Just do a firmware update from a country or region that is not limited to 25 km
@saafirosz
16 күн бұрын
By using VPN ? :)
@ps-dn7ce
2 ай бұрын
Can you show how to switch POWERMORE READY = no --> yes so the range extender can be installed? For some reason, HAIBIKE and other manufacturers are blocking Bosh range extenders. People are buying bikes unaware that you cannot install range extender...
@ovyone5474
Ай бұрын
You can get a power supply from jaycar, $9 add that to the mix (36 dc to 12vdc) add the speedo adaptor from jaycar $22. (12vdc supply required). Wire it up and get exactly the same result! Total price $31! Time to wire up, approx 1hr depending on how neat you are and if you really want plugs, Not phone friendly but can be set up to allow different settings too. 2c Cheers!
@fubar1075
5 ай бұрын
Have fun.. yeah right, until you get that 504 error like always. Every product the same, sadly bosch is just too smart for these boxes.
@lucazurlo3762
5 ай бұрын
Hi, Is there no One product that really works?
@Sherlock245
3 ай бұрын
There is no error if you just follow instructions.
@lucazurlo3762
3 ай бұрын
I spoke to a mechanic who works for all brands of e-bike engine and only with Bosch they cannot be modified without having problems. They can arrive immediatly or after a fee months, but they arrive.
@Sherlock245
3 ай бұрын
@@lucazurlo3762 that is not true
@lucazurlo3762
3 ай бұрын
In every forum about this engine you can find these issues. Maybe they are unlucky😂
@RiFFtek
5 ай бұрын
What kind of kiox mount is this?
@MTB2139
7 ай бұрын
I have a 2023 Orbea Wild with a rim magnet and would greatly appreciate one of your how-to video's on derestricting it. Thank you
@Steevem23
3 ай бұрын
Hey mate I have the same bike did you manage to derestrict it, please let me know how and what have you use
@tordms
3 ай бұрын
Same here, that would be great!
@danieldabrusdan7471
4 ай бұрын
I have a Bosch CX grn.4 engine with a magnet on the fan. Kiox 500, do you have a chip for it or when will it be available?
@mrjamieholloway
2 ай бұрын
Hi what if you have the Bosch Gen4 engine with the speed sensor magnet attached to the spoke of the wheel? Which model tuning chip do you use?
@EpiceBikes
Ай бұрын
It depends what display you have on your handlebar
@beetlebopter888
7 ай бұрын
I have a mondraker crafty 2022. After 600km, the chip still works like a charm. No errors whatsoever. I note that the instruction book says to limit the top speed assist to 35km/hr, which i have done. Is there a risk in increasing the top speed assist to 50km/hr? And for anyone considering derestriction, don't use the app to update the firmware, as the purpose of these updates is to stop bikes from being derestricted.
@beetlebopter888
7 ай бұрын
Any feedback?
@EpiceBikes
7 ай бұрын
Increasing speed above 35km/h in a situation where you are travelling consistently faster then 35km/h in a straight line for long periods in turbo mode has a small chance of causing an error, This is most likely to occur in a commuting riding enviroment. If you are consistently varying speed and changing modes which is common in trail riding there is no issue over 35km/h.
@beetlebopter888
7 ай бұрын
Thanks for the feedback. I'll increase to 50 and see how it goes. I'm riding single track trails but just lacking that extra assistance in one section.
@zjedinite
7 ай бұрын
I’ve heard the same on chips for Bosch gen 4 smart system. I would hate to spend $450 for only 10 miles. I can’t see myself needing more than 39 miles on single track like you dude 😆 I’ve only hit my 20 mile limit a handful of times. I need it to speed to commute to the trails and back home. I find this error code situation too stressful. I’ll spend the money but not to have my bike go limp and cause me issues. I wish they would address this topic head on instead of companies saying “you should be fine” bs!
@pursgris
6 ай бұрын
Please make a video about the 1.2 for Rim magnet. Preferably on Cube. I am reading about bad experiences with these ... Getting tampering errors. Quite an expensive chip if you're not certain it works. Thanks.
@EpiceBikes
6 ай бұрын
We are waiting for an improved rim magnet chip to be released, The current chips are not yet reliable enough.
@RECLU1000
4 ай бұрын
@@EpiceBikesy sabes cuando estará disponible estoy con el mismo problema
@EpiceBikes
4 ай бұрын
We are expecting to have a chip available by the end of June
@RECLU1000
4 ай бұрын
@@EpiceBikes de que marca??
@EpiceBikes
4 ай бұрын
@@RECLU1000 Eplus
@robertj.b2494
2 ай бұрын
hey thats my bike :)
@CaptnSpaulding
5 ай бұрын
Can this cause the motor to go into limp mode like the Speedbox? Haven’t heard much trouble with Volspeed as they restrict lower speed.
@AndrewJohnRevell2017
3 ай бұрын
At 6:02. I like the mount for KIOX and Garmin. I want one. Where can I find them, please. Cheers
@TracyHrach
6 ай бұрын
Anything available for a 2023 pivot am shuttle with Bosch race motor?
@c1mat1
7 ай бұрын
I'm a subscriber and I like the information you put out. My only Advice is to smile a little more and act like you're having fun and you will get a lot more subscribers. Thanks for doing these videos!
