Man, I wish all these types of videos were like this. He sticks to the subject and does not ramble about a bunch of bs. It's short and straight to the point. Absolutely great video. Thank you!
@UBRArsenal
3 жыл бұрын
Hi Michael, I'm really glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
@KindredWoD
6 жыл бұрын
Extremely thorough! My bf bought me a Sig P320 for xmas and I immediately started poking around for videos of proper disassembly. This is no frills or fluff, no showing off excessive flashiness. Just the basic info, but filmed, shown, and explained in a very thorough manner. Wonderfully done. Thank you so much!
@UBRArsenal
6 жыл бұрын
Thanks so much for the awesome feedback! Also thanks for watching my video!
@mr.response5959
6 жыл бұрын
Same here. My thoughts exactly.
@jeramie630
4 жыл бұрын
Scorpion I hate videos that have a 5 min intro about stuff I didn’t search for but this got to the point instantly and just exactly what I wanted to know
@OhDannyboy7
4 жыл бұрын
One note for fellow noobs. Pay attention to the narrow side of the recoil spring (where his right thumb inserts it), it has two small holes. Make sure the holes face vertically and not horizontally, otherwise you'll have an issue like I did where the wider side of the recoil spring sticks out in the front too far when you go to reassemble it.
@UBRArsenal
4 жыл бұрын
Thanks for leaving tip for people that are just starting out. Thanks for watching and don't forget to subscribe.
@williepilande2412
Жыл бұрын
Same thing happen to me it’s assemble already but the the spring stick out how do you fix it . Thanks
@williamhaynie3253
Жыл бұрын
I know it’s been 2 years. But I’ve been stuck on this for 30 min. This is the best KZitem comment of all time
@Ethan-tb2in
Жыл бұрын
thanks a lot for mentioning this. was wondering why it wasn't going back together right
@bloodwraythetheexiled2195
Жыл бұрын
I sat here for 20 minutes rewatching until I saw your comment....you saved much frustration
@xxxbuckxshotxxx6676
5 жыл бұрын
This is one of the better gun breakdown videos I’ve seen. To the point, good quality, you know all the correct names for the parts of the gun. 10/10 would recommend
@UBRArsenal
5 жыл бұрын
Thanks for watching and taking the time to leave a great comment!
@xxxbuckxshotxxx6676
5 жыл бұрын
UBR Tech no problem! Please make as many of these as you can
@jimquinlan247
6 жыл бұрын
CAUTIONARY ADVICE: WHEN REPLACING THE GUIDE ROD SPRING TO THE BBL...MAKE SURE THE 2 WEE INDENTATIONS ON THE CIRCULAR DISK ARE ARRANGED VERTICAL ....
@Mrsaylessnotmore
5 жыл бұрын
The full size Nitron p320 only has one indentation. How do you insert that one
@nicholasoliver4128
4 жыл бұрын
I only see those on the x carries i have ...which did throw me off the first time i took them apart ...i have the p 320 shown in the video and it guide rod spring has a full circle without indentations and can place it any way with no problems
@125AXer
4 жыл бұрын
The inner end tab of my P320 recoil spring is not round, it has the appearance of a circular disc altered with flattened opposing sides. There are two holes through the disc, one on each side of center, and located between the center rod attachment and the curved portions. When delivered, the assembly had the flat sides perpendicular to the barrel, so I'm going to say that orientation is important. The P320 has been out for half a dozen years now, this is the latest evolution? 5/2020
@packyoursac
3 жыл бұрын
Bless your soul
@bobinhaiti
3 жыл бұрын
Thank you! Wish I had read this 30 minutes ago...
@bjmcmahon722
Жыл бұрын
2023...still one of the best P320 X assemble/dis on @KZitem ...thank you sir.
@UBRArsenal
Жыл бұрын
I’m so glad you liked the video. Thanks for watching and taking the time to leave an awesome comment. Have a great day. 👍🏼🤜🤛
@sheweylolz
Жыл бұрын
Thank you for not making this a 17 minute frill piece. Great video and super helpful
@UBRArsenal
Жыл бұрын
I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day. 👍🏼🤜🤛
@hensli
3 жыл бұрын
thank you man, just got a p320 and it was awesome to be able to type in 3 words and find an entire field strip manual
@UBRArsenal
3 жыл бұрын
I'm glad the video helped out. Thanks for leaving an awesome comment and I hope you subscribed. :)
@robteaster2446
2 жыл бұрын
Its almost funny how many times I refer back to this video to check my process for disassembly. Clear, easy to follow instructions.
