Thanks for the tutorial!!! You can use 100% acetone (nail polish remover) from the Dollar Tree to remove the design from the cup. Works great. Thanks again. New subbie here!
@CraftableThings
3 жыл бұрын
Hmmmmm...Yessss! I will try that! I didn’t even think about it. Thank you & Welcome!
@slcraw4ord
3 жыл бұрын
Use a magic eraser along with acetone and the existing art will come right off
@patriciasiler3261
2 жыл бұрын
when you upload to design space, keep dimensions locked and change the width to 10.281 inches, it will automatically snap into correct dimensions. :)
@MsBell225
Жыл бұрын
I subscribed just because you were willing to offer a free template. I cannot wait to check out the channel.
@anacampanelli6269
5 ай бұрын
I can't find template. Can you tell me? Ive watched the video several times and I miss it😢
@hairlabgalleryinc
3 жыл бұрын
I did mine the exact way u did it in your other video and it came out perfectly amazing!!! You rock! I watched other KZitem channels and they gave me a headache they were not as through as yours....thank you!
@CraftableThings
3 жыл бұрын
Thank you so much!
@patriciaching100
3 жыл бұрын
Thank You...for using the design software as I watch you use the different effects it becomes less overwhelming. Your instructions are the best!
@CraftableThings
3 жыл бұрын
Thank you, Patricia!!! It's still a bit overwhelming for me at times. There are so many wonderful things that can be created...the issue is remembering them all. 😁
@meshacristafaro2863
3 жыл бұрын
Look great. You make everything look so easy. Everything I see a video I’m ready to run to the store my husband told me to slow down. I’m having so much fun 🤩
@CraftableThings
3 жыл бұрын
Ha! Slow down, girl! 😂😂😂 it’s so addictive. I love removing the sub paper and seeing the final product.
@soraidazavala
2 жыл бұрын
No way oracle 651 white vinyl!?!?!? This whole time people have said only on clear such a game changer thank you!!!
@CraftableThings
2 жыл бұрын
I laminated on top of it…but you can laminate directly onto it with the right temp.
@gfarrockaway9860
10 ай бұрын
Thank you again for your video I am going to use this video to do dollar tree white glass coffee mug instead, 🤞hopefully it will work the same.
@LorraineCastellon-Rowe
3 жыл бұрын
Oh honey!!! This is fabulous!!! What a great way to design any kind of cup or mug!!! I love it and you're design!!! Saving this one for future reference. Yay!!! Thank you for sharing your awesome talent!!! 🌺🌺🌺🌸🌸🌸❣❣❣💗💗💗
@TheMombieZombie
3 жыл бұрын
I was watching and was cringing when you were about to print and not curve the art. So glad you came back with the save👍☺️😉
@CraftableThings
3 жыл бұрын
😂😂 I was about to print and whew!
@TheMombieZombie
3 жыл бұрын
@@CraftableThings I remember when I first started etching glass. The glasses I first used had the slightest of tapering. So curving wasn't an issue. As soon as it was.... I learned how ASAP! It makes all the difference, especially when you forget 😅
@AWINningCombination
3 жыл бұрын
So cute! Love the design you created. 😍great inexpensive gift! That would look so cute in a gift basket!
@LindaTomanCreates
3 жыл бұрын
I am So glad I found you. I'm Trying this for first time today and Your Videos are Awesome .. Subbed for more .You are an Aeesome Creator.
@CraftableThings
3 жыл бұрын
Welcome & thank you so much, Linda!
@tonamiller8298
3 жыл бұрын
Very nice video! I did want to confirm that you did the sub press heat at 100 for 60 sec. I had to rewind to make sure I heard right.
@CraftableThings
3 жыл бұрын
I subbed it at 400 for 60.
@SouthbayCreations
3 жыл бұрын
You had me at “Hey Y’all” and that gorgeous smile!! 😁 Thank you for the videos they are very very helpful and your smile is an added bonus 🙂. Just sent a request to join your group. Keep up the great work! Jason
@CraftableThings
3 жыл бұрын
Welcome and thank you so much!!
