We will be making these for my daughter"s wedding. Your instructions are simple and diy friendly. Thank you for sharing.
@kaylaxshonie
2 жыл бұрын
No Problem. I'm sure it will turn out great.
@harpergirlcreative3396
2 жыл бұрын
Absolutely beautiful! I love how you used different painting styles on the back to add interest. Great job!
@katherinebass995
Жыл бұрын
Looks very easy. Thank you for sharing.
@samanthasmith2329
Ай бұрын
Love it but what did you use to make the vinyl stick to the mat before cutting you used the scraper to secure it to the mat to keep it from moving but did you have to pull the backing off the vinyl first (something we wouldn't usually do) need to know this step any help would be greatly appreciated. Thank you.
@kaylaxshonie
Ай бұрын
You don't pull off the backing. The Mats for the circuit is tacky so it will hold the Vinyl on it. The mat is like big Sticker almost.
@azucenachavezheredia2898
Жыл бұрын
I loved this it turned out amazing 🤗
@lalitabrown1006
2 жыл бұрын
I gotta say this is so much easier than card stock…. Thank you so much for sharing… #new subscriber
@keyawright6736
Жыл бұрын
Detailed video on the fonts & sizes of this & also, did you have to 'mirror' the font before printing these using Cricut on the foil vinyl?
@kaylaxshonie
Жыл бұрын
We will do a detailed video on fonts and sizes very soon and no we did not mirror the font.
@keyawright6736
Жыл бұрын
What pressure did you use for the blade cutting on the cricuit design?
@kaylaxshonie
Жыл бұрын
@@keyawright6736 we cut it on the vinyl setting.
@miattasonii4888
2 жыл бұрын
Nice job !! Would love to see the design process
@mrsmartinez2023
2 жыл бұрын
Did you use foil or vynil? Also uou said cut it, does thst mean cut the foil?
@kaylaxshonie
2 жыл бұрын
We used vinyl. What part are you referring to when you asked about us saying cut it?
@sugarnspicesnet
Жыл бұрын
Hello! Did you use the acrylic for the names on top of the menu
@kaylaxshonie
Жыл бұрын
We ordered those off of Etsy. However, we will be making a video on how to DIY those soon.
@nicolesamuels7591
2 жыл бұрын
Thanks for sharing. How did you do the names?
@kaylaxshonie
2 жыл бұрын
Hey Nicole we actually ordered the names on Etsy. But we will do a video soon on how to DIY them.
@willynecherubin1111
7 ай бұрын
What font did you use? I would like a more detailed video. Thank you,
@Sbritford07
Жыл бұрын
Do you have to use a certain pen to cut the foil for the cricut?
@kaylaxshonie
Жыл бұрын
No we just used a new blade.
@jenbianchi2428
2 жыл бұрын
This was a great tutorial, thank you!!
@doriamcduell5197
2 жыл бұрын
Hi. What setting do you cut on to make sure your vinyl doesn’t come off the board?
@kaylaxshonie
2 жыл бұрын
We had the setting on vinyl. Be sure to use a new blade.
@yattay2k
Жыл бұрын
Did you ever get to making a video of how you made the lettering with cricut?
@kaylaxshonie
Жыл бұрын
No we didn't but we will be making one this month. We did use a custom font for this project but in the upcomimg video we will talk about how to choose your font.
@saras5693
5 ай бұрын
Do you have a video on how to make those acrylic name Plates?
@kaylaxshonie
5 ай бұрын
We ordered the names from a shop on ETSY. It should not be hard to DIY if you have a Circuit. You would just have to make sure to get a blade that can cut acrylic. I will try making a video soon that will show how you can DIY them.
@mzkia7941
2 жыл бұрын
Hello, Do you have a tutorial on how to make the names at the top of your menu?
@kaylaxshonie
2 жыл бұрын
Hey Mz Kia, we actually purchased the name plates from Etsy. However, we plan to post a video on how to DIY it soon.
@rachellejean5145
2 жыл бұрын
You didddddd tht !!!! Omg thank you
@keyawright6736
Жыл бұрын
I'm using Premium Vinyl & fine cut w/a new blade. It's cutting too hard. What am I doing wrong? How can I fix?
@kaylaxshonie
Жыл бұрын
Try going down to the lowest setting which is paper and see if that helps.
@keyawright6736
Жыл бұрын
I will retry again 😊😁
@MrsJudithhebe
2 жыл бұрын
Can you share what is the tiny font? Thank you! Beautiful design
@kaylaxshonie
2 жыл бұрын
Hey Judith, the small word font was arial rounded mt bold (11pt).