@UBRArsenal
2 жыл бұрын
Hey Rob, I'm happy to hear you refer back to this video when you need to field strip your P320. Thanks for leaving a great comment.
@docschwartz3646
4 ай бұрын
I'm new with semi-autos and was impressed with the simplicity and yet thoroughness of this tutorial. The very first disassembly was tight but after that, all's gone well.Tomorrow I go test my skills at the range.
@UBRArsenal
4 ай бұрын
I’m glad you liked the video. Have a good time at the range. Thanks for watching and leaving a comment. Have a great day.
@nathanhale280
2 ай бұрын
Thank you for sharing this video. I just bought a Sig Sauer P320 compact and had no idea how to break it down. It's a very easy process thanks to your informative video.
@UBRArsenal
2 ай бұрын
I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
@daniguillen6995
2 жыл бұрын
Very very helpful. My hubby ( a retired Marine) got me my P320 for our anniversary and he "tasked" me to break down, lubricate and reassemble my Sig. Happy to say, I passed inspection. Thank you very much.
@UBRArsenal
2 жыл бұрын
Hi Dani, I'm so glad the video was helpful and you were able to pass inspection. Also, please thank your husband for his services from me. Without men like him, we wouldn't have the freedoms that we have today. Thanks so much for watching and taking the time to leave a comment. Have a great day.
@davehammett9378
2 жыл бұрын
Easily the best "to the point" instruction. My wife just took my pistol apart twice in 5 minutes. Excellent bro!!
@UBRArsenal
2 жыл бұрын
Hi Dave, I’m so glad you liked the video and it help out. Thanks for watching and leaving a comment. Have a great day and please tell a friend about the channel. 😁🤜🏼🤛🏼
@Chaser2
2 жыл бұрын
Terrific instructions. Very thorough and thoughtfully produced and edited. Very well done. This is what the internet was made for.
@UBRArsenal
2 жыл бұрын
Hi Charles, I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
@njfuentesrespecter81
5 жыл бұрын
Bravo, man. I’m very new to semi-auto pistols and this video is now permanently bookmarked. Much easier to understand than a manual. Thank you
@UBRArsenal
5 жыл бұрын
I'm very happy you enjoyed the video. Thanks so much for the great comment!
@6548ww
3 жыл бұрын
This is the most detailed field strip video of the Sig P320 on the Internet 👍
@UBRArsenal
3 жыл бұрын
Hi Walter, I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
@robteaster2446
2 жыл бұрын
Funny thing. I have this video saved and refer to it almost everything I clean my 320. Nice video. Easy to follow and understand.
@UBRArsenal
2 жыл бұрын
Hey Rob, it makes me really happy to hear you use my video almost every time you clean your P320. You rock man! Thanks for watching and leaving a comment. Have a great day and please tell a friend about the channel. :)
@jasonc8241
4 жыл бұрын
Really good job dude. You made it simple and easy.
@UBRArsenal
4 жыл бұрын
Thanks so much for the positive feedback. Thanks for watching and don't forget to subscribe. :)
@mr.response5959
6 жыл бұрын
I LOVE my P320. It's nice not having to worry about using a writing pen to push back the mechanism in the back of the gun while sliding the rail back and up. Then, lifting the rack up off the frame and having the spring and the mechanism go flying across the room! Not to mention other springs you have to take off and remember where they went when you put it back together as well as any other little part you had to remove.
@ponygirl9831
Жыл бұрын
Very easy to fallow. My husband was snoring away and didn’t want to wake him to ask how to take down my gun.
@UBRArsenal
Жыл бұрын
Hey Pony, I’m so glad the video helped out. Thanks for watching and leaving a comment. Have a great day.
@JayThatsMe
2 ай бұрын
This is an excellent video. I learned how to properly disassemble my P 320. Thank you! Very well done.