@landas2268
3 жыл бұрын
What group??? ❤
@SouthbayCreations
3 жыл бұрын
@@landas2268 Look at the video description, the link is there
@kaysas32701
3 жыл бұрын
A Touch of Class Creations did this a few months ago too and had a similar issue with the bottom of the cup showing. I think he said instead of tucking the top edge so close to the lip, to bring it down a little. It lines up better with the bottom and still covered by the lid at the top.
@CraftableThings
3 жыл бұрын
Great suggestion! Thanks for sharing!
@ncnadinecreations4319
2 жыл бұрын
Discovered you today and I Subscribed. Nice video well explained and encouraging
@CraftableThings
2 жыл бұрын
Welcome and thank you so much!!!
@nahnisjourney1406
Жыл бұрын
That’s PRETTY! I haven’t tried to do the tapered mugs or tumblers yet. I might have to try now.
@lynnlynnc4111
3 жыл бұрын
I love this video. You have a great speaking voice. Great content. Have a Bless Day.
@CraftableThings
3 жыл бұрын
Thank you so much!
@INTLEVA
3 жыл бұрын
Pretty design and informative demo, thank you.
@CraftableThings
3 жыл бұрын
Thank you for watching, Carla!
@patriciaching100
2 жыл бұрын
Back for instruction for the orcal 651 heat press #s to lament and #s for sublimation. Mahalo!!!
@winnadudley
Жыл бұрын
Thank you so much for providing the cup template! It fits perfectly. I've tried designing my own but it's frustrating.❤
@patriciasiler3261
2 жыл бұрын
thank you so much for the template and the link to design more. your awesome :)
@CraftableThings
2 жыл бұрын
You are so welcome!
@zaccomusic
3 жыл бұрын
amazing contents friend
@audreysthoughts3698
Жыл бұрын
Thank you for sharing the template. I can never figure that stuff out. I am brand new to all this ❤️
@phillygurl2000
3 жыл бұрын
Hey lol I purchased the materials the first time you posted haven’t tried it yet but going to lol😍😍😍Ty! My go to videos❤️❤️
@patholloway2305
3 жыл бұрын
Thank you for the video. I love that cup. Good job.
@judyd6587
2 жыл бұрын
Thank you for doing that! going to hit that follow button!
@CraftableThings
2 жыл бұрын
Hi Judy!!! Welcome and thank you so much for subbing! 💕
@ivelissealbino4264
3 жыл бұрын
Gorgeous, I love it! Thank you
@CraftableThings
3 жыл бұрын
Thank you for watching!!!
@kimwolfe1375
3 жыл бұрын
Another great tutorial. Thank you
@CraftableThings
3 жыл бұрын
☺️thank you so much!!!
@Chellybelly813thatsme
3 жыл бұрын
Can’t wait to try thank you
@blessedbanks3010
3 жыл бұрын
i did a project with these cups awhile back and I was able to use nail polish remover to get the image off
@CraftableThings
3 жыл бұрын
Thank you so much for sharing!
@pixelbat
3 жыл бұрын
Try using nail polish remover (acetone) and a non abrasive cloth to remove the Dollar Tree printing. I take logos off plastic all the time using that method.
@CraftableThings
3 жыл бұрын
Thank you!!
@choclitsuga
2 жыл бұрын
That is so cute
@CraftableThings
2 жыл бұрын
Thanks!!!
@yagirltrae3947
2 жыл бұрын
I love your channel. Sure wish this was available to do in Canva. If it is I can’t figure it out.
@CraftableThings
2 жыл бұрын
I really haven’t used Canva in over a year. I’ve heard that they’ve made severe changes.
@clark.family
11 ай бұрын
I gotta find a way to do this with htv. This is game changer.
@temagee
3 жыл бұрын
Great video
@pressonnatty2677
3 жыл бұрын
Thanks for video and template.
@CraftableThings
3 жыл бұрын
Thanks for watching! ❤️
@mbiajascana596
3 жыл бұрын
du lässt meinen tag hell aussehen
@CraftableThings
3 жыл бұрын
danke
@eight21designco.42
3 жыл бұрын
My laminate film has bubbles under it. Any suggestions on how to keep that from happening? Your cup looks great!
@Blakpeaches
3 жыл бұрын
Thank you for sharing 🙂
@dianacruz7254
3 жыл бұрын
Love this! Tyfs!!