@MarioGoatse
7 ай бұрын
Gotta agree. He looks a bit anxious in this video, and it feels a little off. Maybe have a quick beer or two lmao. “S’goinOn Carnts! Here’s how ya unlock ya Bosch Smart system!”😂 It’s not a massive deal though. They’re not trying to make entertainment. They’re making information for their business, and this will do.
@EpiceBikes
7 ай бұрын
Cheers mate, Yes totally agree I've got to work on that
@beetlebopter888
6 ай бұрын
No need to smile when you're telling the truth
@nyaatama8529
5 ай бұрын
@EpiceBikes don't even worry about smiling. Just relax. Your info is good and relevant, forget about the camera.
@neilmartinez143
7 ай бұрын
Do you have one for a 2023 Orbea Wild with Bosch CX Race motor and rim magnet?
@EpiceBikes
7 ай бұрын
We are expecting a rim magnet kit to be available within the next couple of months. We have tested a few early versions but they are not yet reliable enough.
@stanimirgeorgiev9792
4 ай бұрын
How much would this type of chip cost?
@EpiceBikes
4 ай бұрын
@@stanimirgeorgiev9792 Cost is expected to be around $550 AUD
@yojerico5856
6 ай бұрын
Still not clear on what the difference is Smart system and other option would help if someone did a video showing the difference I have a cube reaction Hybrid 750 with kiox 300 display what chip can I use
@EpiceBikes
5 ай бұрын
Kiox 300 display is a smart system display. You would need the chip in this video if you speed sensor is located on your rear disc rotor.
@rossgleave6993
3 ай бұрын
What is the chip called ? I have a Haibike allmtn 5 2024 with the kiox 300 smart system, this chip in the video will definitely work my friend ?
@MrAndyjane
3 күн бұрын
hi, i have the same bike and just to warn you that tried the volspeed deristrictor and all was well for about a week then the speed manipulation error code appeared which meant i had a 90 minute ( 30 mile ) unassisted ride to clear it. I contacted the supplier who said volspeed tested it against my software and couldnt find an issue so i tried again even lowering the max speed assistance down to 25 mph, but roughly a week later it was detected again and shut the motor down, this time being told that i shouldnt have used Turbo mode as much and not go above 22mph !! As this was the 3rd time speed manipulation had been detected i was faced with a bill for a local Bosch service bike shop to clear the fault codes, but they refused when they realised it had been chipped, luckily after a couple of days hard pedalling to work and back it cleared irself and i now am too worried to try again, but would love to find a reliable way to deristrict it again as once you try it 15mph seems so slow, hope this helps
@eXcaliber7
Күн бұрын
I have HaiBike AllTrack 4 and speed 25km/h is so annoying. It's still an amazing bike, don't get me wrong but...too slow. When you are connected by smartphone with bike with the recommended app during riding, I think it is impossible to trick the system just by chip. All that shit goes straight from you bike to brands like Bosh or Yamaha, and they will avoid you from tuning that dramatic 25km/h. Not sure actually. But there is potential that with every update of the software you are doing, your bike is more impossible to hack with speed.
@garradmiller5025
7 ай бұрын
Smart system with spoke magnet?
@EpiceBikes
7 ай бұрын
This works for spoke magnet.
@zjedinite
7 ай бұрын
Happy to see a different derestricted brand! 👍🏽 How is this unit different from the following. Speed box 3.0 can be adjusted to 99 km but has higher chance of setting off error code specially if set higher than 45km The Volspeed 4 could only be set up to 45 km and is said it doesn’t shoot error codes. I guess my real question is how does this unit handle the possibility of error codes!? That is the only reason most people don’t get one of these units. They don’t want their toy to go into “limp mode” 😳😂
@EpiceBikes
7 ай бұрын
In our experience all brands including Volspeed have a chance to get error codes if travelling at consistent high speeds in a commuting environment. Eg Riding in Turbo mode at 45km/h or more for hours everyday. If you change modes and vary your speed like most trail riding conditions you are far less likely to run into any errors.
@zjedinite
7 ай бұрын
@@EpiceBikes thanks for the reply. That is good to know. So if traveling long distances can I just switch modes every 5 minutes or so, would this help or is it more to do with speed rather than time? So in the case you do get an error code on your bike. What then? What is our insurance policy that the de-restrictor chip continues to work? What are the procedures to follow if this occurs?
@EpiceBikes
7 ай бұрын
Yes if travelling long distances it's best to both vary speed and the mode you are in. Its the amount of time at high speed in turbo mode that contributes most. If you get a 504 error you can reset it by removing the chip and taking the bike to a bosch dealer, Riding for 90 Minutes or simulating riding for 90 minutes by spinning the cranks with a drill. Once reset the bike and chip will continue to work as before.
@zjedinite
7 ай бұрын
@@EpiceBikes OH! Ok so I’m in. Can I make a suggestion? This information should be put on the websites selling these chips. All the EMTB riders I know are on the dark regarding what to do if this occurs. They are thinking the chip goes bad and they would have to buy a new one. And they are not cheap! After this new info provided I now can see myself getting on board. A little further investigation on my part is due. It’s very different having these statements on a website than on a forum. Something to consider, doing so would separate you from the pack as every other company I have seen only mentions “possible” errors code. Thanks for the info. And yes, I have no problem switching modes on long rides to avoid issues. Is just the information that’s missing to empower the customer to also be proactive in using the chip correctly.
Пікірлер: 63