Today, we show you how to desolder an SMD LED from an electronic board. This way the LED can either be replaced or reused. The process is pretty simple and only requires a soldering iron and some flux. Remember here that lots of flux is the key to reflow the original solder!
► YOU WILL NEED
* Soldering iron
* Flux
* Small piece of metal. Note: that one is not always needed since many LEDs are nowadays mounted on an aluminium heat sink.
► DISCLAIMER
Always make sure you operate in a safe and secure manner.
For this project this means, do not burn yourself to death, even if you are into that kinda things.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► SUBSCRIBE (weekly content)! bit.ly/SubscribeTheLabOtomy
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► CATCHUP! All Videos bit.ly/AllTheLabOtomy
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
▼ CONNECT!
► Facebook: bit.ly/CauseIHaveNoFriends
► Twitter: bit.ly/LikeASheep
► Instagram: bit.ly/NarcissisticByNature
► Tumblr: bit.ly/AnotherCatGif
► Pinterest: bit.ly/SniffDaMoodBoard
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
▼ MUSIC
► "Pop the microwave" by The LabOtomy
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
╔══╦╗╔╦═╦╗╔═╦╗╔═╦══╦═╦╗╔╦╗╔╗
╚╗╔╣╚╝║═╣║║═║╚╣║╠╗╔╣║║╚╝╠╗╔╝
═║║║╔╗║═╣╚╣╦║║║║║║║║║║╠╣║║║═
═╚╝╚╝╚╩═╩═╩╩╩═╩═╝╚╝╚═╩╝╚╝╚╝═
Негізгі бет Тәжірибелік нұсқаулар және стиль HOW TO Desolder a LED | SMD LED Desoldering Tutorial
Пікірлер: 34