@danieldishman8611
3 жыл бұрын
Hello, I'm a huge fan. I looked through the comments but not sure if the template is already the correct size. If not could you please let me know the size the template should be. So try to bother you. Thanks in advance. P.S. new to doing tumbler/mugs. Wish me luck and best wishes to you in all your future endeavors.
@CraftableThings
3 жыл бұрын
Thank you for watching my videos and Good luck to your new journey!! The template should be the correct size.
@brendatalton6242
2 жыл бұрын
Thank you for a very informative video. Have you or anyone else watching used this template in CDS.If so what measurements did you use?I downloaded the template but it is too large for the cup. Thank you in advance
@staceejones2389
3 жыл бұрын
Could you have layered all three pieces down at the same time and then pressed it that way you can cut it when you’re done?
@CraftableThings
3 жыл бұрын
Never thought of that. It seems possible.
@heyhil20001
Жыл бұрын
Hi there! Beautiful job. Only something like this can have me go to a Dollar Tree in the rain! I wanted to ask if you ever sealed any of the DT cups and if so how did it come out? Thank you!
@danid8098
3 жыл бұрын
You can that the writing off with acetone and you will have a blank cup
@CraftableThings
3 жыл бұрын
Thank you, Dani!
@joyclayton2721
3 жыл бұрын
I love your videos and have tried the cup from dollar tree which worked well, I do want to make my own designs for cups like you showed. I was wondering which Adobe Illustrator do you have, Do they all work the same as I have seen so many different kinds of them. Thank you for your help and for your instructional videos.
@CraftableThings
3 жыл бұрын
Hi Joy!!!! Thank you so much for watching. I use the latest version of Adobe Illustrator...mostly, the desktop version. Adobe has Photoshop which is similar...but different. Which design software do you use now.
@joyclayton2721
3 жыл бұрын
@@CraftableThings I don't have any software to speak of. I was trying inkscape but it wasn't doing what I wanted done so I got rid of it. I will look at the Adobe and get it. Thank you so much for your help.
@desaraeprescott5545
4 ай бұрын
Didbyou use regular ink jet or sublimation ink??? And is that photo paper??? Trying to understand. I'm new at thhis and trying to learn
@dontworrybehappy8493
9 ай бұрын
Because the heat shrinks the vinyl and laminate, should we enlarge the template a couple percentage points in the design?
@RainorShine1
3 жыл бұрын
How do you make your temple's? Thanks for ya wonderful video
Will a printable iron on picture work for this process? And can I use any color vinyl? Thanks. Love your videos.
@nicoledingwell2916
2 жыл бұрын
love this video. would you mind sharing the size please :)
@aviveros887
3 жыл бұрын
I changed from asub to honestly spinking paper and I stopped using cmyk it’s changed my life
@CraftableThings
3 жыл бұрын
Awesome!
@TJ-yk8tq
2 жыл бұрын
Question, I've seen others sublimate on 651 oracle without laminate - is that possible for the cups? Also, will this work on other brands of perm vinyl?
@leticiaizarraras7622
2 жыл бұрын
Hi I love your tutorials! I do have a question. Why did my laminate sheet take off my vinyl?
@hmoobxws
2 жыл бұрын
I’m getting bubbles after pressing the vinyl and laminate together. What am I doing wrong?
@TheBestUni
3 жыл бұрын
❤️
@pamelajeansoriginals
3 жыл бұрын
I have a question. I recently heard that it’s possible to sub right onto 651 permanent vinyl and also the laminate sheets. Is there a reason you use both and not just sub the permanent vinyl and apply to the cup. I’m still new to all this and was just wondering. 😌
@CraftableThings
3 жыл бұрын
You can sub on permanent 651 vinyl. The colors aren’t as vibrant and you’ll need to reduce the heat and time.
@pamelajeansoriginals
3 жыл бұрын
@@CraftableThings Thankyou!
@dragon13571
3 жыл бұрын
This is a great tutorial! Ty! I have questions I hope you can help with. Do you have to use the special sublimation ink for this? And do you have to have a heat press or can you use an iron?
@CraftableThings
3 жыл бұрын
Thank you! Yes, for this, you have to have a special sublimation ink/printer. Sublimation requires a high temperature. Most irons cannot get to the heat required. The Cricut Easy Press 2 can.