@UBRArsenal
2 ай бұрын
I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
@amwebb20
3 жыл бұрын
Thank you. Not a lot of over talking. Straight to to it, not wasting time.
@UBRArsenal
3 жыл бұрын
I'm glad you liked the video. Thanks for leaving a nice comment and I hope you subscribed.
@wowodan6635
6 жыл бұрын
Very nice straight-forward "no-frills" instructional video. With my P320-C, after reassembly, the trigger does not function and I unable to reinsert the magazine unless I do another slide lock pullback. I spoke to the Sig Sauer Customer service and I was informed that this is pretty normal after disassembly.
@eddiehoward5718
3 жыл бұрын
Easy. Simple. To the point. Perfect. Well done bro.
@UBRArsenal
3 жыл бұрын
Hi Eddie, I'm really glad you liked the video. Thanks for taking the time to leave a great comment and I hope you subscribed. Have a great day! :)
@user-tv7pm6sq2m
3 ай бұрын
best video for take down and reassembley i have ever seen!
@UBRArsenal
3 ай бұрын
I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
@dahveed284
3 жыл бұрын
Thanks for this great video. Sweet and to the point. My spring assembly had a disk that had 2 flat sides on the disk. Getting them orientated correctly is key on the recent versions of these pistols. If your spring is sticking out of the gun upon reassembly, take it back apart and change the direction of those flat sides.
@UBRArsenal
3 жыл бұрын
Hi Dahveed, I’m glad you liked the video. I think SIG has updated the recoil spring and that’s why you have a different recoil spring then the one in the video. Thanks watching and leaving a comment. Have a great day.
@maeganmaren
5 жыл бұрын
Sig should pay you for this demo/how-to.
@UBRArsenal
5 жыл бұрын
Thanks so much! I wish they would pay me for this video.
@mindyindyindy4811
Жыл бұрын
If only all how to videos were this good. I have downloaded this so I don't have to keep asking the armorer on the range for help. I feel so embarrassed every time.
@UBRArsenal
Жыл бұрын
I’m so glad you liked the video. Don’t be embarrassed, I’m sure plenty of people have to ask for help. Thanks for watching and leaving a comment. Have a great day. 👍🏼🤜🤛
@ericcollins4883
8 ай бұрын
Excellent vid. Thank you for being straightforward and direct, without every opinion you have, like some of the other vids. Subscribed
@UBRArsenal
8 ай бұрын
I’m so glad you liked the video. Thanks for watching and subscribing. Have a great day.
@lennygoacher870
5 жыл бұрын
Thank you for posting this video, straight to the point and no BS.
@UBRArsenal
5 жыл бұрын
Happy to hear my video helped. Thanks for watching my video.
@dewarner12
4 жыл бұрын
This video was really helpful. I am no longer afraid that after I disassemble this gun I will have to take a ziplock bag of parts to a gunsmith for reassembly.
@UBRArsenal
4 жыл бұрын
I'm so glad to hear my video helped. Thanks for watching and for leaving an awesome comment. Enjoy your new gun. Don't forget to subscribe. ;)
@J1Z06
Жыл бұрын
Thank You! I'm on My way to pick mine up! I'll clean it before going to the range.
@UBRArsenal
Жыл бұрын
You're welcome. I'm glad you liked the video. Congrats on your new pistol. Thanks for watching and leaving a comment. Have a great day! 👍🏼🤜🤛
@dennyadkins21
5 жыл бұрын
Great video. Everything a new gun owner needs to know
@UBRArsenal
5 жыл бұрын
Thanks and I'm glad the video helped you.
@blake119538
2 жыл бұрын
Terrific breakdown video, somebody sponsor this man.
@UBRArsenal
2 жыл бұрын
Hi Blake, I'm so glad you like the video. I hope someone sees your comment and sponsors me. Haha! Thanks so much for watching and leaving a comment. Have a great day!
@kingmidas9409
4 жыл бұрын
Thank you so much!! this really helped me to understand better than the manual booklet.
@UBRArsenal
4 жыл бұрын
Glad my video helped. Don't forget to subscribe and thanks for watching.
@momanddadplusus
4 жыл бұрын
Nice video covering just the needed info. Gonna go clean my X-Five now! 😁
@cinimodcinimod2395
Жыл бұрын
Thank you! I forgot the take down lever and was freaking out.