@alicialawson508
3 жыл бұрын
Nice job ladles
@theresapearson9569
2 жыл бұрын
This is awesome ❤️
@MRSLL07
2 жыл бұрын
So I am so stuck my words don't stay once it cuts and I try to peel the vinyl everything comes up. What am I doing wrong
@kaylaxshonie
2 жыл бұрын
Try using a bigger font and a new blade. Also, do not skip the step at 3:54. That step is really important when making sure the words don't come up. Be sure to go slow when you peel the vinyl. If you see any letters coming up lay the vinyl back down and repeat 3:54 on the word/letters coming up. We hope this helps.
@ladecc
8 ай бұрын
Thx for sharing
@dytashabanks7871
Жыл бұрын
Can u tell me wts the measurements u put the computer on
@asiasmith4094
2 жыл бұрын
I’m trying to print a little bit bigger letters than this and the letter keeps coming off while cutting can you help
@kaylaxshonie
2 жыл бұрын
Try changing to a fresh blade and see if that helps.
@livelovescratch9089
3 жыл бұрын
Love it!
@daisjahjanae04
2 жыл бұрын
I tried this but all my wording came off 😩 can you make a tutorial on how you designed this in the circuit design space?
@kaylaxshonie
2 жыл бұрын
We plan to make another video to show how to design in circuit space really soon. Tips: use a bigger font. Try to make sure the letters in the font have a little space between them. Also, use a new blade. We hope these tips help.
@Autumnarria
10 ай бұрын
Is there a video on how you did the menu In design space?
@kaylaxshonie
10 ай бұрын
No but we plan to make one.
@ntbaybee
2 жыл бұрын
What size acrylic sheet did you use?
@kaylaxshonie
2 жыл бұрын
They were 4x6. There is a link in the description box if you want to purchase the same ones.
@jessjhons5260
Жыл бұрын
It is beautiful but omg it takes so much work. I am not gonna be able to make 50
@rickeydacarter1913
2 жыл бұрын
Do you remember what font you used?
@kaylaxshonie
2 жыл бұрын
Hey Rickeyada, the small word font was arial rounded mt bold (11pt). The fonts for 'Menu' and the subtitles were custom fonts that we downloaded.
@Rennie998
2 жыл бұрын
Hey can you do a video on how to do the personalised names that is above the menu please
@kaylaxshonie
2 жыл бұрын
We actually purchased the name plates from Etsy. However, we plan to post a video on how to DIY it soon.
@asiakayy9044
2 жыл бұрын
Hey I did a remake of your angel wing arrangement I was trying to email you the pics but it says something’s wrong with that email
@kaylaxshonie
2 жыл бұрын
Hey Asia, we would love to see it. The email is kaylaxshonie@gmail.com. Is that the one you tried?
@prwettyprincess
2 жыл бұрын
Please go more into detail about how to put your wording and design space I am struggling
@kaylaxshonie
2 жыл бұрын
We will be making something similar soon and we will go into more details.
@danishanelson7744
2 жыл бұрын
How long did this take?
@kaylaxshonie
2 жыл бұрын
It took a few hours because we had to let the paint dry and the Cricut had to cut each one. It goes faster when you cut two at a time.
@kym8977
2 жыл бұрын
Help can you make video from start to finish please
@keyawright6736
Жыл бұрын
What size Font ?
@keyawright6736
Жыл бұрын
I put the blade cut on less & it still cut too much. Even tho I peeled words b4 but w/this project.. All My words didn't peel right so I gave up for the moment
@keyawright6736
Жыл бұрын
I got the perfect font too just playing around w/it but the letters didn't pull off right🥹
@kaylaxshonie
Жыл бұрын
@@keyawright6736 be sure to use a fresh blade. We had that problem but it was better with a new blade. Also use your picker tool for stubborn letters and pull the extra vinyl off slowly.
@keyawright6736
Жыл бұрын
Thank You!
@ladecc
8 ай бұрын
I would like to get the video plz and ty
@mommytoaprinceandprincess5535
2 жыл бұрын
What fonts did you use?
@kaylaxshonie
2 жыл бұрын
The small words font was arial rounded mt bold (11pt). The fonts for 'Menu' and the subtitles were custom fonts that we downloaded.
@mommytoaprinceandprincess5535
2 жыл бұрын
@@kaylaxshonie Thank you so much ❤️❤️❤️
@jennygiallanza4524
5 ай бұрын
Knife and spoon go on the right and the knife blade needs to face the plate. Just some advice from a professional event planner
Пікірлер: 74