@dragon13571
3 жыл бұрын
@@CraftableThings thanks a bunch for answering my questions. It was very helpful! Happy New Year!
@robertlewis9048
3 жыл бұрын
I just tried laminating vinyl and the laminate peeled right off the vinyl. I did 400 for 10 then 400 for 60 and let it cool. Any suggestions? Thanks for the videos!
@CraftableThings
3 жыл бұрын
Hi Robert! Thanks for watching. Are you using thermal laminate sheets. Those are the only ones that I've found to be successful.
@robertlewis9048
3 жыл бұрын
@@CraftableThings yes, scotch brand. I've Laminated wood with success but the vinyl is giving me problems.
@sandracarson4339
2 жыл бұрын
@@robertlewis9048 Me too
@rosiecortinas4725
9 ай бұрын
I dont have illustrator :( I have elements but don't know how to use it yet :(
@stacyn8075
2 жыл бұрын
I have downloaded the template and uploaded to Adobe but it won't let me draw inside, what is the trick? Can you make a video of how you uploaded it? I did the drag and drop, the place, making a new template...stuck
@leighaparker8798
3 жыл бұрын
Heyyyy girl!
@TechCristina
3 жыл бұрын
Do the colors come out better this way than if you use printable vinyl?
@CraftableThings
3 жыл бұрын
The do and they definitely come out way better than subbing directly onto the vinyl.
@sharitaharris7295
3 жыл бұрын
Good Morning! All of my designs this far have been in Cricut and I want to get into designing on other software like Photoshop or Illustrator. I have noticed you use Illustrator often. Do you think it is sufficient to learn just Illustrator or is it really beneficial to also learn photoshop as well?
@CraftableThings
3 жыл бұрын
I love Illustrator. It's easier for me and I work with graphic based illustrations/designs most. I do like Photoshop for my photo based designs...whenever I actually do one.
@kokopellicodcs3499
3 жыл бұрын
HOW DO YOU MAKE THE TEMPLATE FOR THIS CUP OR ANY SIZE TUMBLER?
@CraftableThings
3 жыл бұрын
www.onlinelabels.com/label-generator-tools/tapered-label-generator.aspx this might be the quickest way. You’ll have to convert the file to an image once it’s done.
@kokopellicodcs3499
3 жыл бұрын
@@CraftableThings I'LL try it & see if it works. Thank You
@capturedbydaisy5446
3 жыл бұрын
Can you use the template in Photoshop? Will it cut the design into the template shape? Thanks
@CraftableThings
3 жыл бұрын
Yes you can!
@diondriarose
2 жыл бұрын
hi could you tell me what the measure is for the triangle you have the template in
@cindybaker7663
2 жыл бұрын
Will the laminate make it washable
@CraftableThings
2 жыл бұрын
Yes, it’s washable. Not dishwasher safe, though
@iamjacqued5203
3 жыл бұрын
how do you keep the measurements correct? They keep changing and I can't seem to keep them from doing so...uuugh
@CraftableThings
3 жыл бұрын
What design software are you using? It shouldn’t resize. If you’re designing within the template, make sure to only click the actual art that you want to manipulate.
@robincrutchfield-blum9665
2 жыл бұрын
Hi, I'm new to this craft. Was the image you created printed with regular ink or sublimation ink? Thank you.
@CraftableThings
2 жыл бұрын
This was printed with sublimation ink. Thanks for watching!
@BettieGipson
3 жыл бұрын
How many days does it take to fully cure once you have done these steps?
@CraftableThings
3 жыл бұрын
I wait about a week before using the cups and washing them. Are you planning on sealing them? If so, it’ll depend on that method.
@tierrabriggs7581
3 жыл бұрын
So In design space I would just add a pattern? I’m going to try it I already have the materials 💕
@CraftableThings
3 жыл бұрын
Yep! Add the pattern to design space and slice it with your template.
@JessicaMartinez-pi2xk
2 жыл бұрын
Can I use a laminater for this process
@ashleyboyce2458
Жыл бұрын
How did you get the measurements for the cup?
@leahronise9983
3 жыл бұрын
Great job. I didn’t see the template.