@UBRArsenal
Жыл бұрын
Hi, I’m so glad the video helped out. Thanks for watching and leaving a comment. Have a great day. 👍🏼
@Eric_Feigl
2 жыл бұрын
Thank you for the great video! Just used it for my P320.
@UBRArsenal
2 жыл бұрын
Hi Eric, I’m glad the video helped out. Thanks for watching and leaving a comment. Have a great day and please tell a friend about the channel. 😁🤜🏼🤛🏼
@erickabirch8233
6 жыл бұрын
Thanks! Very helpful for those of us trying to do this stuff correctly on our own.
@UBRArsenal
6 жыл бұрын
It really makes me happy to know my videos are helping people be knowledgeable and safe with their firearms. Thanks for the great comments!!
@krystellemarie18
2 ай бұрын
Thank you for your straight to the point, informative video. Subscribed!
@UBRArsenal
2 ай бұрын
I’m glad you liked the video. Thanks for subscribing and leaving a comment. Have a great day.
@rsahadi1975
3 жыл бұрын
Thanks for the video. For some reason, the first time I tried putting the slide back on, my trigger didn't working properly. I took the slide off again and put it back on following your instructions and the trigger fixed itself.
@UBRArsenal
3 жыл бұрын
Hi Rsahadi, I’m glad the video helped out. Thanks for watching and leaving a comment. Have a great day.
@TheKingIndeed
5 жыл бұрын
I got a P320 and u broke it down perfectly
@jwilliams3170
8 ай бұрын
As a Glock guy who is having an identity crisis and is trying out the X Carry, thank you.
@UBRArsenal
8 ай бұрын
You’re welcome. It’s okay to try new things. 😁 👍🏼🤜🤛
@peters303
4 жыл бұрын
Clear & simple. Appreciated!
@UBRArsenal
4 жыл бұрын
I'm glad you liked the video. Thanks for watching and I hope you subscribed. :)
@GregoryPane
2 жыл бұрын
AMAZING video once again, Harry! So nicely and thoroughly demonstrated! I like the SIG Sauers very much too, all the models, expecially the P227! But the P320 looks AWESOME too! Though I prefer the full-sized version of it! Anyhow, it is such a nice and practical firearm! Thank you once again for showing us its special functions!
@UBRArsenal
2 жыл бұрын
Hey Gregor, I agree, SIG makes some great pistols. So far I think the P320 is my favorite. I think because how modular it is. The options are endless. Thanks again for watching and leaving a comment on another video. I really appreciate it. Have a great day.
@nathanbieber2840
2 жыл бұрын
thank you for this video! just spent a check on the ZEV Xcompact 320 (its SIG, but the slide and barrel and trigger group has been upgraded) and I tried just figuring it out... wish i watched this 1st.. my guide rod stuck out a quarter inch ha, and i couldnt manover the take down lever, and took me about 10 minutes to try and get it apart again to try again. subing to your channel for sure!!! im used to the OG m9A1 ha
@nathanbieber2840
2 жыл бұрын
alright alright i was doing way wrong.. in my defense,, only my 2nd pistol haha
@UBRArsenal
2 жыл бұрын
Hi Nathan, oh you bought a ZEV Xcompact too. I bought one and uploaded a unboxing on my channel. I love that pistol. Good choice. I’m so happy the video helped out. Thanks for watching and leaving a comment.
@UBRArsenal
2 жыл бұрын
No worries, you’re right, it’s your second pistol and at least you’re taking the time to learn how to field strip your new pistol. Hope you have a great weekend.
@gatesbisson1746
3 жыл бұрын
the best explanation yet , well done, thank you
@UBRArsenal
3 жыл бұрын
I’m glad you liked the video. Thanks for leaving an awesome comment and I hope you subscribed. :)
@jeffcampbell8809
5 жыл бұрын
Thanks great for rookie gun owner trying to figure out how to take charge of ownership
@UBRArsenal
5 жыл бұрын
I'm glad my video helped. Please subscribe, it helps my channel grow.
