I know so many shortcuts to make that process shorter but. No cap. The best video I've ever watched on KZitem. I learnt from your process and I learnt from your errors. How can I get such a great experience from learning something. Thanks a lot. I hope you're considering creating more content because this helped me a lot. I knew nothing about these roofs but learnt so much and I haven't even finished yet. (Exam in 8 hrs.)
@mr.cargill
3 жыл бұрын
Thank you so much for the kind words. I do plan on creating more content. I've just been researching as a few of my videos need updating. Including this one, I hope the exam was ok.
@noahwilson759
Жыл бұрын
Thank you every much for your help…❤❤love form Grenada 🇬🇩🇬🇩
@mr.cargill
Жыл бұрын
You are welcome. Thanks for the kind words.
@keannajames2130
3 жыл бұрын
Thank you so much sir ... it really helped me in my SBA
@mr.cargill
3 жыл бұрын
You're welcome. Glad I could help.
@ryanpusey902
11 ай бұрын
This video help mi a lot .thanks 🙏
@mr.cargill
11 ай бұрын
You are welcome.
@rodgerallen5896
3 жыл бұрын
thanks for the video F enter,M enter join lines at any angle,also MODIFY and select join would lines to become as one
@mr.cargill
3 жыл бұрын
Thank you so much for the information and I'm glad you found the video helpful. J enter can also be used for joining lines.
@rodgerallen5896
3 жыл бұрын
Sure
@dominichamilton463
4 жыл бұрын
I have learnt a lot Thank you
@zamanicollins6940
Жыл бұрын
hi what if you are doing a square building do you follow the same measurements
@mr.cargill
Жыл бұрын
Good day. Yes you would. You would end up with a pyramid roof.
@zamanicollins6940
Жыл бұрын
@@mr.cargill oh thank you
@mr.cargill
Жыл бұрын
@@zamanicollins6940 You're welcome.
@adebad1
4 жыл бұрын
Hi Mr Cargill, thanks for your video. Just to clarity does the hip rafter always have to be at 45deg? if not how do you determine the angle?
@malikplayz4425
4 жыл бұрын
Hey. I think by standard they should always be 45 degrees
@mr.cargill
2 жыл бұрын
I am so sorry that I am just seeing your comment but yes the standard is 45
@polaraligned1
Жыл бұрын
The angle of the hip depends on the angle of the 2 roof sections it is joining. If they are the same pitch, then it is 45 degrees. If they are different pitches, then it will vary depending on the pitchs.
@clintonyounge2817
3 жыл бұрын
THANKS YOU VERY MUCH FOR THE VIDEO!!!!!
@mr.cargill
3 жыл бұрын
Happy to help.
@devalliongreen5320
2 жыл бұрын
Excellent Content
@malikplayz4425
4 жыл бұрын
When I do the 45 degree lines from one side, they don't line up with 45 degree lines in the other corner
@mr.cargill
4 жыл бұрын
Good day, if you mean that your 45 degree lines on the left are not meeting up with the ones one right exactly in the centre then you would have to check to ensure that your roof or the section of the roof that you are drawing is a perfect rectangle. If you're saying that the 45 degree lines are not meeting up with the ones in the opposite corner, this will only happen if your building is square and that would be a pyramid roof and not a hip roof like the one in the video. Let me know if my comment helped.
@malikplayz4425
4 жыл бұрын
@@mr.cargill Hello. The section of the roof is a perfect rectangle, but I am not sure why they aren't meeting
@mr.cargill
4 жыл бұрын
@@malikplayz4425 send me the drawing that that you are doing . My email is dontaecargill@gmail.com. I will look at it and tell you what's wrong.
@malikplayz4425
4 жыл бұрын
@@mr.cargill Thank you for taking the time out! I just sent it!
@gregorygooden1086
2 жыл бұрын
I need a roof are you still doing it
@mr.cargill
2 жыл бұрын
Good day. Yes.
@mr.cargill
2 жыл бұрын
email me dontaecargill@gmail.com
@beautyfavour5177
4 жыл бұрын
Thank you
@mr.cargill
4 жыл бұрын
You are welcome
@akon9819
Жыл бұрын
Why don't you have Hip Gurder Trusses?
@mr.cargill
Жыл бұрын
This is a simple hip roof design
@romarriorumble345
4 жыл бұрын
How do you draw a slab roof plan?
@mr.cargill
4 жыл бұрын
Sorry for the late reply. The slab roof would be flat and there would not be any rafters.
@romarriorumble345
4 жыл бұрын
@@mr.cargill could you do a video showing the steel layouts please
@Josh-wc3sr
3 жыл бұрын
why didn't you just fillet the lines instead of extending them and trimming them
@mr.cargill
3 жыл бұрын
Not sure exactly which part of the video you are referring to but there is more than way to do a lot of things in AutoCAD and suggestions are always welcome so thank you Josh.
@jaleelwilliams9209
7 ай бұрын
Show the valley and ridge board
@mr.cargill
7 ай бұрын
The ridge is shown and this is a simple hip roof so there are no valleys. Here is a link to a video that explains how to draw the ridge details kzitem.info/news/bejne/wGZ_znywqJ58m4osi=1CsWl5glDBAF448m
@Grim5fboss
7 ай бұрын
Ty
@mr.cargill
7 ай бұрын
You're welcome.
@mathewwangsu4251
3 жыл бұрын
Long process ....we can use fillet command instead of stretching line
@mr.cargill
3 жыл бұрын
Yes Mathew that is indeed a quicker way of doing it.
@RSMITH-sp2rt
5 жыл бұрын
greeeeat
@RSMITH-sp2rt
5 жыл бұрын
good comment
@RSMITH-sp2rt
5 жыл бұрын
you should subscribe
@ghur.
2 жыл бұрын
exam in 3 hours. give thanks 🙏
@mr.cargill
2 жыл бұрын
You're welcome. How was it?
@dominichamilton463
4 жыл бұрын
Y didn’t you jus turn off the floor plan
@mr.cargill
4 жыл бұрын
The floor plan has to be represented in the roof plan in broken lines and also you need the outer walls of the floor plan to get the overhang of the roof. Turning off the floor plan after getting the overhang could be done though.
@jasonhall9588
3 жыл бұрын
how about a flat roof
@mr.cargill
3 жыл бұрын
For the flat roof you will draw any rafters, just draw the roof outline. When you do a section through the roof you will have to show the steel work
@jasonhall9588
3 жыл бұрын
@@mr.cargill ok thanks much. so that means I would not add a concrete or steel hatch
@mr.cargill
3 жыл бұрын
@@jasonhall9588 No, that would be shown in the detail drawing
Пікірлер: 64