрын
You take it off and reinstall it when you're done. Same for heater core/blend door/or anything requiring access under the dash.
@jg1912
9 ай бұрын
DON'T DO IT. NO BUENO. THIS IS 4 LIFE.
@TulsaDrones
9 ай бұрын
@@jg1912 silicone adhesive is not epoxy dude, they're easy to remove.
@jg1912
9 ай бұрын
@@TulsaDrones good to know.... but my dashboard is hardcore fragile
@TulsaDrones
9 ай бұрын
@@jg1912 you could install one with very minimal silicone in that case so it's easier to remove. Just be sure to put weights on all of the openings and edges so it's nice and flush while the silicone cures
@douglasschmidt6873
8 ай бұрын
My dash would hit the floor board if I put weight on it 😂 I just ordered a new dash $900 not cool but unavoidable in my case
@BadBarbie33
5 ай бұрын
Can I use E6000 glue?
@909blaze7
Жыл бұрын
Nice
@LifeWithWildBill
Жыл бұрын
What silicone?
@DashSkin
Жыл бұрын
Any 100% silicone RTV will work great! We recommend clear color
@nickbacis9699
Жыл бұрын
@@DashSkin will the dash cover be able to be removed in the future? How does that work with the silicon
@DashSkin
Жыл бұрын
@@nickbacis9699 the silicone gets applied in a dotted pattern around most of the cover (outer edges), which makes removal much easier than applying a bead. We have a full set of detailed removal instructions we can send if you email customerservice@dashskin.com requesting them! Reinstall with 100% silicone RTV adhesive found at any hardware store.
@jd498
Жыл бұрын
Why not use double sided tape ?
@tomm9860
6 ай бұрын
Double sided tape its rugged enough to hold it down@@jd498
@labradorshalladore4966
Жыл бұрын
Looks like additional cost to me now I have to go purchase these items just to put my dash cover on
@DashSkin
Жыл бұрын
You don't have to use hood prop rods, they're just a visual aid. Squeegee handle, pieces of wood or PVC, whatever you've got in the garage thats roughly the correct length!
Пікірлер: 29