@erikflolo6
4 жыл бұрын
Thank you so much for this video. Very helpful, 10/10
@UBRArsenal
4 жыл бұрын
I'm really glad my video helped. Thanks for the awesome comment and for watching. Hope you subscribed. :)
@thebrownacid9027
3 жыл бұрын
Thanks man. This was incredibly helpful for my first time
@UBRArsenal
3 жыл бұрын
Hi Dude, I’m glad the video helped you out. Thanks for watching and leaving a comment. Have a great day!
@Prairie7777
2 жыл бұрын
EXCELLENT tutorial and very informative!!! Well Done!!!
@UBRArsenal
2 жыл бұрын
Hi Prairie, I’m so glad to see you liked the video. Thanks for watching and leaving an awesome comment. Have a great day and please tell your friends about the channel. 😁🤜🏼🤛🏼
@CB-uc2zm
Жыл бұрын
That makes cleaning pretty easy
@UBRArsenal
Жыл бұрын
Hey CB, I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
@Beastkiller38
Жыл бұрын
You were brief and to the point you Just got a like and new subscriber
@UBRArsenal
Жыл бұрын
I’m so glad you liked the video. Thanks for liking, leaving a comment and especially subscribing. Have a great day. 👍🏼🤜🤛
@rboconnor8440
Жыл бұрын
i looked at 3 other vireo and your was the best thank you very much
@UBRArsenal
Жыл бұрын
Hi RB, I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
@lro001
3 жыл бұрын
All HAIL UBR Tech!!!!🙌🏿
@UBRArsenal
3 жыл бұрын
Hahaha. Thanks Iro001. I also have video reviews on guns, gun related accessories and how to swap your P365 trigger etc. Feel free to check them out. Have a great day!
@lro001
3 жыл бұрын
@@UBRArsenal thank you....same here.
@NZbo-.-.-614
5 жыл бұрын
Simple. Useful. No BS. Thank you.
@UBRArsenal
5 жыл бұрын
Thanks my man!!
@mikekantor453
3 жыл бұрын
Excellent video! You answered all my questions. Thank you!
@UBRArsenal
3 жыл бұрын
Awesome, I’m glad my video helped. Thanks for leaving a great comment and I hope you subscribed. :)
@mikekantor453
3 жыл бұрын
@@UBRArsenal yes I did subscribe.
@UBRArsenal
3 жыл бұрын
@@mikekantor453 You’re the man. Thanks!
@nicolascastellano5325
Жыл бұрын
Very thorough, but holy shit what an effort
@UBRArsenal
Жыл бұрын
Hey Nicolas, I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
@dillonsereika3655
3 жыл бұрын
Smooth brotha. Need more like ya.
@UBRArsenal
3 жыл бұрын
Hi Dillon, I'm glad you liked the video. Thanks for leaving a nice comment. Have a great day.
@irafowlerjr.7492
3 жыл бұрын
You do a great job, really make it simple. Thanks
@UBRArsenal
3 жыл бұрын
Hey Ira, I’m happy to hear you liked this video. Thanks for watching my videos and leaving a comment. I hope you have a great day.
@joethestrat
4 жыл бұрын
I know I'm late, but solid video brother. No nonsense, proper terms and some cool low-key background techno music. Good stuff haha
@UBRArsenal
4 жыл бұрын
I'm glad you liked my video. Thanks for watching and leaving an awesome comment. Don't forget to subscribe. ;)
@joethestrat
4 жыл бұрын
@@UBRArsenal Liked + subbed, now sharing. 🙂👍
@UBRArsenal
4 жыл бұрын
@@joethestrat You're the man, thanks for everything.
@viccrown8188
2 жыл бұрын
Thank you for making this.
@UBRArsenal
2 жыл бұрын
Hi Josh, you’re very welcome. I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
@Rman10102
5 жыл бұрын
Awesome just did it live, THANK YOU SIR, from Michigan
@UBRArsenal
5 жыл бұрын
You're very welcome and thanks for watching!!
@maxsittenfeld1839
2 жыл бұрын
Great job! Thank you for your time and very good video.
@UBRArsenal
2 жыл бұрын
Hi Max, I'm glad you liked the video and it helped out. Thanks for watching and leaving a comment. Have a great day.