@CraftableThings
3 жыл бұрын
drive.google.com/file/d/1y0FxDPt4W91-lCJlP6G7zGyT4AnbKT5f/view?usp=sharing - This is the blank template. Is that what you were looking for?
@mrsdougschmidt
2 жыл бұрын
what is the measurement on template
@yazzyscreations4165
3 жыл бұрын
Could that work for just a logo I want to make my friend a LV Starbucks cup also I need to sealed it if so what’s your recommendations Thank you 😊
@CraftableThings
3 жыл бұрын
It can totally work with the LV logo. I prefer sealing with epoxy. In my opinion, it seals best and the cup will last longer.
@silviagarza8328
3 жыл бұрын
Hello! Great tutorial. Would you have any idea why when I press the laminate on the vinyl I get so many air bubbles?
@CraftableThings
3 жыл бұрын
Try adjusting the pressure. It happens to me sometimes when there isn't enough pressure. While it's still warm, I smooth the bubbles out.
@cynthialopez309
3 жыл бұрын
Hi! Thank you for sharing! Did u get a chance to try it in water
@CraftableThings
3 жыл бұрын
Yes...maybe twice. It's still ok.
@SamanthaDaoud
3 жыл бұрын
Hi! Great content! :) new subscriber! what do you recommend sealing with if your selling and can’t wait 28 days for the mod poge to cure? Can you do a video sealing these cups with different sealers and seeing how they hold up? That would be soooo helpful!!!
@CraftableThings
3 жыл бұрын
Thanks for watching! I would go with epoxy for sure.
@clarisasanchez5771
3 жыл бұрын
Hello, i made the cup just you did it, but the laminate peal off, i used the material that you use in this video, when i went to put the vinyl in the cup they did not was together. so can you tell me if that will happened and why, please. thank you
@CraftableThings
3 жыл бұрын
The laminate wouldn't stick to the vinyl? I've seen this happen with the self-seal laminate sheets. It has to be thermal.
@clarisasanchez5771
3 жыл бұрын
@@CraftableThings Yes, the laminate is thermal, it stuck to the vinyl, at the time of sticking it to the cup the laminate detached all from the vinyl.
@All-Is-well489
3 жыл бұрын
Should I use 3mil thickness lamination sheet or 5mil? Thanks
@CraftableThings
3 жыл бұрын
It doesn't matter. I usually use 3 mil.
@vagabonddeesadventures8491
3 жыл бұрын
I recently lost my laptop. Is there a software I can use with my iPad? I have all of the other supplies. I just need to be able to design the sublimation sheet. I have a printer and press.
@CraftableThings
3 жыл бұрын
Yes, there are design apps that you can use on your iPad. Most of the big names have an app version of their software.
@ebrookej
3 жыл бұрын
What temp did you press at with you were sublimating the image? 100 degrees or did you take it down 100 degrees (300 from 400)?
@CraftableThings
3 жыл бұрын
I press as 400 degrees when pressing the sub image. I press for about 10-15 seconds when pressing the lamination sheet to the vinyl.
@Ari_gatcha_gamergirl
3 жыл бұрын
do u have to use the laminate sheets saw someone not using the sheets
@CraftableThings
3 жыл бұрын
I haven't tried these without laminate. I do know that if you are subbing directly on the oracal 651, it will sub. However, it isn't as vibrant as when you use the laminate.
@carlamccain3981
3 жыл бұрын
I tried it but my laminate paper keep popping off it doesn’t stick to the oracal 😪
@CraftableThings
3 жыл бұрын
are you using thermal laminate?
@Rojonda25
3 жыл бұрын
Hello want to know what did print the image on what can of paper?
@CraftableThings
3 жыл бұрын
I printed the image on sublimation paper and them pressed it onto laminate covered oracal 651 vinyl.
@tinarackley6348
3 жыл бұрын
I wonder if anyone has used the self seal laminated sheets on anything when making?
@CraftableThings
3 жыл бұрын
Hi Tina! I haven't tried the self seals.
@kellybabb1264
3 жыл бұрын
How long does the cup and design last with regular use and hand washing?
@CraftableThings
3 жыл бұрын
I haven't used it in months. They hold up pretty well if it's sealed.