@kuntakinte1416
5 жыл бұрын
i feel like James Bond right now lolol
@denverspottedbear8878
3 жыл бұрын
Righteous. Thank you
@UBRArsenal
3 жыл бұрын
Glad you like my video. Thanks for the comment and for watching. I hope you subscribed. :)
@ludlowwilliams8180
Жыл бұрын
You are a good teacher you demonstrates so well..
@UBRArsenal
Жыл бұрын
I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day. 👍🏼🤜🤛
@BlackSkuLL4u2
4 жыл бұрын
Dam this is the best guide on breaking down the sig p320 i just bought a m17 coyote last week and notice ppl were having trouble and some even breaking there guns cause they didnt know how to properly break down the gun good to know something before even messing with it thanks for all ur info💪😎
@UBRArsenal
4 жыл бұрын
I'm so glad my video helped. Thanks for watching and for the great feedback. Don't forget to subscribe. :)
@JayDonII
5 жыл бұрын
Great step by step follow along video.
@UBRArsenal
5 жыл бұрын
Thanks for watching and for leaving a great comment.
@jayuihlein1664
Жыл бұрын
Excellent, video. Thak you for solving this mystery for me. A+
@UBRArsenal
Жыл бұрын
Hey Jay, I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day. 🤜🤛
@philipmargotta8865
Жыл бұрын
Fabulous detailed video I really enjoyed it and needed it as I bought it used with no instructions. Thanks for talking slow.
@UBRArsenal
Жыл бұрын
Hey Philip, I’m so glad the video helped out. Thanks for watching and leaving a comment. Have a great day. 🤜🤛
@cjfisher47
3 жыл бұрын
I can see for the picture this is an older model. Look into a free trigger upgrade by Sig Sauer to avoid unintended discharge, a rare but apparently real concern. Includes lighter trigger and sear tweaks.
@UBRArsenal
3 жыл бұрын
Thanks for the heads up but I no longer own this p320. I'm looking to get a new p320 really soon. I hope I can find one and for a good price. Thanks for watching and I hope you subscribed. :)
@konradcurze6613
2 жыл бұрын
Very useful! Thank you very much!
@UBRArsenal
2 жыл бұрын
Hi Konrad, I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day and please tell your friends about the channel. 😁🤜🏼🤛🏼
@tarheadzg8268
2 жыл бұрын
Excellent work. Nicely done.
@UBRArsenal
2 жыл бұрын
Hi Tar, Im glad you like the video. Thanks for watching and leaving a comment. Have a great day!
@northernpines
Жыл бұрын
BIG help. Thanks!
@UBRArsenal
Жыл бұрын
I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day. 👍🏼🤜🤛
@ry762_
Жыл бұрын
Great video! Would have loved if you were more specific in the video about placing the rod spring vertically spent 30 mins panicking if I broke my sig or not😭😂
@UBRArsenal
Жыл бұрын
Hey RY, I'm glad you liked the video. This video is for the older P320’s where you didn't have to worry about how to insert the recoil spring. The link below will take you to the new p320 field strip video. This will show which orientation the recoil spring has to be in. Sorry for the confusion. Have a great day. How to Disassemble and Reassemble ZEV Z320 (Newer SIG P320 XCompact) (Field Strip) kzitem.info/news/bejne/tp6tq2qDfKafhWU
@strawhatironpp7524
Жыл бұрын
Thanks a lot for this video man ♥️
@UBRArsenal
Жыл бұрын
Hey man, I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day. 🤜🏼🤛🏼
@strawhatironpp7524
Жыл бұрын
@@UBRArsenal This helped out so much man, Literally just had my exam on a sig p320, this video probably just saved me. Have A Blessed day 🙏
@JeffElkins
5 жыл бұрын
Well done! Very thorough.
@UBRArsenal
5 жыл бұрын
Thanks for the positive feedback! Have a great day!
@ahcentury
4 жыл бұрын
Excellent video
@UBRArsenal
4 жыл бұрын
Thanks for the great comment and thanks for watching. Don't forget to subscribe. ;)
@bentstrider
6 ай бұрын
Had a brainfart and forgot how to place the slide back on the frame. Simple things like that lever in the frame before putting the slide on are quickly forgotten😂😂
@UBRArsenal
6 ай бұрын
I'm glad the video helped out. Thanks for watching and leaving a comment. Have a great day. 👍🏼
@alexsher7323
3 жыл бұрын
very explanatory video ty
@UBRArsenal
3 жыл бұрын
Hi Alex, Im glad you like the video. Thanks for watching and leaving a comment. Have a great day.