@mixedchocolite
3 жыл бұрын
What paper size do u use for A Sub paper I’m usingA Sub 8.5 x 11 but I have no clue what type it is when I leave it on us letter I get an error that my setting n type don’t match bc I choose us letter and presentation matte 🤷♀️
@CraftableThings
3 жыл бұрын
What printer do you have? Sometimes that happens to me if the print settings (computer) do not match what I programmed in the printer. I usually bypass and click print with specified settings.
@mixedchocolite
3 жыл бұрын
Wf 7210 so I have to change the settings on the printer too?
@CraftableThings
3 жыл бұрын
You might need to. I can bypass it on my printer. Not sure if you can on yours.
@temagee
3 жыл бұрын
New subbbie!!!!How do I get the template that you used?
@temagee
3 жыл бұрын
OOooops found the link
@CraftableThings
3 жыл бұрын
Thank you so much! Glad you found the template!
@temagee
3 жыл бұрын
@@CraftableThings do you have the template for the graduate tumbler it's fatter on top... tried making one but it didn't work
@brittanyshafer3130
3 жыл бұрын
How do you get the sublimation so bright? Mine are all faded :(
@CraftableThings
3 жыл бұрын
@@brittanyshafer3130 Hi Brittany, What settings are you using?
@Montriese
3 жыл бұрын
Does it have to be Oracal 651? Can it not be reg white heat transfer vinyl?
@CraftableThings
3 жыл бұрын
I haven’t found a regular white htv that withstands the sublimation process. I have been able to sub on cricut removable vinyl. It’s not as vibrant, though.
@MicaelaNicole330
3 жыл бұрын
@@CraftableThings i buy all my permanent vinyl from crafthtv over in the UK. shipping is super fast. you get 12in x5 ft for $2 each. i have every color. i use their fairy tale brand. I am able to sub on their white and clear permanent vinyl and its not Oracal 651 brand and just yesterday i discovered how to sub on DT glass cutting boards using the clear shelf liner from DT as well. using $1 shelf liner saves from wasting vinyl.
@msprosperous1107
3 жыл бұрын
Can it be any outdoor vinyl or does it have to be oracle
@CraftableThings
3 жыл бұрын
I haven't tried outdoor vinyl. However, most vinyls do not hold up well under the heat.
@handkcrafts5759
3 жыл бұрын
I downloaded the templete but it is way to big to cut on my maker, how do I fix this. TIA
@handkcrafts5759
3 жыл бұрын
in design space?
@CraftableThings
3 жыл бұрын
Hi! Thanks for your support. There's no way to cut it in design space. The circumference is too large for Cricut's limited print capabilities. It's over 10 inches wide. Do you use another design software? That will be the only way to print it for a full wrap of the cup. You'll have to cut it manually. I hope this helps.
@lynetteholliday8099
3 жыл бұрын
Does it matter if the 651 is matte or glossy. I try and my laminate did not adhere to the vinyl.
@CraftableThings
3 жыл бұрын
I usually use glossy. I'm going to try with matte. Are you getting bubbles?
@lynetteholliday8099
3 жыл бұрын
@@CraftableThings Yes and the laminate is not sticking at all. It is the thermal laminate from Amazon.
@shamerareese9204
3 жыл бұрын
Do you have the measurements for the template, do we have to resize I’m using Silhouette
@CraftableThings
3 жыл бұрын
if you download the png, you shouldn't have to resize once you upload to silhouette. Please let me know if it doesn't work.
@traceycapps4317
3 жыл бұрын
Am using Circut Design do you have measurements for it...Thanks in advance
@nikita23yr
3 жыл бұрын
So 651 oracle vinyl can be sublimated ?
@CraftableThings
3 жыл бұрын
it can be subbed on directly. The laminate sheet makes color pop more, though.
@brandyaney3422
3 жыл бұрын
Are you using a certain kind of paper ?
@CraftableThings
3 жыл бұрын
yes, A-Sub 125
@dberry1964
3 жыл бұрын
The paper from my design keeps sticking to the laminating sheet. Then I have this glue like film that I can't get off the cup without scrubbing it with a scrubber, which ruins the design. :(
@CraftableThings
3 жыл бұрын
The rough side of the laminating sheet has to be face down on the vinyl. Place the image face down on the shiny side of the laminating sheet. It sounds like it’s sticking to the adhesive of the vinyl.
Пікірлер: 225