@davehamel9298
3 жыл бұрын
Good job and clearly presented
@UBRArsenal
3 жыл бұрын
Glad it was helpful! Thanks for leaving a nice comment and I hope you subscribed. :)
@icemanbmf1952
Жыл бұрын
Thank you so much😂i couldn’t figure it out
@UBRArsenal
Жыл бұрын
Hey Ice, I’m so glad the video helped out. Thanks for watching and leaving a comment. Have a great day. 👍🏼
@jeffbey7
2 жыл бұрын
thanks , helped a whole lot
@UBRArsenal
2 жыл бұрын
Hi Jeff, I'm glad you thought the video was helpful. Thanks so much for watching and leaving a comment. Have a great day.
@TheJoel880
6 жыл бұрын
Thank you very much for this helpful and informative video.
@UBRArsenal
6 жыл бұрын
Thanks for watching my video and for the awesome comment!
@taztherocker1
3 жыл бұрын
Thank you for this video. I subscribed.
@UBRArsenal
3 жыл бұрын
Hi Taz, you’re welcome. I’m really glad you liked the video. Thanks for taking the time to leave a nice comment and thanks for subscribing. Have a great day!
@jeboteya5489
4 жыл бұрын
Perfect tutorial 👌🏻
@UBRArsenal
4 жыл бұрын
Thanks so much for the positive feedback. Thanks for watching and hope you subscribed. :)
@joshfurner7714
2 жыл бұрын
Well springing when I'm reading the burrow sticking out
@philyamascunt7518
2 жыл бұрын
Did anyone else get a "Surprise" when the FCG was removed and I flipped the FCG left side down and got a pin deposited in my hand? I figured that pin would be an interference fit so it wont just fall out like mine did but Sig knows a lot more than I do about engineering firearms but being a machinist and then in industrial maintenance I wasn't expecting that pin landing in my palm. I put the pin in the only hole that was visible and I put the pin in left to right
@robert_costello
3 жыл бұрын
Thank you for that informative video. 👍🏼
@UBRArsenal
3 жыл бұрын
I'm glad my video helped. Thanks for the comment and I hope you subscribed.
@zoutou123
3 жыл бұрын
very helpful - thanks
@UBRArsenal
3 жыл бұрын
Hi Ivan, I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
@allanlopez3709
Жыл бұрын
bless your soul
@UBRArsenal
Жыл бұрын
I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
@johnlester5838
Жыл бұрын
Great video on Disassemble Sig P320. Now how to disassemble the P320 Mas firing pin? thanks,
@UBRArsenal
Жыл бұрын
Hey John, thanks man. I’ll have to make a disassemble firing pin video. Thanks for the suggestion. Thanks for watching and leaving a comment. Have a great day.
@rafaelramos1486
Жыл бұрын
Well explained
@UBRArsenal
Жыл бұрын
I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
@tombeck2884
3 жыл бұрын
Perfect video
@UBRArsenal
3 жыл бұрын
Hi Tom, I'm really glad you liked the video. Thanks for watching and leaving a nice comment. Have a great day.
@glenhorner1428
2 жыл бұрын
Awesome. Thank You much!!
@UBRArsenal
2 жыл бұрын
Hi Glen, I’m glad you like the video and you’re very welcome. Thanks for watching and leaving a comment. Have a great day and please tell your friends about the channel. 😁🤜🏼🤛🏼
@glenhorner1428
2 жыл бұрын
Absolutely
@MBotha
2 жыл бұрын
Thanks mate, 👍
@UBRArsenal
2 жыл бұрын
Hi M, thank you for watching and leaving a comment. Have a great day.
@Damingo63088
24 күн бұрын
Thank you.
@UBRArsenal
24 күн бұрын
I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.
@jenterialatta4150
5 жыл бұрын
now that everything is together and in place and once the mag is in I can't turn the takedown lever to the 6oclock position because of the magazine
Пікірлер: 409